Cable duct accessories complete from Niedax
You have been filtering for Niedax and therefore you see now only Cable duct accessories complete from Niedax .
You can choose other manufacturers on the left side in the menu or get the complete overview.
Cable duct accessories complete from Niedax
 |
 Niedax PLA120-78C console channel outer corner PLA120-78 *,
Desk duct external corner base 90°, visible surfaces electrostatically powder-coated in RAL color according to manufacturer catalog, potential equalization is carried out via the inevitably ...Lieske Part No.: 502000 Mfg Part No: PLA120-78C Type: PLA 120-78 C |
303,63 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax PLI120-78S console channel PLI120 Inner-78S,
Inner / Vertikaleck steel, galvanized, also available as a flat angle type: PLI 2 -78 S Quantity: ST. Lieske Part No.: 513517 Mfg Part No: PLI120-78S Type: PLI 120-78 S |
282,84 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax PSTE120-78 joint connector PSTE 120-78,
NIEDAX - Make: PSTE 2 -78 Joint connector for device channel and circuit-console channel, made of spring brass, the joint connector, connect the console channel bottoms electrically and ... Lieske Part No.: 808305 Mfg Part No: PSTE120-78 |
84,55 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RKBA 5 edge protection tape 8x5.5 black with steel coating plastic
Edge protection tape with steel clamping tape, to protect cables from damage on metal and plastic cutting edges, contains halogen. The edge protection tape must be installed in personal danger areas! ... Lieske Part No.: 1327258 Mfg Part No: RKBA5 Type: RKBA 5 |
126,72 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Niedax RSSTAU 108.100 V support asym.closed rectangular tube ungel.108x92mm
Support, asymmetrical, closed, unperforated, for laying cable trays over pipes laid close to the ground of the walkable cable trays, consisting of a horizontal steel pipe and a vertical steel pipe as ... Lieske Part No.: 1586891 Mfg Part No: RSSTAU108.100V Type: RSSTAU 108.100 V |
87,32 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RSSTAU108.200V RSSTAU 108.200 V Stütze asym.geschl.Rechteckrohr ungel.108x192mm
Stütze, asymmetrisch, geschlossen, ungelocht, zur Verlegung von Kabelrinnen über bodennah verlegte Rohre der begehbaren Kabelrinnen, bestehend aus einem horizontalen Stahlrohr und einem vertikal ... Lieske Part No.: 690164 Mfg Part No: RSSTAU108.200V Type: RSSTAU 108.200 V |
89,99 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Niedax RSSTAU108.300V RSSTAU 108.300 V Stütze asym.geschl.Rechteckrohr ungel.108x292mm
Stütze, asymmetrisch, geschlossen, ungelocht, zur Verlegung von Kabelrinnen über bodennah verlegte Rohre der begehbaren Kabelrinnen, bestehend aus einem horizontalen Stahlrohr und einem vertikal ... Lieske Part No.: 690159 Mfg Part No: RSSTAU108.300V Type: RSSTAU 108.300 V |
97,91 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Niedax RSSTAU108.400V RSSTAU 108.400 V Stütze asym.geschl.Rechteckrohr ungel.108x392mm
Stütze, asymmetrisch, geschlossen, ungelocht, zur Verlegung von Kabelrinnen über bodennah verlegte Rohre der begehbaren Kabelrinnen, bestehend aus einem horizontalen Stahlrohr und einem vertikal ... Lieske Part No.: 690162 Mfg Part No: RSSTAU108.400V Type: RSSTAU 108.400 V |
107,12 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
Niedax RSSTAU108.600V RSSTAU 108.600 V Stütze asym.geschl.Rechteckrohr ungel.108x592mm
Stütze, asymmetrisch, geschlossen, ungelocht, zur Verlegung von Kabelrinnen über bodennah verlegte Rohre der begehbaren Kabelrinnen, bestehend aus einem horizontalen Stahlrohr und einem vertikal ... Lieske Part No.: 690163 Mfg Part No: RSSTAU108.600V Type: RSSTAU 108.600 V |
118,21 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RTV110E2 Barrier strip connector ,
NIEDAX - Make: RTV E2 Barrier strip connector, made ​​of stainless steel, material .43 For the mechanical, electrical and positively aligned at the joint in the longitudinal ... Lieske Part No.: 819978 Mfg Part No: RTV110E2 |
111,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RTV60E2 Barrier strip connector RTV60ER,
Divider connectors for mechanical, electrical and longitudinally aligned connection of dividers at the joint. The connection is made by snapping the divider connectors into place at the joint. VDE ... Lieske Part No.: 579493 Mfg Part No: RTV60E2 Type: RTV 60 E2 |
81,38 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RTV85E2 RTV85 E2 Barrier strip connector,
Divider connectors for mechanical, electrical and longitudinally aligned connection of dividers at the joint. The connection is made by snapping the divider connectors into place at the joint. VDE ... Lieske Part No.: 818445 Mfg Part No: RTV85E2 Type: RTV 85 E2 |
96,82 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax RW50 divider ,
NIEDAX - Make: RW 50 Separator, perforated for separation of cables of different voltages and functions, with edge protection, floor flange and continuously profiled for inclusion in soil or ... Lieske Part No.: 679574 Mfg Part No: RW50 |
54,05 EUR
plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Niedax SDB300 Schalldämmblöcke SDB 300,
NIEDAX - Make: SDB 300 Schalldämmblöcke, for airborne sound insulation in wall penetrations, halogen free, flame retardant to DIN 4102, fire rating class B1, asbestos and mineral fibers. The ... Lieske Part No.: 327117 Mfg Part No: SDB300 |
49,80 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax SKM10X80F HEX,
Hexagon screw according to DIN EN ISO 4017, including toothed flange nut according to DIN EN 1661. The strength class of the screw is stamped on the screw head. Especially for connections that have to ... Lieske Part No.: 308005 Mfg Part No: SKM10X80F Type: SKM 10X80 F |
378,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax SKWHM150 protective cap pair H150mm plastic PVC-soft color yellow
Pair of protective caps to cover the ends of the wide span cable ladder. To ensure that the pair of protective caps can be fitted without any problems, a distance of at least 50 mm must be kept from ... Lieske Part No.: 468195 Mfg Part No: SKWHM150 Type: SKWHM 150 |
22,47 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH60 GK-RELEASE PROFILE BRACKET 60 TPH,
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection/industrial ducts, can be used in the side parts of the device ... Lieske Part No.: 233336 Mfg Part No: TPH60 Type: TPH 60 |
89,69 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH 60 E3 separation profile holder channel depth 59mm stainless steel
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection/industrial ducts, can be used in the side parts of the device ... Lieske Part No.: 606128 Mfg Part No: TPH60E3 Type: TPH 60 E3 |
130,68 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH80 GK-separation profile holder ,
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection ducts, can be used in the side parts of the device ducts or ... Lieske Part No.: 320610 Mfg Part No: TPH80 Type: TPH 80 |
105,14 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPH 80 E3 dividing profile holder channel T78mm stainless steel
Separation profile holder, for the vertical installation of a separator and for dividing the interior of device ducts and cable protection ducts, can be used in the side parts of the device ducts or ... Lieske Part No.: 318771 Mfg Part No: TPH80E3 Type: TPH 80 E3 |
135,04 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPK50 plastic divider TPK 50,
NIEDAX - Make: TPK 50 Divider, clip, plastic, for Gerätekänale with bottom flaps with 60 mm, 80 mm and 100 mm deep. VDE certified! Dimensions: Depth = 52 mm (Outer dimensions): folded edge = ... Lieske Part No.: 175712 Mfg Part No: TPK50 |
18,41 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS30 CUT STEEL BAR , GALVANIZED
Divider, for clipping into the base brackets and the joint connector of the device ducts as well as into the divider profile holder/divider retaining plate for cable protection ducts/energy columns, ... Lieske Part No.: 121997 Mfg Part No: TPS30 Type: TPS 30 |
125,93 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS50 Separator TPS 50, 11x50x2000mm zinc-plated
NIEDAX - Make: TPS 50 Divider, clip, from strip galvanized steel according to DIN EN 10346, for Gerätekänale with bottom flaps with 60 mm, 80 mm and 100 mm deep, and LS channels with 60 mm, 80 mm ... Lieske Part No.: 352420 Mfg Part No: TPS50 |
142,56 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax TPS50E3 divider H11mm depth 50mm stainless steel
Divider, for clipping into the tabs of the separating profile holders for cable protection ducts, the potential equalization takes place automatically when clipped in. Use for: separating profile ... Lieske Part No.: 460983 Mfg Part No: TPS50E3 Type: TPS 50 E3 |
946,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|