Terminals in Connection technology

Linergy knife-edge terminal block, 4mm2, 20A, one level, 1x1, screw, grey.
Sales unit: 50 pieces
Lieske Part No.: 1586535

Linergy TR is a terminal block for Linergy. It belongs to the lock washer terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 600 V according to CSA/cURus and 500 V according to EN/IEC 60947-7-1. The rated current is 6.3A according to EN/IEC 60947-7-1, 6.3A according to CSA and 12A cURus. It has a black surface treatment. Assembly by clipping and side connection with 5x20mm fuse. Connection and disconnection can be done with a screwdriver. It is compatible with space enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (CSA, cURus, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850700

Linergy fuse disconnect terminal block, 4mm2, 6.3A, 1 Eb, 1x1, screw, black.
Sales unit: 50 pieces
Lieske Part No.: 1850699

Linergy TR is a terminal block for Linergy. It belongs to the lock washer terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 600 V according to CSA/cURus and 500 V according to EN/IEC 60947-7-1. The rated current is 6.3A according to EN/IEC 60947-7-1, 6.3A according to CSA and 12A cURus. It has a black surface treatment. Assembly by clipping and side connection with 5x20mm fuse. Connection and disconnection can be done with a screwdriver. It is compatible with space enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (CSA, cURus, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850698

Linergy fuse disconnect terminal block, 16mm2, 10A, 1 Eb, 1x1, screw, black.
Sales unit: 50 pieces
Lieske Part No.: 1850697

Linergy fuse disconnect terminal block, 16mm2, 10A, 1 Eb, 1x1, screw, black.
Sales unit: 50 pieces
Lieske Part No.: 1850701

Linergy knife-edge terminal block, 4mm2, 20A, 1 level, 1x1, screw, orange.
Sales unit: 50 pieces
Lieske Part No.: 1850772

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 4 mm², white. Pack of 50.
Sales unit: 50 pieces
Lieske Part No.: 1850779

Linergy terminal block for feed-through, 4mm2, 32A, 1 level, 1x2, screw, grey.
Sales unit: 50 pieces
Lieske Part No.: 1850762

Linergy TR is a terminal block for Linergy. It belongs to the Linergy feed-through terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 150V according to cURus, 500V according to EN/IEC 60947-7-1 and 352V according to ATEX Exe II Ex II 2 GD. The rated current is 32A according to EN/IEC 60947-7-1, 30A according to CSA/cURus and 29A according to ATEX Exe II Ex II 2 GD. It has a grey surface treatment. Snap-on assembly and side connection using single-level 1x1 screw terminals. Connection and disconnection can be done with a screwdriver. It is compatible with space enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (ATEX, CSA, cURus, DNV, GL, LR, IEC-Ex, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850774

Linergy TR is a terminal block for Linergy. It belongs to the Linergy feed-through terminal block with a nominal cross-section of 4 mm². The rated operating voltage is 600 V according to CSA/cURus, 800 V according to EN/IEC 60947-7-1 and 440 V according to ATEX Exe II Ex II 2 GD. The rated current is 30A according to EN/IEC 60947-7-1, 30A according to CSA/cURus and 25.5A according to ATEX Exe II Ex II 2 GD. It has a gray surface treatment. Assembly by snap-on and side connection by means of double-deck 1x1 screw terminals. Connection and disconnection can be done with a screwdriver. It is compatible with spatial enclosures for Prisma G, Prisma P, Pragma, Prisma PH, Prisma Pack, Spacial, Kaedra, TeSys. Sold in batches of 50 units. Ambient air temperature for operation is from -40 to 130 °C according to IEC 60216-1 and VDE 0304-T21. Certified according to several standards (ATEX, CSA, cURus, DNV, GL, LR, IEC-Ex, EAC). It is compliant with Green Premium (RoHS/REACH).
Sales unit: 50 pieces
Lieske Part No.: 1850790

Linergy earthing terminal, 4mm2, one level, 1x1, screw, green-yellow.
Sales unit: 50 pieces
Lieske Part No.: 1850702

Screw connection technology. Protective conductor terminal blocks. Screw terminal block, protective conductor, 4 points, 4 mm², double-deck. PU 50.
Sales unit: 50 pieces
Lieske Part No.: 1850703

Screw connection technology. Protective conductor terminal blocks. Screw terminal block, protective conductor, 2 points, 50 mm². PU 10.
Sales unit: 10 pieces
Lieske Part No.: 1850777

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 6mm². PU 50.
Sales unit: 50 pieces
Lieske Part No.: 1850778

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 6mm², blue. Pack of 50.
Sales unit: 50 pieces
Lieske Part No.: 1850761

Screw connection technology. Protective conductor terminal blocks. Screw terminal block, protective conductor, 2 points, 6mm². PU 50.
Sales unit: 50 pieces
Lieske Part No.: 1850690

Screw connection technology. Feed-through terminals. Screw terminal block, feed-through, 2 points, 70 mm². PU 10.
Sales unit: 10 pieces
Lieske Part No.: 1850776

Connector set for Modicon M171/M172 I/O expansion modules. Suitable for version with 14 I/O.
Lieske Part No.: 1859984

Connector set for Modicon M171/M172 I/O expansion modules. Suitable for version with 27 I/O.
Lieske Part No.: 1859983

Connector set for Modicon M172 I/O expansion modules. Suitable for version with 12 I/O.
Lieske Part No.: 1869197

Connector set for Modicon M172 PLC controllers. Suitable for version with 28 I/O.
Lieske Part No.: 1859798

Connector set for Modicon M172 PLC controllers. Suitable for version with 42 I/O.
Lieske Part No.: 1859797

Sales unit: 1 PC.
Lieske Part No.: 1859463

Accessories: Mounting accessories Support rail 3.065mm painted steel Housing painted steel Support rail system TRS 1000 EAN/GTIN:4041254205564
Lieske Part No.: 752004

Accessories: Mounting accessories Support rail 4.595mm painted steel Housing painted steel Support rail system TRS 1000 EAN/GTIN:4041254205571
Lieske Part No.: 857527

Accessories: Mounting accessories Connector galvanized steel for support rail connection Housing galvanized steel Support rail system TRS 1000 EAN/GTIN:4041254205588
Lieske Part No.: 903981

Accessories: Mounting accessories Swing hook galvanized steel for chain pendulum Housing galvanized steel Support rail system TRS 1000 EAN/GTIN:4041254205595
Lieske Part No.: 363228

Accessories: Mounting accessories Cover strip 1.538mm plastic housing Plastic mounting rail system TRS 1000 EAN/GTIN:4041254205618
Lieske Part No.: 127244

Accessories: Mounting accessories End cap (1 pair) Plastic housing Plastic mounting rail system TRS 1000 EAN/GTIN:4041254206110
Lieske Part No.: 597276

Accessories: Mounting accessories Luminaire suspension (1 pair) Galvanized steel Housing Galvanized steel Support rail system TRS 1000 EAN/GTIN:4041254206127
Lieske Part No.: 338325

Accessories: Mounting accessories Ceiling rail made of stainless steel for mounting rail fastening Housing made of stainless steel Mounting rail system TRS 2000 EAN/GTIN:4041254162195
Lieske Part No.: 265273

Accessories: Mounting accessories Ring nut stainless steel for chain pendulum Housing stainless steel Support rail system TRS 2000 EAN/GTIN:4041254162249
Lieske Part No.: 947585

Accessories: Mounting accessories Ceiling rail made of stainless steel for mounting rail fastening Housing made of stainless steel Mounting rail system TRS 2000 EAN/GTIN:4041254162256
Lieske Part No.: 933713

Accessories: Mounting accessories Luminaire suspension (1 pair) Stainless steel housing Stainless steel mounting rail system TRS 2000 EAN/GTIN:4041254162263
Lieske Part No.: 515247

N-/PE-Klemme throughout execution: for 3LD2
and 3LD2 2 Type: 3LD922-2B item:
ST.
Lieske Part No.: 858084

Verteilerblock 4-pol., 80A, 500V Eingang: 1x 6-16mm2 Ausgang: 8x 4-10mm2 für Hutschienenmontage Verteilerblock SENTRON 5ST2 als Zusatzkomponente für Fehlerstrom-Schutzeinrichtungen und Leitungsschutzschalter.Diese Zusatzkomponenten sind universell anbaubar. Sie lassen sich einfach und komfortabel montieren und anschließen. Dank des standardmäßigen Berührungsschutzes ist die Sicherheit bei der Installation zuverlässig gewährleistet.Optimale Technik für Ihre Sicherheit - nur von Siemens. Verkaufseinheit: 1 ST.
Lieske Part No.: 842153

Verteilerblock 4-pol., 160A, 500V Eingang: 1x 10-35mm2 Ausgang: 3x 6-25+8x 2,5-16mm2 für Hutschienenmontage Verteilerblock SENTRON 5ST2 als Zusatzkomponente für Fehlerstrom-Schutzeinrichtungen und Leitungsschutzschalter.Diese Zusatzkomponenten sind universell anbaubar. Sie lassen sich einfach und komfortabel montieren und anschließen. Dank des standardmäßigen Berührungsschutzes ist die Sicherheit bei der Installation zuverlässig gewährleistet.Optimale Technik für Ihre Sicherheit - nur von Siemens. Verkaufseinheit: 1 ST.
Lieske Part No.: 877163

Verteilerblock 1-pol., 160A, 690V Eingang: 1x 10-70mm2 Ausgang: 6x 2,5-16mm2 für Hutschienenmontage Verteilerblock SENTRON 5ST2 als Zusatzkomponente für Fehlerstrom-Schutzeinrichtungen und Leitungsschutzschalter.Diese Zusatzkomponenten sind universell anbaubar. Sie lassen sich einfach und komfortabel montieren und anschließen. Dank des standardmäßigen Berührungsschutzes ist die Sicherheit bei der Installation zuverlässig gewährleistet.Optimale Technik für Ihre Sicherheit - nur von Siemens. Verkaufseinheit: 1 ST.
Lieske Part No.: 842197

Connection module TP1 8 channels and 2x2 terminals for potential supply Type: screw terminal without LED, PU = 1 piece 16-pin IDC connection for cable The connection module TP1 for a 1-wire connection with 8 channels and potential connection with screw terminals without LED for signaling forms the interface between the connection cables of the I/O brought in from the field and the SIMATIC S7. This is mounted on the DIN rail and, thanks to its functionality with screw terminals, is precisely adapted to the respective task. This connection module is part of the fully modular connection of SIMATIC TOP connect for the fastest and safest system cabling. In addition to low wiring effort, sources of error in the cabling can be significantly reduced. Sensors and actuators from the I/O are connected to the connection modules of SIMATIC TOP connect and connected to the SIMATIC S7-300/1500 via a connecting cable and front connector module.
Lieske Part No.: 639838

Anschlussmodul TP1 M-Signal 32 Kanaele u. 4x2 Klemmen fuer Potenzialeinspeisung Art: Schraubklemme mit LED, VPE=1 Stueck 50pol. IDC Anschluss f. Ltg. Das Anschlussmodul TP1 M Signal für einen 1-Leiter-Anschluss mit 32 Kanälen und Potentialanschluss mit Schraubklemmen mit LED für die Signalisierung bildet die Schnittstelle zwischen den aus dem Feld herangeführten Anschlussleitungen der Peripherie und der SIMATIC S7. Dieses wird auf der Hutschiene montiert und ist dank seiner Funktionalität mit Schraubklemmen exakt an die jeweilige Aufgabe angepasst. Dieses Anschlussmodul ist Bestandteil des vollmodularen Anschluss von SIMATIC TOP connect für die schnellste und sicherste Systemverkabelung. Neben einem geringen Verdrahtungsaufwand können Fehlerquellen bei der Verkabelung deutlich reduziert werden. Sensoren und Aktoren aus der Peripherie werden an die Anschlussmodule von SIMATIC TOP connect angeschlossen und über Verbindungsleitung und Frontsteckmodul mit der SIMATIC S7-1500 verbunden. Verkaufseinheit: 1 ST.
Lieske Part No.: 831569

Anschlussmodul TP1 M-Signal 32 Kanaele u. 4x2 Klemmen fuer Potenzialeinspeisung Art: Schraubklemme mit LED, VPE=1 Stueck 50pol. IDC Anschluss f. Ltg. Das Anschlussmodul TP1 M Signal für einen 1-Leiter-Anschluss mit 32 Kanälen und Potentialanschluss mit Push-In-Klemmen mit LED für die Signalisierung bildet die Schnittstelle zwischen den aus dem Feld herangeführten Anschlussleitungen der Peripherie und der SIMATIC S7. Dieses wird auf der Hutschiene montiert und ist dank seiner Funktionalität mit Push-In-Klemmen exakt an die jeweilige Aufgabe angepasst. Dieses Anschlussmodul ist Bestandteil des vollmodularen Anschluss von SIMATIC TOP connect für die schnellste und sicherste Systemverkabelung. Neben einem geringen Verdrahtungsaufwand können Fehlerquellen bei der Verkabelung deutlich reduziert werden. Sensoren und Aktoren aus der Peripherie werden an die Anschlussmodule von SIMATIC TOP connect angeschlossen und über Verbindungsleitung und Frontsteckmodul mit der SIMATIC S7-1500 verbunden. Verkaufseinheit: 1 ST.
Lieske Part No.: 831568

14 WAY TEST PLUGS (2RMLB-R1) ANCILLARY EQUIPMENT MODULAR CASE TEST COMPONENTS TEST PLUGS (2RMLB-R) MULTI FINGER TEST PLUG COMPLETE WITH LEADS (2RMLB-R1) Verkaufseinheit: 1 ST.
Lieske Part No.: 840108

ALPHA 400/630/1250 DIN installation kit for installation devices, row spacing 125 mm H=450 mm, W=250 mm The ALPHA installation distributors - a complete system of wall and floor-standing distributors for the installation of devices up to 1250 A. The ALPHA distribution systems are tested according to IEC 61439. Due to the modular design and a common platform structure, the device-specific installation kits can be integrated into various distributor variants. This makes planning and assembly easier. The equipment is installed individually and project-specifically. The SIMARIS configuration software supports the planning through to the documentation of the energy distributors and installation distributors. The ALPHA distribution systems are available in a wide range of designs and in many special colors. The doors are available in either glass or steel. ALPHA - the system concept counts.
Lieske Part No.: 661433

Lieske Part No.: 133067

Cover, with lightning arrow, horizontal and vertical, terminal width: 6.2 mm, yellow, 1 mm2, 2.5 mm2 Terminal block connection technology for various industrial applications and modern building installations from Siemens. Regardless of whether you choose screw, tension spring, push-in or quick connection: All connection technologies can be freely combined with one another. The labeling and test accessories are standardized and can be used across the board. With the terminal blocks from SIEMENS, many applications in industrial, commercial and residential construction can be realized. This means you have the right connection technology for every connection. The Siemens terminal blocks are characterized above all by: 1. Permanently secure contact. 2. Easily detachable connection of electrical connections such as cables and lines. 3. Realization of a wide range of applications. 4. Convenient and simple assembly and connection technology. 5. Extensive and standardized accessories. 6. Reliable safety during installation thanks to standard touch protection. 7. Optimum technology for your safety - only from Siemens.
Sales unit: 50 pieces
Lieske Part No.: 662086

Cover, with lightning arrow, horizontal and vertical, terminal width: 6.2 mm, yellow, 4 mm2, 6 mm2 Terminal block connection technology for various industrial applications and modern building installations from Siemens. Regardless of whether you choose screw, tension spring, push-in or quick connection: All connection technologies can be freely combined with one another. The labeling and test accessories are standardized and can be used across the board. With the terminal blocks from SIEMENS, many applications in industrial, commercial and residential construction can be realized. This means you have the right connection technology for every connection. The Siemens terminal blocks are characterized above all by: 1. Permanently secure contact. 2. Easily detachable connection of electrical connections such as cables and lines. 3. Realization of a wide range of applications. 4. Convenient and simple assembly and connection technology. 5. Extensive and standardized accessories. 6. Reliable safety during installation thanks to standard touch protection. 7. Optimum technology for your safety - only from Siemens.
Lieske Part No.: 1316552

Cover, with lightning arrow, horizontal and vertical, terminal width: 6.2 mm, yellow, 16 mm2 Terminal block connection technology for various industrial applications and modern building installations from Siemens. Regardless of whether you choose screw, tension spring, push-in or quick connection: All connection technologies can be freely combined with one another. The labeling and test accessories are standardized and can be used across the board. With the terminal blocks from SIEMENS, many applications in industrial, commercial and residential construction can be realized. This means you have the right connection technology for every connection. The Siemens terminal blocks are characterized above all by: 1. Permanently secure contact. 2. Easily detachable connection of electrical connections such as cables and lines. 3. Realization of a wide range of applications. 4. Convenient and simple assembly and connection technology. 5. Extensive and standardized accessories. 6. Reliable safety during installation thanks to standard touch protection. 7. Optimum technology for your safety - only from Siemens.
Lieske Part No.: 1316551

Cover, with lightning arrow, horizontal and vertical, terminal width: 6.2 mm, yellow, 35 mm2 Terminal block connection technology for various industrial applications and modern building installations from Siemens. Regardless of whether you choose screw, tension spring, push-in or quick connection: All connection technologies can be freely combined with one another. The labeling and test accessories are standardized and can be used across the board. With the terminal blocks from SIEMENS, many applications in industrial, commercial and residential construction can be realized. This means you have the right connection technology for every connection. The Siemens terminal blocks are characterized above all by: 1. Permanently secure contact. 2. Easily detachable connection of electrical connections such as cables and lines. 3. Realization of a wide range of applications. 4. Convenient and simple assembly and connection technology. 5. Extensive and standardized accessories. 6. Reliable safety during installation thanks to standard touch protection. 7. Optimum technology for your safety - only from Siemens.
Lieske Part No.: 1581892

Cover, with lightning arrow, horizontal and vertical, terminal width: 6.2 mm, yellow, 70 mm2 Terminal block connection technology for various industrial applications and modern building installations from Siemens. Regardless of whether you choose screw, tension spring, push-in or quick connection: All connection technologies can be freely combined with one another. The labeling and test accessories are standardized and can be used across the board. With the terminal blocks from SIEMENS, many applications in industrial, commercial and residential construction can be realized. This means you have the right connection technology for every connection. The Siemens terminal blocks are characterized above all by: 1. Permanently secure contact. 2. Easily detachable connection of electrical connections such as cables and lines. 3. Realization of a wide range of applications. 4. Convenient and simple assembly and connection technology. 5. Extensive and standardized accessories. 6. Reliable safety during installation thanks to standard touch protection. 7. Optimum technology for your safety - only from Siemens.
Lieske Part No.: 662085