Screw-Driver-Bits
Screw-Driver-Bits from Cimco
|
Cimco 114508 single bit standard PH1 L90mm n.DIN3128
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 371360 Mfg Part No: 114508 |
-16% 5,53 EUR 6,61 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Standard Cimco 114509, BIT PH 2 x 90 mm BITflex
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 883947 Mfg Part No: 114509 |
-16% 5,53 EUR 6,61 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114510 single bit Standard PH3, L90mm n.DIN3128
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 335201 Mfg Part No: 114510 |
5,53 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114511 Bitflex-bit PH1x25,
Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.Lieske Part No.: 743937 Mfg Part No: 114511 |
-16% 3,11 EUR 3,71 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114512 Cross Eimzelbit standard , PHILLIPS SIZE 2
Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.Lieske Part No.: 148380 Mfg Part No: 114512 |
-16% 3,11 EUR 3,71 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114513 Bitflex-bit PH3x25,
Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.Lieske Part No.: 581208 Mfg Part No: 114513 |
-16% 3,11 EUR 3,71 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114516 single bit 25mm , for Phillips screws Pozidriv PZ2
Bitflex bits, the damping zone (only for bits with a length of 25 mm) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces.Lieske Part No.: 822262 Mfg Part No: 114516 |
-16% 3,11 EUR 3,71 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114518 standard BIT PZ 1 x 90 mm , BITflex
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 513938 Mfg Part No: 114518 |
-16% 5,53 EUR 6,61 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114519 single bit standard PZ2 L90mm n.DIN3128
Bitflex bits: the dampening zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 448176 Mfg Part No: 114519 |
-16% 5,53 EUR 6,61 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114520 single bit standard PZ3 L90mm n.DIN3128
Bitflex bits: the dampening zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 423350 Mfg Part No: 114520 |
-16% 5,53 EUR 6,61 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Standard Cimco 114573, BIT D 10 x 90 mm BITflex
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 796565 Mfg Part No: 114573 |
-13% 8,02 EUR 9,23 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114574 bits Torx T 15 , 90 mm length
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 118830 Mfg Part No: 114574 |
-13% 8,02 EUR 9,23 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114575 standard T bit , 20 x 90 mm BITflex
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 895075 Mfg Part No: 114575 |
-13% 8,02 EUR 9,23 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114576 Standard Bit TORX T25x90mm for TORX screws with Bitflex bore
Bitflex bits: the damping zone (only for 25 mm long bits) between the drive and the working tip absorbs excess force peaks that previously led to high wear and destructive ejection forces. The FLEX ...Lieske Part No.: 360080 Mfg Part No: 114576 |
-13% 8,02 EUR 9,23 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114599 BIT set of special 33-part ,
Special Bit SetBit set to delete security screws. Content 1 of each magnet holder 60 mm for 1/10,2 cm ( 4 inch )-Bitantrieb, bits TORX (R) with hole (tamper resistant) T8 - T10 - T15 - T20 - T25 ... Lieske Part No.: 177484 Mfg Part No: 114599 |
45,30 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Cimco 114602 Bit Set 21-Piece ,
Bit set ELECTRO TOP21-piece set consisting of 1 universal holder with permanent magnet, length 60 mm, each two piece bits Phillips Philips PH 1, PH 2, PH 3, Phillips Pozidriv PZ 1, PZ 2, PZ 3, TORX ... Lieske Part No.: 637923 Mfg Part No: 114602 |
45,13 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Cimco 114606 security BIT SET, ,
Special bit set 75 mm, 50 pieces, for working on all types of screws, especially security and special screws, thanks to the extra length of 75 mm, also ideal for hard-to-reach places in confined ...Lieske Part No.: 722412 Mfg Part No: 114606 |
41,46 EUR
![]() plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Cimco 114941 module bits 70 mm PZ 1,
Module bit for combined slotted and Phillips screws on electrical systems, e.g. terminal blocks, PZ FL1, dimensions: 70 mm. The damping zone (only for bits with a length of 25 mm) between the drive ...Lieske Part No.: 727397 Mfg Part No: 114941 |
-16% 5,80 EUR 6,93 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 114942 Single Bit PZ270 Combined Slotted/Phillips Screws
Module bit for combined slotted/Phillips screws on electrical systems, e.g. terminal blocks, PZ FL2, dimensions: 70 mm. The damping zone (only for bits with a length of 25 mm) between the drive and ...Lieske Part No.: 652680 Mfg Part No: 114942 |
-16% 5,80 EUR 6,93 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 201984 HSS Countersink 10.4 M5 ,
Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 10.4 mm, for M: 5, length: 31 mm. PU: 1Lieske Part No.: 507298 Mfg Part No: 201984 |
-6% 22,44 EUR 23,94 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 201985 HSS Countersink 12.4 M6 ,
Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 12.4 mm, for M: 6, length: 31 mm. PU: 1Lieske Part No.: 303097 Mfg Part No: 201985 |
-6% 24,48 EUR 26,11 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 201986 HSS Countersink 16.5 M8 ,
Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 16.5 mm, for M: 8, length: 31 mm. PU: 1Lieske Part No.: 870717 Mfg Part No: 201986 |
-6% 27,98 EUR 29,84 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 201987 HSS Countersink 20.5 M10 ,
Countersink bit 90° made of HSS, 3 cutting edges, axially and radially relief ground, shaft 1/4 'according to DIN 3126. Design: Ø: 20.5 mm, for M: 10, length: 31 mm. PU: 1Lieske Part No.: 240301 Mfg Part No: 201987 |
31,84 EUR 32,05 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
|
Cimco 201989 from 6.3 to 20.5 HSS Countersink Set, metal cassette
Countersunk bit 90° assortment, 6-piece, in a sheet steel cassette. Design: 1 countersunk bit each 6.3-20.5 mm in Ø, pack of 1Lieske Part No.: 320902 Mfg Part No: 201989 |
177,14 EUR
![]() plus delivery charges
Delivery time on requestinfo_outline
|
1 2


























