Cable duct accessories complete from Ggk
You have been filtering for Ggk and therefore you see now only Cable duct accessories complete from Ggk .
You can choose other manufacturers on the left side in the menu or get the complete overview.
Cable duct accessories complete from Ggk
 |
Ggk 1794 FB-FB Outer corner / AE60X200GR, 60x200mm GREY
Outside corner as hood molding for cable routing duct, for laying cables around wall projections. Lieske Part No.: 659696 Mfg Part No: 1794 Type: FB/AE60X200GR |
39,21 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 17987 Tail for wall duct, BR3-ES 60x130, 3-sided, 9001
End piece as a molded part for parapet ducts, for a clean finish and to cover open ends of the parapet ducts, spanning 3 sides for a parapet duct mounted on the wall. Lieske Part No.: 137327 Mfg Part No: 17987 Type: BR3-ES60x130 |
11,97 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 17996 Kabelbändiger tail ES 60x7, Kabelbändiger tail
End pieces for cable ties, attachable to the profile to cover the open sides on the left and right. Lieske Part No.: 397095 Mfg Part No: 17996 Type: KB-ES60x70 |
20,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 17997 OFFICE / Kabelbändiger-ES 60x70, 1 pair of end pieces
End pieces for cable ties, attachable to the profile to cover the open sides on the left and right. Lieske Part No.: 620283 Mfg Part No: 17997 Type: KB-ES60x70 |
20,25 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1802 CVD small distribution installation unit for 2 inserts CVD pure white 50/2
Small distribution installation unit KVE 50-2, consisting of a floor-mounted device installation box (2-way) including an internal pre-assembled top hat rail and a cover made of coated sheet steel. Lieske Part No.: 209202 Mfg Part No: 1802 Type: KVE50/2RWS |
75,36 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18039 Endstück 3-seitig BR 60x170/80-9001, Kunststoff hfr, cw
Endstück als Formteil zu Brüstungskanal, für einen sauberen Abschluss und zum Abdecken von offenen Enden der Brüstungskanäle, 3-seitig übergreifend für einen an die Wand montierten ... Lieske Part No.: 1280891 Mfg Part No: 18039 Type: BR 60x170/80-ES/3 |
16,19 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18043 end plate alpine white 60x170 mm, 60x170 mm alpine white
End piece as a molded part for parapet ducts, for a clean finish and to cover open ends of the parapet ducts, spanning 4 sides for a parapet duct mounted on wall brackets. Lieske Part No.: 277477 Mfg Part No: 18043 Type: BR3-ES60x170 |
19,01 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18044 device installation trunking, BR3 60x170 / 80, 9001, m.
PVC parapet duct in accordance with DIN EN 50085-2-1 for laying cables directly on the wall or on wall brackets, internal 80 mm upper section for installing commercially available switch ranges in ... Lieske Part No.: 334859 Mfg Part No: 18044 Type: BR360x170/80 |
56,28 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18052 Ranger / RK trunking , 1-field 300 mm alpine white
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 839614 Mfg Part No: 18052 Type: RK110x150-300 |
49,22 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK RK 110x150-550 alpine white cable routing channel 2-field 18056
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 620039 Mfg Part No: 18056 Type: RK110x150-550 |
52,65 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Ggk 18058 Ranger / RK 3-field = 800 mm, light gray
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 606451 Mfg Part No: 18058 Type: RK110x150-800 |
59,63 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK RK 110x150-800 alpine white cable routing trunking 3-field 18060
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 415671 Mfg Part No: 18060 Type: RK110x150-800 |
59,63 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Ggk 18064 Ranger / RK trunking , 4-field 1050 mm alpine white
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 805572 Mfg Part No: 18064 Type: RK110x150-1.050 |
68,01 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18068 Ranger / RK trunking , 5-field 1300 mm alpine white
PVC marshalling duct cover for protection and as a transition from laid cables to distribution cabinets, set consisting of a cover profile, two profile holders with magnets for screwless installation ... Lieske Part No.: 742987 Mfg Part No: 18068 Type: RK110x150-1.300 |
83,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK RK 110x150-2,000 Cover shunting lamination light gray 18070
PVC marshalling duct cover, for protection and as a transition from laid cables to distribution cabinets, can be shortened to any size. The profile holder and the pair of end pieces must be ordered ... Lieske Part No.: 612473 Mfg Part No: 18070 Type: RK110x150-2.000 |
48,51 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
GGK Ranger/RK cover profile 18072 110x150 L=2000 mm alpine white
PVC marshalling duct cover, for protection and as a transition from laid cables to distribution cabinets, can be shortened to any size. The profile holder and the pair of end pieces must be ordered ... Lieske Part No.: 474261 Mfg Part No: 18072 Type: RK110x150-2.000 |
48,51 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18080 RK endcaps 100x150 pair right / left, alpine white f.Rangierkanalabdeckung
End pieces for shunting duct cover, attachable to the cover profile to cover the open sides on the left and right. Lieske Part No.: 880920 Mfg Part No: 18080 Type: RK-Endkappen100x150 |
16,23 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18084 Ranger / RK 1 profile holder + 1 M, alpine white
Profile holder for marshalling duct cover, with a magnet for easy and screwless mounting on the distribution cabinet, screwing is of course also possible on request. Lieske Part No.: 729291 Mfg Part No: 18084 Type: RK-Profilkonsole100x |
18,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18086 Ranger / RK profile bracket, alpine white
Profile holder for marshalling duct cover, with fastening points for screwing onto the distribution cabinet. Lieske Part No.: 677585 Mfg Part No: 18086 Type: RK-Profilkonsole100x |
8,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Ggk 18200 BRS3 ground wire with one potential equalization terminal
Parapet duct lower part made of aluminum in accordance with DIN EN 50085-2-1 for laying cables directly on the wall or on wall brackets, for an internal 45 mm upper part for installing compact M45 ... Lieske Part No.: 743186 Mfg Part No: 18200 Type: Mikro-BRA-UT62x62/45 |
387,59 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 1823 LFG-ES 30x30 stone gray tail, f.Leitungsführungskanal
End piece as a molded part for cable routing ducts, for a clean finish and to cover open ends of the cable routing ducts. Lieske Part No.: 921652 Mfg Part No: 1823 Type: LFG/EST30X30GR |
4,65 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18302 External corner for wall duct, BR3 AEV (joint) 60x130/80, 7035, + / -10 °
Outside corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for laying cables around wall projections. Lieske Part No.: 782895 Mfg Part No: 18302 Type: BR3-AEV60x130/80 |
39,64 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18303 Inner corner for wall duct, BR3-IEV (joint) 60x130 / 80, 7035, +/- 10 °
Internal corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for bypassing corners in rooms. Note: When installing the parapet duct lower parts, a minimum ... Lieske Part No.: 254862 Mfg Part No: 18303 Type: BR3-IEV60x130/80 |
39,13 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Ggk 18308 Outer corner for wall duct, BRA3-AEV (joint) 60x130 / 80
Outside corner as a molded part for parapet duct, angle adjustable with an adjustment range of +/- 10°, for laying cables around wall projections. Lieske Part No.: 122119 Mfg Part No: 18308 Type: BRA3-AEV60x130/80 |
75,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|