Schneider Electric A9A26915 Schneider auxiliary switch Of(Ös) for IC60/LI

This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC &, 24VDC to 220VDC. Open / Closed, auxiliary contact. Intended for installations in small commercial premises, buildings, critical infrastructure, healthcare, industry, data centers. This electrical accessory is compatible with Acti9 ranges such as iC60 double terminal block and iID double terminal block. The iOF is used for either the device short name or the compatibility code. Screw terminal connection on the top. The connection allows rigid copper cables. The cable cross section ranges from 1mm² to 4mm². The iOF is used for either the device short name or the compatibility code. It has a screw terminal connection on the top. The connection is suitable for rigid copper cables. The cable cross-section can be from 1mm² to 4mm². Screw terminal connection on the top allows a cable cross-section of 0.5mm² to 2.5mm² for flexible copper cables. Screw terminal connection on the top. The connection allows rigid copper cables. The cable cross-section 2 cables allows a cable cross-section of 2.5mm². It has a screw terminal connection on the top. The connection is flexible with ferrule copper cables (2 cables). The cable cross-section is 1.5mm². The rated insulation voltage (Ui) is up to 500 V. The rated impulse voltage (Uimp) is 4kV. The width in 9mm intervals is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The pollution degree is 3. The tropicalization degree is treatment 2. The connection tightening torque is 1N.m (below) for the screwdriver type PZ1. According to the IEC 60529 standard, the IP protection degree is IP20. The operating temperature ranges from -25°C to +70°C. The storage temperature ranges from -40°C to +85°C. This product complies with the EN/IEC 60947-5-1 and EN/IEC 60947-5-4 standards. This product is certified with LCIE, ASEFA, KEMA and ASTA marks.
Type: A9A26915