Miscellaneous from Klauke
You have been filtering for Klauke and therefore you see now only Miscellaneous from Klauke .
You can choose other manufacturers on the left side in the menu or get the complete overview.
Miscellaneous from KLAUKE
 |
 KLAUKE 25A13 Adapter Fuer Pk252 Fuer Hk13-Einsaetze
Adapter für Presskopf PK252 um Presseinsätze der Serie 13 nutzen zu können Verkaufseinheit: 1 ST.Lieske Part No.: 831459 Mfg Part No: 25A13 |
777,74 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50000420 lag screw 9.5 x 40 mm, 51.00042 million for manual operation
High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length. Tolerance deviations are reserved. Lieske Part No.: 224155 Mfg Part No: 50000420 |
-5% 19,70 EUR 20,75 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50024086 sheet metal punch ball bearing 12.7mm standard Knockout PG7
Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1427190 Mfg Part No: 50024086 |
43,96 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50024337 puncher ball bearings, 14,3mm Standard Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (St37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 814909 Mfg Part No: 50024337 |
44,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50024434 standard matrix 50,024,434 70.6 mm, sheet metal punch for standard systems
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 890480 Mfg Part No: 50024434 |
111,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50031708 threaded bushing 28,6 x 76 mm 03170, hydraulic actuation
Accessories for standard sheet metal punch systems. For 19mm draw bolts to 28.6mm Lieske Part No.: 854848 Mfg Part No: 50031708 |
80,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040111 die 50,040,111 34.6 mm, Slug-Buster
For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 573596 Mfg Part No: 50040111 |
-5% 28,41 EUR 29,94 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50040138 Slug-Buster die 43.2mm max. steel 3mm
For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 424803 Mfg Part No: 50040138 |
39,95 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50040405 tension screw 19x55mm with ball bearing
High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. Lieske Part No.: 460693 Mfg Part No: 50040405 |
33,07 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50040588 Standard Stamp 57.2mm Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1232228 Mfg Part No: 50040588 |
75,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50040596 standard die 57.2mm knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1232227 Mfg Part No: 50040596 |
67,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040618 die 50,040,618 49.6 mm, Slug-Buster for gap-punchers
For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 767441 Mfg Part No: 50040618 |
50,14 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50040634 die 50,040,634 61.5 mm, Slug-Buster for gap-punchers
For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 889610 Mfg Part No: 50040634 |
70,98 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041754 Standard stamp 74mm steel (ST37) 3mm
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1580578 Mfg Part No: 50041754 |
160,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041770 standard die 74mm steel (ST37) 3mm
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 1580577 Mfg Part No: 50041770 |
111,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50041878 ball bearing nut ,
Single part for manual operation of sheet metal punches. 19mm Lieske Part No.: 833719 Mfg Part No: 50041878 |
105,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50041886 lag screw 19,0 x140mm 50,041,886, with ball bearings for manual operation
High wear resistance. To increase service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. Lieske Part No.: 760343 Mfg Part No: 50041886 |
59,60 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 50042351 standard template 12.7mm, PG7 PG7 Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 816874 Mfg Part No: 50042351 |
15,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042459 Stamp 54.0mm Standard Knockout
Standard sheet metal punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter of 9.7mm ... Lieske Part No.: 280941 Mfg Part No: 50042459 |
66,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE 50042467 Standard Matrize 69,9mm Stahl(ST37) 3mm
Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ... Lieske Part No.: 492152 Mfg Part No: 50042467 |
104,45 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE 50042475 Standard Stempel 69,9mm Stahl(ST37) 3mm
Standard Blechlocher System. Geeignet für Stahlblech (ST37), Kunststoff und Aluminium. Blechlocher für manuelle und hydraulische Betätigung. Für die Verwendung des Zugbolzen 9,5mm muss das Loch ... Lieske Part No.: 492153 Mfg Part No: 50042475 |
128,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042483 Standard stamp 47,6mm, Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 472513 Mfg Part No: 50042483 |
60,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042491 standard template 47,6mm, Knockout
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 548487 Mfg Part No: 50042491 |
51,78 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 50042521 Standard stamp 66.7mm steel (ST37) 3mm
Standard sheet metal hole punch system. Suitable for sheet steel (ST37), plastic and aluminum. Sheet metal hole punch for manual and hydraulic operation. To use the 9.5mm draw bolt, the hole diameter ... Lieske Part No.: 373908 Mfg Part No: 50042521 |
128,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|