Rubber bushings / grommets in Conduits / Cable Glands

Locknut SKINDICHT® SM-PE-M 63X1.5 LOCKNUT, locknut, M 63, wrench size: 70mm, nickel-plated brass, Areas of application: Withstands high chemical and mechanical stress,Suitable for outdoor use,For use on the inside of painted, anodized or powder-coated housings,Can be used with metric SKINTOP® and SKINDICHT® cable glands for applications where electromagnetic compatibility (EMC) is required, Benefits: Withstands temperatures up to +200 °C,The contact is achieved when the locknut is tightened by the cutting edges that scratch the coated layer of the housing,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Optimal contacting of a coated Housing for protection against electromagnetic interference and for potential equalization
Sales unit: 10 pieces
Lieske Part No.: 228950

Locknut SKINDICHT® SM-PE-M 90X2 LOCKNUT, locknut, M 90, wrench size: 102mm, nickel-plated brass, Areas of application: Withstands high chemical and mechanical stress,Suitable for outdoor use,For use on the inside of painted, anodized or powder-coated housings,Can be used with metric SKINTOP® and SKINDICHT® cable glands for applications where electromagnetic compatibility (EMC) is required, Benefits: Withstands temperatures up to +200 °C,Contact is made when the locknut is tightened by the cutting edges that scratch the coated layer of the housing,Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive,Optimal contacting of a coated housing for protection against electromagnetic interference and for potential equalization
Lieske Part No.: 903654

Blind plug SKINDICHT® BL-M heX. 12X1.5 +O-RING, Blind plug, Thread size: M 12, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be sealed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 439348

Blind plug SKINDICHT® BL-M heX. 16X1.5 +O-RING, Blind plug, Thread size: M 16, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be sealed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 439349

Blind plug SKINDICHT® BL-M heX. 20X1.5 +O-RING, Blind plug, Thread size: M 20, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be sealed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 439354

Blind plug SKINDICHT® BL-M heX. 25X1.5 +O-RING, Blind plug, Thread size: M 25, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be sealed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 439356

Blind plug SKINDICHT® BL-M heX. 32X1.5 +O-RING, Blind plug, Thread size: M 32, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be sealed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 25 pieces
Lieske Part No.: 439397

Blind plug SKINDICHT® BL-M heX. 40X1.5 +O-RING, Blind plug, Thread size: M 40, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be sealed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 25 pieces
Lieske Part No.: 439403

Blind plug SKINDICHT® BL-M heX. 50X1.5 +O-RING, Blind plug, Thread size: M 50, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be sealed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 10 pieces
Lieske Part No.: 439408

Blind plug SKINDICHT® BL-M heX. 63X1.5 +O-RING, Blind plug, Thread size: M 63, Nickel-plated brass, Halogen-free, UV-resistant, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For closing an unused metric threaded hole on the housing, Benefits: Mounted O-ring enables the threaded/through hole to be closed liquid-tight and thus a higher protection class (up to IP 68), Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Withstands temperatures up to +100 °C, Easy to install using an open-end wrench
Sales unit: 10 pieces
Lieske Part No.: 439411

Locknut SKINDICHT® SM NPT 3/10,2 cm ( 4 inch ), Locknut, NPT 3/4', Wrench size: 32mm, Nickel-plated brass, Areas of application: Wherever a screw connection must be locked, or thin-walled housing walls only allow through holes, Benefits:
Sales unit: 20 pieces
Lieske Part No.: 1592586

Adapter SKINDICHT® ZSE-M 20X1.5/21, adapter, internal thread: PG 21, external thread: M 20, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 1232172

Adapter SKINDICHT® MA-M/PG 16X1.5/7, adapter, internal thread: PG 7, external thread: M 16, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain any lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 100 pieces
Lieske Part No.: 820759

Adapter SKINDICHT® MA-M/PG 20X1.5/9, adapter, internal thread: PG 9, external thread: M 20, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 50 pieces
Lieske Part No.: 203901

Adapter SKINDICHT® MA-M/PG 25X1.5/11, adapter, internal thread: PG 11, external thread: M 25, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 50 pieces
Lieske Part No.: 113896

Adapter SKINDICHT® MA-M/PG 25X1.5/13.5, adapter, internal thread: PG 13.5, external thread: M 25, nickel-plated brass, Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For applications in which different thread types are used, Benefits: Withstands temperatures up to +200 °C, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Enables easy transition from a metric external thread to a PG internal thread, Available for thread sizes up to PG42 or up to M63
Sales unit: 50 pieces
Lieske Part No.: 893882

Adapter SKINDICHT® MA-M/PG 25X1.5/16, adapter, internal thread: PG 16, external thread: M 25, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 50 pieces
Lieske Part No.: 304111

Adapter SKINDICHT® MA-M/PG 32X1.5/16, adapter, internal thread: PG 16, external thread: M 32, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 25 pieces
Lieske Part No.: 424414

Adapter SKINDICHT® MA-M/PG 32X1.5/21, adapter, internal thread: PG 21, external thread: M 32, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 25 pieces
Lieske Part No.: 518233

Adapter SKINDICHT® MA-M/PG 40X1.5/21, adapter, internal thread: PG 21, external thread: M 40, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 25 pieces
Lieske Part No.: 433066

Adapter SKINDICHT® MA-M/PG 50X1.5/29, adapter, internal thread: PG 29, external thread: M 50, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 10 pieces
Lieske Part No.: 802214

Adapter SKINDICHT® MA-M/PG 63X1.5/36, adapter, internal thread: PG 36, external thread: M 63, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain any lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 10 pieces
Lieske Part No.: 326097

Adapter SKINDICHT® MA-M/PG 63X1.5/42, adapter, internal thread: PG 42, external thread: M 63, nickel-plated brass, areas of application: withstands high chemical and mechanical stress, suitable for outdoor use, for applications in which different thread types are used, benefits: withstands temperatures up to +200 °C, article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain any lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, enables easy transition from a metric external thread to a PG internal thread, available for thread sizes up to PG42 or up to M63
Sales unit: 10 pieces
Lieske Part No.: 1232479

Reduction SKINDICHT® MR-M 16X1.5/12X1.5, reduction, internal thread: M 12, external thread: M 16, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 445330

Reduction SKINDICHT® MR-M 20X1.5/12X1.5, reduction, internal thread: M 12, external thread: M 20, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 159716

Reduction SKINDICHT® MR-M 20X1.5/16X1.5, reduction, internal thread: M 16, external thread: M 20, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 101211

Reduction SKINDICHT® MR-M 25X1.5/16X1.5, reduction, internal thread: M 16, external thread: M 25, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 710251

Reduction SKINDICHT® MR-M 25X1.5/20X1.5, reduction, internal thread: M 20, external thread: M 25, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 520043

Reduction SKINDICHT® MR-M 32X1.5/20X1.5, reduction, internal thread: M 20, external thread: M 32, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 367462

Reduction SKINDICHT® MR-M 32X1.5/25X1.5, reduction, internal thread: M 25, external thread: M 32, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 432323

Reduction SKINDICHT® MR-M 40X1.5/25X1.5, reduction, internal thread: M 25, external thread: M 40, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Sales unit: 25 pieces
Lieske Part No.: 937714

Reduction SKINDICHT® MR-M 40X1.5/32X1.5, reduction, internal thread: M 32, external thread: M 40, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 103889

Reduction SKINDICHT® MR-M 50X1.5/32X1.5, reduction, internal thread: M 32, external thread: M 50, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 445442

Reduction SKINDICHT® MR-M 50X1.5/40X1.5, reduction, internal thread: M 40, external thread: M 50, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 428241

Reduction SKINDICHT® MR-M 63X1.5/40X1.5, reduction, internal thread: M 40, external thread: M 63, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 142901

Reduction SKINDICHT® MR-M 63X1.5/50X1.5, reduction, internal thread: M 50, external thread: M 63, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is smaller than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 625535

Adapter SKINDICHT® ZS-M 16X1.5/9, adapter, internal thread: PG 9, external thread: M 16, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 100 pieces
Lieske Part No.: 896422

Adapter SKINDICHT® ZS-M 20X1.5/11, adapter, internal thread: PG 11, external thread: M 20, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 100 pieces
Lieske Part No.: 140546

Adapter SKINDICHT® ZS-M 20X1.5/13.5, adapter, internal thread: PG 13.5, external thread: M 20, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 100 pieces
Lieske Part No.: 875877

Adapter SKINDICHT® ZS-M-XL 20X1.5/13.5, adapter, internal thread: PG 13.5, external thread: M 20, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 100 pieces
Lieske Part No.: 440569

Adapter SKINDICHT® ZS-M 20X1.5/16, adapter, internal thread: PG 16, external thread: M 20, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 281403

Adapter SKINDICHT® ZS-M 25X1.5/21, adapter, internal thread: PG 21, external thread: M 25, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 50 pieces
Lieske Part No.: 426643

Adapter SKINDICHT® ZS-M 32X1.5/29, adapter, internal thread: PG 29, external thread: M 32, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Lieske Part No.: 724990

Adapter SKINDICHT® ZS-M-XL 32X1.5/29, adapter, internal thread: PG 29, external thread: M 32, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 25 pieces
Lieske Part No.: 1230622

Adapter SKINDICHT® ZS-M 40X1.5/36, adapter, internal thread: PG 36, external thread: M 40, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 10 pieces
Lieske Part No.: 315244

Adapter SKINDICHT® ZS-M-XL 40X1.5/36, adapter, internal thread: PG 36, external thread: M 40, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 10 pieces
Lieske Part No.: 1230621

Adapter SKINDICHT® ZS-M 63X1.5/48, adapter, internal thread: PG 48, external thread: M 63, nickel-plated brass, areas of application: hexagonal intermediate socket from a metric external thread to a PG internal thread, housing, devices, machines, benefits: enables the use of PG accessories in metric threaded holes, assembly with open-end wrench
Sales unit: 10 pieces
Lieske Part No.: 1232169

SKINDICHT® ME-M 12X1.5/16X1.5 extension, extension, internal thread: M 16, external thread: M 12, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is larger than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Sales unit: 100 pieces
Lieske Part No.: 960105

Extension SKINDICHT® ME-M 16X1.5/20X1.5, extension, internal thread: M 20, external thread: M 16, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is larger than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Sales unit: 100 pieces
Lieske Part No.: 864535

SKINDICHT® ME-M 20X1.5/25X1.5 extension, extension, internal thread: M 25, external thread: M 20, nickel-plated brass, , Areas of application: Withstands high chemical and mechanical stress, Suitable for outdoor use, For use with a metric cable gland whose connection thread is larger than the existing threaded hole, Benefits: Provides flexibility when selecting a cable gland, as the selection is independent of the threaded hole of the housing, Article numbers ending in 'LF' are lead-free product alternatives with otherwise identical product properties. 'Lead-free' articles do not contain lead, which is currently permitted to make up up to four percent in copper alloys, but could be banned in the future according to the RoHS directive, Corrects the size difference between the connection thread of a cable gland and the threaded hole in a housing
Lieske Part No.: 364319