Helukabel 24543 HELU TOPFLEX®-EMV-UV-3 PLUS 2xSLCH-J 3x35+ 3G6 Black

Technical data:

Special motor connection cable for frequency converters in accordance with DIN VDE 0250
Temperature range when moving -5°C to +90°C when fixed -40°C to +90°C
Permissible operating temperature on the conductor +90°C
Nominal voltage U0/U 600/1000 V
Maximum permissible Operating voltage single-phase and three-phase current 700/1200 V DC operation 900/1800 V
Test voltage 4000 V
Insulation resistance min. 200 MOhm x km
Coupling resistance depending on conductor cross-section max. 250 Ohm/km
Minimum bending radius with free movement for external Ø: up to 12 mm: 10x cable Ø > 12-20 mm: 15x cable Ø > 20 mm: 20x cable Ø fixed for external Ø: up to 12 mm: 5x cable Ø > 12-20 mm: 7.5x cable Ø > 20 mm: 10x cable Ø
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Construction:
Bare copper wire, in accordance with DIN VDE 0295 class 5, fine-stranded, BS 6360 cl.5, IEC 60228 cl.5
Core insulation made of cross-linked polyethylene (VPE)
Core identification SW, BR, GR
Protective conductor GN-GE (divided into thirds)
3+3-core structure
Cores twisted concentrically in layers
1. Shielding with special aluminum foil 2. Shielding braid made of tinned copper wires, coverage approx. 85%
Outer jacket based on special polyolefin
Jacket color: black (RAL 9005) with meter marking
Properties:
halogen-free
Low operating capacitance
Low coupling resistance results in good electromagnetic compatibility
The optimal shielding enables interference-free operation of frequency converters
The 3 PLUS structure variant has a symmetrical 3-core structure that is even better in terms of EMC properties than the 4-core versions. The protective conductor divided into thirds is evenly stranded in the gussets. This enables a very concentric structure.
The minimum cross-section of 0.75 mm² complies with the requirements of DIN EN 60204 Part 1
This shielded motor connection cable with low operating capacity of the individual wires due to special VPE wire insulation and low shielding capacity enables a lower-loss power transmission compared to PE connection cables
The materials used in production are free of silicone and cadmium and free of substances that impair paint wetting
Tests
self-extinguishing and flame-retardant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (corresponds to DIN VDE 0472 Part 804 test type B)
Meets EMC requirements according to EN 55011 or DIN VDE 0875 Part 11
Notes:
Current carrying capacity for continuous operation up to 30°C ambient temperature. For different ambient temperatures, the conversion factors and the specifications in DIN VDE 0298 Part 4 apply.
Use:
As a connecting cable for medium mechanical stress with fixed installation and occasional free movement in dry, damp and wet rooms. They are also approved for installation outdoors and underground when installed in pipes. Installation in pipes is permitted if precautions are taken to ensure that no water can collect in the pipe. As a result of the permissible operating temperature on the conductor of +90°C, a higher current carrying capacity is permitted compared to PE-insulated motor connection cables. Used in the automotive industry, food industry, environmental technology, packaging industry, machine tools, handling equipment, for SIMOVERT drives in industry for pumps, fans, conveyor belts and air conditioning systems, etc. . Use in Ex areas. EMC = Electromagnetic Compatibility In order to comply with radio interference suppression in accordance with EN 55011, the shield must be contacted on both sides and over a large area.
Standard lengths: 500 m, 1000 m
Subject to technical changes.
Type: 24543