Cable duct accessories complete from Niedax
You have been filtering for Niedax and therefore you see now only Cable duct accessories complete from Niedax .
You can choose other manufacturers on the left side in the menu or get the complete overview.
Cable duct accessories complete from Niedax
 |
 Niedax LUT100.100.100E3 LUT 100 100 100 E3 tee m.Deckel 100x100mm dispatch width 100mm E
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ...Lieske Part No.: 223210 Mfg Part No: LUT100.100.100E3 Type: LUT 100.100.100 E3 |
160,97 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT 40.040.040 T-piece with cover 40x40mm outlet width 40mm strip galvanized
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, outlet as connection angle with earthing lug, the potential equalization between the ducts is carried out via the ... Lieske Part No.: 677041 Mfg Part No: LUT40.040.040 Type: LUT 40.040.040 |
41,58 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT 40.060.040 T-piece with cover 40x60mm outlet width 40mm strip galvanized
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, outlet as connection angle with earthing lug, the potential equalization between the ducts is carried out via the ... Lieske Part No.: 463149 Mfg Part No: LUT40.060.040 Type: LUT 40.060.040 |
43,76 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT60.060.060 tee LUT6.6.6,
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 950768 Mfg Part No: LUT60.060.060 Type: LUT 60.060.060 |
45,44 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT 60.060.060 E3 T-piece with cover 60x60mm outlet W60mm stainless steel
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 1316413 Mfg Part No: LUT60.060.060E3 Type: LUT 60.060.060 E3 |
123,35 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT60.100.060 tee LUT6.10.6,
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 144423 Mfg Part No: LUT60.100.060 Type: LUT 60.100.060 |
51,78 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT60.100.100 tee LUT6.10.10,
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 706475 Mfg Part No: LUT60.100.100 Type: LUT 60.100.100 |
52,97 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT 60.100.100 E3 T-piece with cover 60x100mm outlet W100mm stainless steel
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 1316412 Mfg Part No: LUT60.100.100E3 Type: LUT 60.100.100 E3 |
138,11 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT60.200.100 tea LUT6.20.10,
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 723913 Mfg Part No: LUT60.200.100 Type: LUT 60.200.100 |
63,16 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT60.200.200 tee LUT6.20.20,
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 589882 Mfg Part No: LUT60.200.200 Type: LUT 60.200.200 |
64,55 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUT80.080.080 tee LUT8.8.8,
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, connection lugs with earthing lug aligned with the duct, these must be bent at right angles to the pre-stamped ... Lieske Part No.: 325410 Mfg Part No: LUT80.080.080 Type: LUT 80.080.080 |
53,46 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC100.100 tee 90degrees LUTC 100,100,
NIEDAX - Make: LUTC . T-piece 9 ø, perforated with lid, for LS-channels, channel bottom, from steel strip galvanized to DIN EN 346, two joint connector LST ... for the electrical and ... Lieske Part No.: 967069 Mfg Part No: LUTC100.100 |
231,26 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC100.100E3 tee LUTC 100.100 E3, 90degrees
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover is automatic when snapped on, accessories for potential equalization, two ... Lieske Part No.: 818447 Mfg Part No: LUTC100.100E3 |
563,31 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC40.060 Tee 90 degree LUTC 40,060, 40x60mm sent with lid. galvanized
NIEDAX - Make: LUTC fourth 6 T-piece 9 ø, perforated with lid, for LS-channels, channel bottom, from steel strip galvanized to DIN EN 346, two joint connector LST ... for the electrical and ... Lieske Part No.: 936710 Mfg Part No: LUTC40.060 |
186,52 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC40.060E3 tee LUTC 40.060 E3, 90degrees
NIEDAX - Make: LUTC 40.060 E3 T-piece 90ø, with lid, for LS-channels, channel bottom without holes, in stainless steel, material no. 1.4301, two joint connector LST ... E3 for the electrical and ... Lieske Part No.: 573248 Mfg Part No: LUTC40.060E3 |
319,08 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC 40.060 R T-piece with cover 40x60mm powder-coated pure white
Cable protection duct T-piece 90°, with snap-on cover, duct base unperforated, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's catalog, the potential ... Lieske Part No.: 1314885 Mfg Part No: LUTC40.060R Type: LUTC 40.060 R |
217,90 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC40.060W Tee 90 degree ,
Cable protection duct T-piece 90°, with snap-on cover, duct base unperforated, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's catalog, the potential ... Lieske Part No.: 973871 Mfg Part No: LUTC40.060W Type: LUTC 40.060 W |
217,90 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC60.060E3 tee LUTC 60.060 E3 90 degrees
NIEDAX - Make: LUTC 6th 6 E3 T-piece 9 ø, perforated with lid, for LS-channels, channel bottom, in stainless steel, material no. .43 , Two joint connector LST ... E3 for the electrical and ... Lieske Part No.: 880146 Mfg Part No: LUTC60.060E3 |
366,20 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC 60.060 R T-piece with cover 60x60mm powder-coated, pure white
Cable protection duct T-piece 90°, with snap-on cover, duct base unperforated, visible surfaces electrostatically powder-coated in RAL color according to manufacturer's catalog, the potential ... Lieske Part No.: 463145 Mfg Part No: LUTC60.060R Type: LUTC 60.060 R |
227,40 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC60.100E3 tee LUTC 60.100 E3 90 degrees
NIEDAX - Make: LUTC 60.100 E3 T-piece 90ø, with lid, for LS-channels, channel bottom without holes, in stainless steel, material no. 1.4301, two joint connector LST ... E3 for the electrical and ... Lieske Part No.: 314853 Mfg Part No: LUTC60.100E3 |
380,66 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC60.150 Tee 90 degree LUTC 60,150, 60x150mm with lid sent. galvanized
NIEDAX - Make: LUTC 6th 5 T-piece 9 ø, perforated with lid, for LS-channels, channel bottom, from steel strip galvanized to DIN EN 346, two joint connector LST ... for the electrical and ... Lieske Part No.: 522004 Mfg Part No: LUTC60.150 |
224,63 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC60.200E3 Tee 90 DEGREES,
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover is automatic when snapped on, accessories for potential equalization, two ... Lieske Part No.: 293978 Mfg Part No: LUTC60.200E3 Type: LUTC 60.200 E3 |
578,16 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC 80.080 T-piece with cover 80x80mm strip galvanized
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover is automatic when snapped on, accessories for potential equalization, two ... Lieske Part No.: 1314911 Mfg Part No: LUTC80.080 Type: LUTC 80.080 |
215,23 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Niedax LUTC 80.080 E3 T-piece with cover 80x80mm stainless steel
Cable protection duct T-piece 90°, with snap-on cover, duct bottom part unperforated, the potential equalization of the cover is automatic when snapped on, accessories for potential equalization, two ... Lieske Part No.: 1314925 Mfg Part No: LUTC80.080E3 Type: LUTC 80.080 E3 |
399,86 EUR
plus delivery charges
Delivery time on requestinfo_outline
|