Lightning protection material from Dehn + Soehne
You have been filtering for Dehn + Soehne and therefore you see now only Lightning protection material from Dehn + Soehne .
You can choose other manufacturers on the left side in the menu or get the complete overview.
Lightning protection material from Dehn + Soehne
 |
 Dehn + Soehne 275230 DEHN conductor holder m. Abdeckbund ,
Flat cable holder with slotted overlay and cover collar, for attaching flat cables, fixed cable routing. Version with internal thread, pre-assembled with screw and dowel.Lieske Part No.: 531021 Mfg Part No: 275230 |
7,03 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275239 Dehn LH ZS 23 H10 B6.5X16 V2A cable holder for HVI cable D: 23mm
Lieske Part No.: 1096196 Mfg Part No: 275239 |
9,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275242 Dehn LH ZS 27 B5.5X10 V2A cable holder for HVI power cable
Conductor holder for HVI power conductor, with two-screw clamp, stainless steel version, e.g. for wall mounting. Lieske Part No.: 2095550 Mfg Part No: 275242 Type: LH ZS 27 B5.5X10 V2A |
9,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275249 Dehn LH ZS 27 KS H10 V2A cable holder for HVI power cable 27-30
Conductor holder for HVI power conductor, with two-screw clamp, stainless steel version, e.g. for wall mounting. Lieske Part No.: 1326385 Mfg Part No: 275249 Type: LH ZS 27 KS H10 V2A |
10,89 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275250 Dehn LH ZS 20 23 GM8 V2A cable holder for HVI/CUI cables
Conductor holder for HVI conductor / CUI conductor, with two-screw clamp, NIRO version, e.g. for wall mounting. Lieske Part No.: 1336897 Mfg Part No: 275250 Type: LH ZS 20 23 GM8 V2A |
9,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275251 Dehn LH ZS 20 23 GM6 V2A cable holder for HVI/CUI cables
Conductor holder for HVI conductor / CUI conductor, with two-screw clamp, NIRO version, e.g. for wall mounting. Lieske Part No.: 2022104 Mfg Part No: 275251 Type: LH ZS 20 23 GM6 V2A |
9,60 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275252 Dehn LH ZS 20 23 B5.5X10 V2A cable holder HVI-/CUI-Ltg long 10x5.5mm stainless steel
Conductor holder for HVI conductor / CUI conductor, with two-screw clamp, NIRO version, e.g. for wall mounting. Lieske Part No.: 1336881 Mfg Part No: 275252 Type: LH ZS 20 23 B5.5X10 V2A |
8,61 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275259 Dehn LH ZS 20 23 KS H10 V2A cable holder for HVI/CUI cables
Conductor holder for HVI conductor / CUI conductor, with two-screw clamp, NIRO version with plastic base, e.g. for wall mounting. Lieske Part No.: 1336895 Mfg Part No: 275259 Type: LH ZS 20 23 KS H10 V2A |
10,20 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275260 DEHN rod holder
Rod holder with slotted overlay and cover collar, for attaching air-termination and earth entry rods Rd 16 mm, fixed cable routing. Pre-assembled version with screw and dowel. Lieske Part No.: 995661 Mfg Part No: 275260 |
6,83 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275319 Dehn LH ZS 20 23 SBH 25X0.3 V2A cable holder for HVI cable
Stainless steel cable holder for HVI cable, for fastening to pipes or antenna masts, e.g. with pipe clamp (item no. 106 323). Lieske Part No.: 2022106 Mfg Part No: 275319 Type: LH ZS 20 23 SBH 25X0.3 V2A |
14,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275320 Dehn line holder D = 20 mm for HVI conductor ZG-NIRO D = 20mm
Cable holder with tensioning strap, for fastening the HVI cable (black) or HVI cable light, e.g. to pipes. Version with metal cable holder. Lieske Part No.: 186836 Mfg Part No: 275320 |
27,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275330 DEHN 275 330 Conductor Holder f. HVI INTR, 20mm m. Spannbandbef. D 50-300mm 275,330
Cable holder with tensioning strap, for fastening the HVI cable (black) or HVI cable light, e.g. to pipes. Version with plastic cable holder. Lieske Part No.: 927035 Mfg Part No: 275330 |
24,55 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275333 Dehn LH ZS 23 SB50.300 PA V2A cable holder for HVI cable
Cable holder with tensioning strap, for fastening the HVI cable (grey) e.g. to pipes. Version with plastic cable holder. Lieske Part No.: 1583448 Mfg Part No: 275333 Type: LH ZS 23 SB50.300 PA V2A |
25,15 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275339 Dehn LH ZS 27 SB50.300 V2A Leitungshalter f.HVI-Leitung 27- 30mm
Leitungshalter aus NIRO für HVI power Leitung, zur Befestigung z. B. an Rohren oder Antennenmasten. Verkaufseinheit: 1 ST. Lieske Part No.: 2144476 Mfg Part No: 275339 Type: LH ZS 27 SB50.300 V2A |
28,41 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275441 DEHN LH ZS 20 EX W200 BP V2A HVI Ex W200, AS 200mm m. Mounting bar 275 441
Cable holder for laying the HVI cable in potentially explosive areas of Ex Zone 1 (gases, vapors, mists) and Ex Zone 21 (dusts). The special installation conditions ensure that an electrical spark to ... Lieske Part No.: 348395 Mfg Part No: 275441 Type: LH ZS 20 EX W200 BP V2A |
604,89 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275444 Dehn LH ZS 20 EX P70 SBB V2A HVI-Ex P70 holder NIRO for cable
Cable holder for fastening to pipes, e.g. with pipe clamp for laying the HVI cable in potentially explosive areas of Ex Zone 1 (gases, vapors, mists) and Ex Zone 21 (dust). The special installation ... Lieske Part No.: 2105016 Mfg Part No: 275444 Type: LH ZS 20 EX P70 SBB V2A |
40,59 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Dehn + Soehne 275716 Dehn LHZS16SBBPAV2A Stangenhalter f.Rd 16mm f.Spannb. 14x0,3mm
Kunststoff-Leitungshalter zum isolierten Befestigen von Erdeinführungen an metallenen Regenfallrohren. Damit ist ein Messen ohne Demontieren möglich. Ausführung für Erdeinführungsstangen, feste ... Lieske Part No.: 2144188 Mfg Part No: 275716 Type: LH ZS 16 SBB PA V2A |
7,13 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 275730 Dehn LH ZS 6.11 FL30 SBB PA V2A holder made of PA for FL 30mm Rd 6-11mm
Lieske Part No.: 904825 Mfg Part No: 275730 Type: LH ZS 6.11 FL30 SBB PA V2A |
6,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 276016 Dehn cover K-gray H 10mm D 35mm f line and rod holders
Plastic base as intermediate element for snap-on conductor holders (DEHNgrip) and rod holders (DEHNhold). Made of plastic, UV-stabilized. Lieske Part No.: 743680 Mfg Part No: 276016 |
0,89 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 277130 Dehn LH 6.13 FL30 B10 K GR cable holder K-gray for Rd 6-13/Fl 30mm
Cable holder for laying round and flat cables for potential equalization, e.g. in transformer stations, computer rooms. Made of plastic, insulated, UV-stabilized and with M6 screws. Lieske Part No.: 1231620 Mfg Part No: 277130 Type: LH 6.13 FL30 B10 K GR |
4,46 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 277230 Our concern ribbon holder with haws ,
Flat cable holder with pressure piece (M8 screw), for laying flat cable up to 11 mm and round cables 6-10 mm, fixed cable routing. Version with wall clearance 11 mm. Lieske Part No.: 155049 Mfg Part No: 277230 |
7,72 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 277237 Our concern ribbon holder with haws ,
Flat cable holder with pressure piece (M8 screw), for laying flat cable up to 11 mm and round cables 6-10 mm, fixed cable routing. Version with wall clearance 11 mm. Lieske Part No.: 622937 Mfg Part No: 277237 |
17,13 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 277239 Our concern ribbon holder with haws ,
Flat cable holder with pressure piece (M8 screw), for laying flat cable up to 11 mm and round cables 6-10 mm, fixed cable routing. Version with wall clearance 11 mm. Lieske Part No.: 791490 Mfg Part No: 277239 |
13,56 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Dehn + Soehne 277240 DEHN ribbon holder St / tZn , heavy duty
Flat cable holder with pressure piece (M8 screw), for laying flat cable up to 11 mm and round cables 6-10 mm, fixed cable routing. Version with wall clearance 15 mm. Lieske Part No.: 559547 Mfg Part No: 277240 |
9,90 EUR
plus delivery charges
Delivery time on requestinfo_outline
|