Terminals in Connection technology

Mini feed-through terminal block, with integrated diode, Connection type: Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Nominal current: 24 A, Nominal voltage: 500 V, Length: 62 mm, Width: 5.2 mm, Color: gray, Assembly: NS 15, NS 35/7,5, NS 35/15
Sales unit: 50 pieces
Lieske Part No.: 674221

Mini feed-through terminal block, with integrated diode, Connection type: Screw connection, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Nominal current: 24 A, Nominal voltage: 500 V, Length: 62 mm, Width: 5.2 mm, Color: gray, Assembly: NS 15, NS 35/7,5, NS 35/15
Sales unit: 50 pieces
Lieske Part No.: 587409

Mini feed-through terminal block, With equipotential bonder, Cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, Connection type: Screw connection, Width: 5.2 mm, Color: gray, Mounting type: NS 15, NS 35/7,5, NS 35/15
Sales unit: 50 pieces
Lieske Part No.: 629596

Controller for power supply and multi-stage, floating remote signaling of connected surge protection modules.
Lieske Part No.: 162494

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential.
Lieske Part No.: 162815

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Lieske Part No.: 162338

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Lieske Part No.: 162339

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Lieske Part No.: 162350

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.
Lieske Part No.: 162351

Electronic device circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
Lieske Part No.: 553367

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162266

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162270

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162273

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162276

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162277

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit.
Lieske Part No.: 162790

Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector plug/socket
Lieske Part No.: 163446

Component connector, to connect 2-pos. components to the basic terminal block, to be secured with screw-type clamping units, 19 mm high, max. 16 A
Sales unit: 10 pieces
Lieske Part No.: 204093

Component plug, with universal diode, to connect 2-pos. components into the basic terminal block, height: 19 mm, color: Gray
Sales unit: 10 pieces
Lieske Part No.: 525702

Component connector, Pitch: 6 mm, Number of positions: 1, Color: gray
Sales unit: 10 pieces
Lieske Part No.: 545963

Component connector, Pitch: 6 mm, Number of positions: 1, Color: gray
Sales unit: 10 pieces
Lieske Part No.: 433559

Combination of type 2 surge protection and arrester backup fuse, with arrester monitoring, in combination with a status indicator and remote indication contact. Design: 5-conductor system (L1, L2, L3, N, PE), mounting on 60 mm system technology (power rail system)
Lieske Part No.: 133576

BNC connector, double-deck, for mounting on NS 32 or NS 35/7.5, wave resistance: 50 O
Sales unit: 10 pieces
Lieske Part No.: 610396

BNC connector, 2-pos., double-level, for mounting on NS 32 or NS 35/7,5, wave impedance: 75 Ω
Sales unit: 10 pieces
Lieske Part No.: 370147

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 18 mm, Lettering field: 18 x 5 mm
Sales unit: 10 pieces
Lieske Part No.: 101700

Wire bridge, Color: gray
Lieske Part No.: 142438

PCB header, nominal cross section: 2.5 mm², color: light gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: tin, contact type: pin, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, article family: MSTBO 2.5/..-G1L, pitch: 5 mm, mounting: wave soldering, pin layout: linear pinning, pin length [P]: 3.5 mm, number of soldering pins per potential: 1, plug-in system: COMBICON MSTB 2.5, locking: without, packaging type: packed in a cardboard box, article with side pin outlet on the left
Sales unit: 50 pieces
Lieske Part No.: 603186

PCB header, nominal cross section: 2.5 mm², color: light gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: tin, contact type: pin, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product family: MSTBO 2.5/..-G1R, pitch: 5 mm, connection type: pluggable, mounting: wave soldering, pin layout: linear pinning, pin length [P]: 3.5 mm, number of soldering pins per potential: 1, plug-in system: COMBICON MSTB 2.5, locking: without, packaging type: packed in a cardboard box, product with side pin outlet on the right
Sales unit: 50 pieces
Lieske Part No.: 603206

Shield connection clip for printed circuit terminal block
Sales unit: 10 pieces
Lieske Part No.: 823083

Universal DIN rail adapter, for screwing on switchgear
Sales unit: 5 pieces
Lieske Part No.: 680638

Component housing with vents, Lower part, Cross connection: integrated bus connector, Color: green, Width: 22.5 mm, Constructional height: 114.5 mm, Number of positions cross connector: 10+2
Sales unit: 10 pieces
Lieske Part No.: 823230

Inline terminal for power distribution (GND), complete with accessories, (connector and labeling field) connections for GND
Lieske Part No.: 227278

Inline analog input terminal, complete with accessories (connector and labeling field), 8 channels, RTD (resistance temperature detector), 2, 3-wire connection method
Lieske Part No.: 483387

Inline, Digital input, Digital inputs: 4, 24 V DC, 3-conductor, Transmission speed in the local bus 500 kBit/s, Degree of protection IP20, including Inline connector and labeling field
Sales unit: 4 pieces
Lieske Part No.: 873829

Inline, Digital output, Digital outputs: 4, 24 V DC, 500 mA, 3-conductor, Transmission speed in the local bus 500 kBit/s, Degree of protection IP20, including Inline connector and labeling field
Sales unit: 4 pieces
Lieske Part No.: 418503

Inline analog output terminal, Inline ME variants (Machine Edition) complete with accessories (connector and labeling field), 2 outputs, 0 - 10 V, ±10 V, 2-conductor connection system
Lieske Part No.: 250436

MCR repeater power supply with HART transmission, input signal 4...20 mA, output signal 4...20 mA, with screw connection.
Lieske Part No.: 132607

Attachment plug with surge protection for mains sockets, optical power and fault display. For country-specific use in: D, A, I, NL, S, E, N, FIN
Lieske Part No.: 713728

Attachment connector with surge protection for mains sockets, mains control lamp, optical power and fault display. For country-specific use in: D, A, I, NL, S, N, FIN, E, P. Color: White
Lieske Part No.: 496491

PCB terminal, nominal current: 24 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of rows: 1, number of positions per row: 3, product family: MKDSO 2.5 HV/..-R, pitch: 7.5 mm, connection type: screw connection with tension sleeve, assembly: wave soldering, connection direction conductor/PCB: 0 °, color: light gray, pin layout: linear pinning, pin length [P]: 3.5 mm, number of soldering pins per potential: 1. Product with lateral pin outlet on the right
Sales unit: 50 pieces
Lieske Part No.: 466922

Installation component housing, Upper part, Color: light gray, Width: 17.8 mm, Constructional height: 62.2 mm
Sales unit: 10 pieces
Lieske Part No.: 132397

Installation component housing, Housing cover, Color: light gray, Width: 17.8 mm
Sales unit: 10 pieces
Lieske Part No.: 132278

Installation component housing with vents, Lower part, Cross connection: DIN rail bus connector, Color: black, Width: 17.8 mm, Constructional height: 49 mm, Number of positions cross connector: 16
Sales unit: 10 pieces
Lieske Part No.: 132406

Plug component, Nominal current: 3 A, Number of positions: 16, Pitch: 2.54 mm, Color: jet black
Sales unit: 10 pieces
Lieske Part No.: 132661

14 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V DC
Sales unit: 10 pieces
Lieske Part No.: 957521

14 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V AC/DC
Sales unit: 10 pieces
Lieske Part No.: 668261

VARIOFACE module for connecting a RJ45 socket with spring-cage double connection terminal blocks in direct plug-in method.
Lieske Part No.: 153712

3-phase loop bridge for 2 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 260308

3-phase loop bridge for 3 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 624510

3-phase loop bridge for 4 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 540144