Terminals in Connection technology

Sales unit: 25 pieces
Lieske Part No.: 401010

Vertical jumper, insulated, light grey
Lieske Part No.: 1133764

TOPJOB®SL test plug module, stackable, for jumper slots, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1352071

TOPJOB®SL test plug module, stackable, for jumper slots, 1-pole, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1949772

3-wire actuator terminal, for NPN (minus) switching actuators, with PE via comb jumper,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 386626

3-conductor actuator terminal, for PNP (plus) switching actuators, with PE via push-in jumper bar, with color-printed conductor entries, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 1948500

3-wire actuator terminal, yellow LED, for NPN (minus) switching actuators, with PE via comb jumper,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 347839

3-wire actuator terminal, yellow LED, for PNP (plus) switching actuators, with PE via push-in jumper bar, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948503

Pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 347100

3-wire initiator terminal, yellow LED, for NPN (minus) switching initiators,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal
Sales unit: 50 pieces
Lieske Part No.: 347862

3-wire initiator terminal, yellow LED, for PNP (plus) switching initiators,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 347874

3-conductor actuator terminal, for NPN (minus) switching actuators, with PE connection, with color-printed conductor entries, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², gray
Sales unit: 50 pieces
Lieske Part No.: 1948499

3-wire actuator terminal, for PNP (plus) switching actuators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 387816

3-wire actuator terminal, yellow LED, for NPN (minus) switching actuators, with PE connection, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948502

3-wire actuator terminal, yellow LED, for PNP (plus) switching actuators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 350491

3-wire initiator feed terminal, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 348063

3-wire initiator feed terminal, green LED, for PNP (plus) switching initiators, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 374460

3-wire actuator feed terminal, for NPN (minus) switching actuators, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables connection from Z. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 348057

3-wire actuator feed terminal, for PNP (plus) switching actuators, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables connection from Z. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 378127

3-wire initiator feed terminal, internal bridging,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 377515

3-wire initiator feed terminal, LED green,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 349941

3-wire actuator feed terminal, for NPN (minus) switching actuators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 378629

3-wire actuator feed terminal, for PNP (plus) switching actuators, with PE connection, internal bridging,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 376401

End and intermediate plate 1 mm thick for 3-wire terminals, gray
Sales unit: 25 pieces
Lieske Part No.: 386434

4-wire initiator terminal, with PE via comb jumper,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 385948

4-wire initiator terminal, yellow LED, for NPN (minus) switching initiators, with PE via push-in jumper, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948524

4-wire initiator terminal, yellow LED, for PNP (plus) switching initiators, with PE via push-in jumper, 1 mm², Push-in CAGE CLAMP®, 1.00 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1948525

4-wire initiator terminal, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 385943

4-wire initiator terminal, yellow LED, for NPN (minus) switching initiators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 350261

4-wire initiator terminal, yellow LED, for PNP (plus) switching initiators, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g . B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 50 pieces
Lieske Part No.: 350260

4-wire initiator feed terminal, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 378335

4-wire initiator feed terminal, green LED, for PNP (plus) switching initiators, with PE connection, feed on the control cabinet side,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
Twice the pitch width of this terminal family allows you to connect e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 348009

4-wire initiator feed terminal, with PE connection, internal bridging,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 348055

4-wire initiator feed terminal, green LED, with PE connection,
pitch width 3.5 mm per signal (2 x 3.5 mm = 7 mm)
The double pitch width of this terminal family enables the connection of e.g. B. ten sensors with only five initiator terminals plus one feed terminal.
Sales unit: 15 ST.
Sales unit: 15 pieces
Lieske Part No.: 378933

Blind module, can be connected in series, for skipping bridged terminals, for example, grey
Sales unit: 25 pieces
Lieske Part No.: 1949626

End and intermediate plate 1mm thick for 4-wire terminals gray
Sales unit: 25 pieces
Lieske Part No.: 386721

Modular TOPJOB®S connector, stackable, for jumper slots, 2-pin, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1352378

Modular TOPJOB®S connector, stackable, for jumper slots, 3-pin, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1352377

Modular TOPJOB®S connector, stackable, for jumper slots, 4-pin, 1.00 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 1949619

Modular TOPJOB®S connector, stackable, for jumper slots, 5-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949620

Modular TOPJOB®S connector, stackable, for jumper slots, 6-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949621

Modular TOPJOB®S connector, stackable, for jumper slots, 7-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949622

Modular TOPJOB®S connector, stackable, for jumper slots, 8-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949623

Modular TOPJOB®S connector, stackable, for jumper slots, 9-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949624

Modular TOPJOB®S connector, stackable, for jumper slots, 10-pin, 1.00 mm², grey
Sales unit: 10 pieces
Lieske Part No.: 1949625

2-wire feed-through terminal suitable for Ex e II applications grey
Lieske Part No.: 337748

2-wire feed-through terminal suitable for Ex e II applications orange
Sales unit: 100 pieces
Lieske Part No.: 773976

2-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², red
Sales unit: 100 pieces
Lieske Part No.: 949764

2-wire feed-through terminal suitable for Ex e II applications suitable for Ex i applications blue
Lieske Part No.: 150674

2-conductor feed-through terminal, 1.5 mm², suitable for Ex e II applications, side and center labeling, for mounting rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 1.50 mm², black
Sales unit: 100 pieces
Lieske Part No.: 1960308