Underfloor ducts and accessories from Hager

You have been filtering for Hager and therefore you see now only Underfloor ducts and accessories from Hager .
You can choose other manufacturers on the left side in the menu or get the complete overview.

Underfloor ducts and accessories from HAGER

Hager BKZEA00 screed anchor plastic PA6 Screed anchor made of polyamide for screed-flush floor duct BK. Screed anchor for screed-flush installation ducts according to DIN EN 50085-1 and DIN EN 50085-2-2, as system accessories. Lieske Part No.: 1329791 Mfg Part No: BKZEA00

2,97 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZHP00 Retaining tab made of steel, m.Dämmlager Holding bracket with insulation bearing for fastening the BK floor duct to the slab. Holding bracket for additional requirements for screed-flush floor ducts, for fixing duct units to the slab floor, ... Lieske Part No.: 971869 Mfg Part No: BKZHP00

5,74 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZHZ10 staple pliers for stapling the foil formwork Stapling pliers for stapling the film formwork.Stapling pliers for stapling the film formwork. Lieske Part No.: 1768041 Mfg Part No: BKZHZ10

213,44 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZHZ12 staples 12mm for stapler BKZHZ10 Staples 12 mm for stapling pliers BKZHZ10. Staples 12 mm for stapling pliers BKZHZ10 for stapling the film formwork. Lieske Part No.: 1884378 Mfg Part No: BKZHZ12

52,17 EUR plus delivery charges Delivery time on requestinfo_outline

HAGER BKZKM80 locknut M8 on, Counter of N-pen Lock nut M8 for leveling pins in traverses for floor duct BK. Nut M8 for locking leveling pins in traverses, flat shape, hexagon nut without chamfer, as system accessory. Lieske Part No.: 956592 Mfg Part No: BKZKM80

0,88 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZKV090 duct connector as a 90° angle Duct connector as a 90° angle made of steel for screed-flush floor duct BK. Duct connector angled, for additional requirements, for connecting screed-flush floor duct units, including 2 screws, as ... Lieske Part No.: 1882553 Mfg Part No: BKZKV090

7,52 EUR plus delivery charges Delivery time on requestinfo_outline

HAGER BKZKV180 channel connector straight, 180 ° Steel Straight duct connector made of steel for screed-flush floor duct BK. Straight duct connector, for additional requirements, for connecting screed-flush floor duct units, including 2 screws, as system ... Lieske Part No.: 894208 Mfg Part No: BKZKV180

6,73 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZM203 sponge rubber strips 20x3mm, self-adhesive Foam rubber strip for absorbing expansion pressure, self-adhesive on the side profile for BK. Foam rubber strip for absorbing the expansion pressure acting on the floor duct flush with the screed when ... Lieske Part No.: 572512 Mfg Part No: BKZM203

22,37 EUR plus delivery charges Delivery time on requestinfo_outline

HAGER BKZN030 Nivelierschelle, z.Nivelierstiftaufnahme H = 45mm Leveling clamp for leveling pins for BK from channel height including insulation bearing 45mm. Leveling clamp 30 mm for additional requirements for screed-flush floor channels, for supporting and ... Lieske Part No.: 958767 Mfg Part No: BKZN030

9,70 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZN050 Nivelierschelle, z.Nivelierstiftaufnahme H = 65mm Leveling clamp for leveling pins for BK from duct height including insulation bearing 65mm. Leveling clamp 50 mm for additional requirements for screed-flush floor ducts, for supporting and connecting ... Lieske Part No.: 583386 Mfg Part No: BKZN050

10,00 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS100 leveling pin M8x100mm Leveling pin M8x100mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1565518 Mfg Part No: BKZNS100

2,43 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS120 leveling pin M8x120mm for mounting screed-flush flooring. Leveling pin M8x120mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1882554 Mfg Part No: BKZNS120

2,62 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS140 Nivelierstift M8x140, leveling height 140mm Leveling pin M8x140mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 936034 Mfg Part No: BKZNS140

3,76 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS160 Nivelierstift M8x160, leveling height 160mm Leveling pin M8x160mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 242289 Mfg Part No: BKZNS160

5,54 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS40 leveling pin M8x40 leveling height 40mm Leveling pin M8x40mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1329789 Mfg Part No: BKZNS40

0,67 EUR plus delivery charges Delivery time on requestinfo_outline

HAGER BKZNS45 Nivelierstift M8x45, leveling height 45mm Leveling pin M8x45mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 958931 Mfg Part No: BKZNS45

0,77 EUR plus delivery charges Delivery time on requestinfo_outline

HAGER BKZNS50 Nivelierstift M8x50, leveling height 50mm Leveling pin M8x50mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 958981 Mfg Part No: BKZNS50

0,88 EUR plus delivery charges Delivery time on requestinfo_outline

HAGER BKZNS60 Nivelierstift M8x60, leveling height 60mm Leveling pin M8x60mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 959561 Mfg Part No: BKZNS60

1,03 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS65 leveling pin M8x65mm for mounting screed-flush floors. Leveling pin M8x65mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1055591 Mfg Part No: BKZNS65

1,12 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS85 Nivelierstift M8x85, leveling height 85mm Leveling pin M8x85mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 195298 Mfg Part No: BKZNS85

1,96 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNS90 leveling pin M8x90mm Leveling pin M8x90mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1882555 Mfg Part No: BKZNS90

2,18 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZNSD0 Insulating bearing for holding M8 leveling pins in trusses Insulation bearing for holding M8 leveling pins in traverses for BK floor ducts. Insulation bearing for additional requirements for screed-flush floor ducts, for traverses with sleeve support screw, ... Lieske Part No.: 1882556 Mfg Part No: BKZNSD0

3,37 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZSA200 earth, z.Erdanschluss the BK Protective conductor for earth connection of the BK for screed-flush floors, length 200 mm, green-yellow. Protective conductor green-yellow, as connection lug 2.5 mm², length 200 mm, can be screwed ... Lieske Part No.: 941579 Mfg Part No: BKZSA200

9,80 EUR plus delivery charges Delivery time on requestinfo_outline

Hager BKZSAK00 protective conductor terminal f.BK Earthing terminal for screed-flush floor duct BK with sealing option. Earthing terminal for fastening in the inner profile groove of screed-flush floor ducts with sealing option in accordance with DIN ... Lieske Part No.: 207651 Mfg Part No: BKZSAK00

6,73 EUR plus delivery charges Delivery time on requestinfo_outline

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22