Miscellaneous from Klauke
You have been filtering for Klauke and therefore you see now only Miscellaneous from Klauke .
You can choose other manufacturers on the left side in the menu or get the complete overview.
Miscellaneous from KLAUKE
 |
 Klauke ESG85ES1 replacement knife movable 85 cutter Li-Io
Suitable for SSGG85 and ESSGG85-L. Inner knifeLieske Part No.: 1135002 Mfg Part No: ESG85ES1 |
416,77 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESGM452CFM Akkuhydraulisches Schneidwerkzeug ACSR bis 45mm Makita
Akkuhydraulisches Schneidwerkzeug bis 45mm zum Schneiden von Al/St-Leitungen (ACSR), Rundmaterialen (Cu, Al, Stahl) sowie armierten Leitungen und Bewehrungsstahl bis 14mm, Integriertes ... Lieske Part No.: 1301806 Mfg Part No: ESGM452CFM |
4.463,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESGM45CFB cable cutter battery-hydr. Mini 45mmD Bosch 2Ah
For cutting Al/St ropes (ACSR), round materials (Cu, Al, St) as well as armored cables, solid structural steel, as well as fine-stranded copper cables Excellent cutting properties for highly flexible ... Lieske Part No.: 628232 Mfg Part No: ESGM45CFB |
4.132,08 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESGM45CFM cable cutter battery-hydr. Mini 45mmD Makita 1.5Ah
High cutting power for cutting copper and aluminum cables with reinforcement as well as Al/St cables (ACSR). Also suitable for round material made of Al, Cu and steel. Extremely robust design with low ... Lieske Part No.: 1347142 Mfg Part No: ESGM45CFM |
4.132,08 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESM25CFB battery-powered hydraulic cutting tool next gen. Bosch battery D=25mm
ESM 25 Battery-operated hydraulic cutting tool Ø 25 mm, for cutting Al/St cables (ACSR), round materials (Cu, Al) as well as armored cables, as well as guy wires (stay wire), protected cutting ... Lieske Part No.: 1598540 Mfg Part No: ESM25CFB |
2.897,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESM25CFM battery-powered hydraulic cutting tool next gen. Bosch battery D=25mm
ESM 25 Battery-operated hydraulic cutting tool Ø 25 mm, for cutting Al/St cables (ACSR), round materials (Cu, Al) as well as armored cables, as well as guy wires (stay wire), protected cutting ... Lieske Part No.: 1598539 Mfg Part No: ESM25CFM |
2.897,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESM25ISM VDE cordless hydraulic cutting tool D=25mm 1000V
VDE battery-operated hydraulic cutting tool, housing in signal orange for easy differentiation from standard tools, insulated and VDE-certified up to 1000 V for increased safety when working on ... Lieske Part No.: 1598543 Mfg Part No: ESM25ISM |
3.163,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESM35CFB battery-powered hydraulic cutting tool next gen. Bosch battery D=35mm
ESM 35 Cordless hydraulic cutting tool Ø 35 mm for copper and aluminum cables, protected cutting mechanism, cutting of copper and aluminum cables, all cable classes 1, 2, 5 and 6, all tool data at a ... Lieske Part No.: 1598523 Mfg Part No: ESM35CFB |
2.319,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESM35CFM cordless hydraulic cutting tool Makita battery D=35mm
ESM 35 Cordless hydraulic cutting tool Ø 35 mm for copper and aluminum cables, protected cutting mechanism, cutting of copper and aluminum cables, all cable classes 1, 2, 5 and 6, all tool data at a ... Lieske Part No.: 1598537 Mfg Part No: ESM35CFM |
2.319,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE ESM35ISB Vde-Akkuhydraulisches Schneidwerkzeug Bos
VDE-Akkuhydraulisches Schneidwerkzeug Ø 35 mm für Kupfer- und Aluminiumkabel, geschützte Schneidmechanik, Schneiden von Kupfer- und Aluminium-Kabeln, alle Kabelklassen 1, 2, 5 und 6. Isoliert nach ... Lieske Part No.: 831476 Mfg Part No: ESM35ISB |
2.545,56 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESM35ISM VDE cordless hydraulic cutting tool D=35mm 1000V
VDE battery-operated hydraulic cutting tool, housing in signal orange for easy differentiation from standard tools, insulated and VDE-certified up to 1000 V for increased safety when working on ... Lieske Part No.: 1598542 Mfg Part No: ESM35ISM |
2.545,56 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE ESM50ISB Vde-Akkuhydraulisches Schneidwerkzeug Bos
VDE-Akkuhydraulisches Schneidwerkzeug Ø 50 mm für Kupfer- und Aluminiumkabel (auch feindrähtig). Isoliert nach IEC 60900 bis 1000 V. Sehr hohe Schneidkapazität dank innovativer Schneidengeometrie. Lieske Part No.: 831478 Mfg Part No: ESM50ISB |
3.008,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESM50ISM VDE cordless hydraulic cutting tool D=50mm 1000V
VDE battery-operated hydraulic cutting tool Ø 50 mm for copper and aluminum cables (also fine-stranded). Very high cutting capacity thanks to innovative cutting geometry. All tool data at a glance ... Lieske Part No.: 1598541 Mfg Part No: ESM50ISM |
3.008,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESSG105L safety cutter, battery 18V LI-LION max.D105mm
BG-tested safety cutting device for cutting Cu/Al cables without steel reinforcement that are live in the event of a fault with a nominal voltage of up to 60 kV. Single-core cables without steel ... Lieske Part No.: 158288 Mfg Part No: ESSG105L |
6.928,20 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke ESSGG85L safety cutter, battery 18V LI-ION max.D85mm
BG-tested safety cutting device for cutting Cu/Al cables without steel reinforcement that are live in the event of a fault with a nominal voltage of up to 60 kV. Single-core cables without steel ... Lieske Part No.: 158287 Mfg Part No: ESSGG85L |
6.646,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE FTA1 Fußschalter f.elektrohydraulische Pumpe EHP2-4 u.HK12/2EL
Anschlusskabel 10 m.Für Pumpen: EHP 2, EHP 3, EHP 4, HK 12/2 EL . Verkaufseinheit: 1 ST. Lieske Part No.: 492132 Mfg Part No: FTA1 |
501,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE FTA4 footswitch f.akkuhydraulische, pump AHP700-L
Connection cable 5 m. For pump AHP 700-L. Lieske Part No.: 993421 Mfg Part No: FTA4 |
666,47 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke HA13/300 hexagonal press insert 300sqmm aluminum connector HA13300
HA 13/300, pressing insert. Suitable for compression cable lugs and connectors according to DIN - Al, compression cable lugs and connectors Al/Cu (aluminum side). Lieske Part No.: 1580562 Mfg Part No: HA13300 |
168,80 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Klauke HA13SET Presseinsatzset 10-300 mm² A22 im Kunststoffkoffer 11-teilig
Geeignet für Presskabelschuhe und Verbinder nach DIN - Al, Presskabelschuhe und Verbinder Al/Cu (Aluminiumseite). Presseinsatzset im Kunststoffkoffer, 10-teilig. Verkaufseinheit: 1 ST. Lieske Part No.: 1670828 Mfg Part No: HA13SET |
1.328,58 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke HA15400 press insert
Press insert. Pressing range 400 mm². Suitable for compression cable lugs and connectors according to DIN - Al, compression cable lugs and connectors Al/Cu (aluminum side). Lieske Part No.: 1586943 Mfg Part No: HA15400 |
315,27 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE HAES13120S Presseinsatz HK13er-Reihe f.Aderendhülsen
Geeignet für Aderendhülsen, Trapez-Sonderform für ausgedünnte feindrähtige Leiter. 120 mm², Serie 13 Verkaufseinheit: 1 ST. Lieske Part No.: 702510 Mfg Part No: HAES13120S |
234,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE HAES13150S Presseinsatz HK13er-Reihe f.Aderendhülsen
Geeignet für Aderendhülsen, Trapez-Sonderform für ausgedünnte feindrähtige Leiter. 150 mm², Serie 13 Verkaufseinheit: 1 ST. Lieske Part No.: 702511 Mfg Part No: HAES13150S |
234,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE HAES13185S Presseinsatz HK13er-Reihe f.Aderendhülsen
Geeignet für Aderendhülsen, Trapez-Sonderform für ausgedünnte feindrähtige Leiter. 185 mm², Serie 13 Verkaufseinheit: 1 ST. Lieske Part No.: 702512 Mfg Part No: HAES13185S |
234,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE HAES13240S Presseinsatz HK13er-Reihe f.Aderendhülsen
Geeignet für Aderendhülsen, Trapez-Sonderform für ausgedünnte feindrähtige Leiter. 240 mm², Serie 13 Verkaufseinheit: 1 ST. Lieske Part No.: 702513 Mfg Part No: HAES13240S |
234,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|