Products of PRIO
Categories with products from PRIO
- Electrics ➤ Installation ➤ Fire barriers, fire protection compound ( 1 )
- Electrics ➤ Installation ➤ Install Outlets and Accessories ➤ For brick / hollow wall / concrete installation boxes ( 31 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 1 )
- Electrics ➤ Installation ➤ Pipes ➤ PVC - Conduit ( 1 )
- Technology ➤ Tools ➤ Miscellaneous ( 46 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 6 )
 |
PRIO P850 P850PRIO P850 Primo diamond core bit 82mm With our 82 mm diamond core bit you can drill into both masonry and lightweight concrete. The high load-bearing capacity and durability of the product make the core bit a true all-rounder. It can even ... Lieske Part No.: 679741 Mfg Part No: P850 |
89,89 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P851 P851PRIO P851 Primo diamond core bit soft impact 82mm We have our diamond core bit in our range especially for dry drilling in concrete and sand-lime brick. Due to the special arrangement of the diamonds, this core bit is suitable for drills with soft ... Lieske Part No.: 679747 Mfg Part No: P851 |
123,06 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P854 P854PRIO P854 Primo open-end wrench for high-speed Single open-end wrench SW 24. Lieske Part No.: 679751 Mfg Part No: P854 |
10,99 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P855 P855PRIO P855 Primo Extractor for high speeds Dust extraction for center drills. Lieske Part No.: 679754 Mfg Part No: P855 |
121,55 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P856 P856PRIO P856 Primo Center drill for high speed 70mm Center drill for high-speed drills with a usable length of 70 mm for masonry, soft concrete and sand-lime brick Lieske Part No.: 679757 Mfg Part No: P856 |
30,24 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P857 P857PRIO P857 Primo Drill-Fixx and drilling template set The set consists of: 2 x Bohr-Fixx (P794), 2 x edge countersinks 68 mm (P779-02) and 2 x drilling template for cavity wall box (P102). Lieske Part No.: 683313 Mfg Part No: P857 |
478,55 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P857-74PRIO P857-74 Primo Bohr-Fixx u.Bohrschablone Set 74mm Verkaufseinheit: 1 ST. Lieske Part No.: 1247311 Mfg Part No: P857-74 |
481,54 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
|
PRIO P858 P858PRIO P858 Primo formwork protector Quickstar The Quickstar formwork protector is a clever helper in concrete construction to ensure safe and stable transitions in no time at all. The pre-assembled nails supplied guarantee quick assembly and the ... Lieske Part No.: 684260 Mfg Part No: P858 |
-55% 68,12 EUR 150,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
PRIO P870 P870PRIO P870 Primo XL 150 built-in housing The XL 150 installation housing is used for installing LEDs, low-voltage halogens, energy-saving lamps, metal halide lamps and compact fluorescent lamps. The installation housing is suitable for ... Lieske Part No.: 2094063 Mfg Part No: P870 |
-98% 11,91 EUR 764,93 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
|
PRIO P871 P871PRIO P871 Primo XL 200 installation housing The XL 200 installation housing is used for installing LEDs, low-voltage halogens, energy-saving lamps, metal halide lamps and compact fluorescent lamps. The installation housing is suitable for ... Lieske Part No.: 679779 Mfg Part No: P871 |
-85% 182,54 EUR 1.207,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P872 P872PRIO P872 Primo XL 250 flush-mounted housing The XL 250 installation housing is used for installing LEDs, low-voltage halogens, energy-saving lamps, metal halide lamps and compact fluorescent lamps. The installation housing is suitable for ... Lieske Part No.: 679781 Mfg Part No: P872 |
-85% 653,61 EUR 4.324,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P873 P873PRIO P873 Primo XL 150/200/250 transformer tunnel The universal transformer tunnel for the XL 150, XL 200 and XL 250 installation housings offers space for the installation of additional electronic components. LEDs, low-voltage halogen, energy-saving ... Lieske Part No.: 679782 Mfg Part No: P873 |
-85% 167,91 EUR 1.111,07 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P874 P874PRIO P874 Primo XL 150 front part with mineral fibre plate The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. In order to enable individual drilling holes ... Lieske Part No.: 679783 Mfg Part No: P874 |
-98% 19,68 EUR 1.264,27 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
|
PRIO P875 P875PRIO P875 Primo XL 200 front part with mineral fibre plate The XL 200 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. In order to enable individual drilling holes ... Lieske Part No.: 679785 Mfg Part No: P875 |
-85% 216,75 EUR 1.434,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P876 P876PRIO P876 Primo XL 250 front part with mineral fibre plate The XL 250 installation housing is used for installing LEDs, low-voltage halogens, energy-saving lamps, metal halide lamps and compact fluorescent lamps. In order to enable individual drilling holes ... Lieske Part No.: 679786 Mfg Part No: P876 |
-92% 142,88 EUR 1.890,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P877 P877PRIO P877 Primo XL 150 front part 68mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If a 68 mm round installation opening is ... Lieske Part No.: 679788 Mfg Part No: P877 |
-98% 6,37 EUR 409,39 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
|
PRIO P878 P878PRIO P878 Primo XL 150 front part 75mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If a 75 mm round installation opening is ... Lieske Part No.: 679789 Mfg Part No: P878 |
-85% 63,73 EUR 421,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P879 P879PRIO P879 Primo XL 150 front part 85mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If an 85 mm round installation opening is ... Lieske Part No.: 679790 Mfg Part No: P879 |
-85% 63,73 EUR 421,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P880 P880PRIO P880 Primo XL 150 front part 80mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If an 80 mm round installation opening is ... Lieske Part No.: 679792 Mfg Part No: P880 |
-85% 63,73 EUR 421,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P881 P881PRIO P881 Primo XL 150 front part 90mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If a 90 mm round installation opening is ... Lieske Part No.: 679793 Mfg Part No: P881 |
-85% 63,73 EUR 421,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P883 P883PRIO P883 Primo XL 150 front part 95mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If a 95 mm round installation opening is ... Lieske Part No.: 679796 Mfg Part No: P883 |
-85% 63,73 EUR 421,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P884 P884PRIO P884 Primo XL 150 front part square 68mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If a 68 mm square installation opening is ... Lieske Part No.: 679798 Mfg Part No: P884 |
-85% 63,73 EUR 421,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P885 P885PRIO P885 Primo XL 150 front part square 75mm The XL 150 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If a 75 mm square installation opening is ... Lieske Part No.: 679799 Mfg Part No: P885 |
-85% 63,73 EUR 421,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
PRIO P886 P886PRIO P886 Primo XL 200 front part 100mm The XL 200 installation housing is used for installing LEDs, low-voltage halogen, energy-saving lamps, metal halide lamps and compact fluorescent lamps. If a 100 mm round installation opening is ... Lieske Part No.: 679803 Mfg Part No: P886 |
-85% 86,99 EUR 575,62 EUR
plus delivery charges
Delivery time on requestinfo_outline
|