Buy Shrink Tubing

Shrink tubings are made of synthetic material and become very tight when exposed to heat. They isolate and protect from mechanical and electrical damage. A shrink tubing's diameter reaches from 1 to 1100 mm. The change in size when shrinking varies strongly depending on the material of the hose's synthetics. The shrinking proportion differs from 2:1 to 6:1. When it comes to certain seals, it can also be 10:1.

A hot glue on the inside is responsible for a good sealing. For best results, many manufacturers recommend a ratio of 4:5. A distinction of shrink tubings is made regarding their diameter, wall thickness and shrinking ratio.

Manufacturer no.	Description	Price	Anzahl Bestellen
3M 7000006124	3M 8424.8 (7000006124) 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 1427295	211,96 EUR
3M 7000031603	3M 8430.18 - black 42 6/93 7mm 457mm cold shrink tubing 80610921902 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 318722	923,27 EUR
3M 7000035256	3M 8427.12 - black 17 5/35 1mm 305mm cold shrink tubing KE232082401 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 315836	292,84 EUR
3M 7000035259	3M 8428.12 (7000035259) 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 1427419	378,08 EUR
3M 7000035260	3M 8428.18 - black 23 6/49 2mm 457mm cold shrink tubing KE232082443 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 466754	551,73 EUR
3M 7000035261	3M 8429.9 - black 32 2/67 8mm 229 mn cold shrink tubing KE232082476 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 318721	356,00 EUR
3M 7000035262	3M 8429.18 (7000035262) 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 1427284	619,84 EUR
3M 7000037665	3M GTI-A 3000 3/1 (7000037665) GTI-3000 tubing is co-extruded and features an inner seal. The inner seal securely seals complex parts while the outer wall provides good mechanical protection. The GTI-A 3000 has a shrink ratio of 3:1. The GTI-A 3000 heat shrink tubing is split resistant, features an inner seal and is used as a shrink fit or electrical insulation over cable splices or terminations. The tubing with an expansion ratio of 3:1 is mechanically robust, easily markable and resists cold flow. Temperature resistant from -55 to 135 °C. Sales unit: 20 pieces Lieske Part No.: 1318643	64,55 EUR
3M 7000037666	3M GTI-A 3000 39/13 (7000037666) GTI-3000 Schläuche sind co-extrudiert und verfügen über eine innere Abdichtung. Die innere Abdichtung dichtet komplexe Teile sicher ab, während sie durch die Außenwand einen guten mechanischen Schutz erhalten. Der GTI-A 3000 weist ein Schrumpfverhältnis von 3:1 auf. Der GTI-A 3000 Warmschrumpfschlauch ist spaltfest, verfügt über eine innere Abdichtung und wird als Schrumpfsitz oder elektrische Isolierung über Kabelspleißen oder Endverschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch robust, leicht markierbar und widerstehen dem Kaltfluss. Temperaturbeständig von -55 bis 135°C. Verkaufseinheit: 2 ST. Sales unit: 2 pieces Lieske Part No.: 502302	49,88 EUR
3M 7000092232	3M 8428.6 - black 23 6/49 2mm 152mm cold shrink tubing KE232082427 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 318718	252,35 EUR
3M 7000092233	3M 8429.6 - black 32 2/67 8mm 152mm cold shrink tubing KE232082468 8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment. 8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example. Sales unit: 10 pieces Lieske Part No.: 318720	271,76 EUR
3M 7000092251	3M 8443.4,9 (7000092251) EPDM rubber cold shrink insulation sleeves are factory pre-stretched tubing with a removable support coil inside. Simply prepare the connection, position the tubing and pull out the support coil. The cold shrink sleeves are tubular sleeves with open ends and a sealing mastic. After the insulation sleeve is positioned over a pipe connector, the support coil can be pulled out at one end. This shrinks the ends of the tubing and creates a watertight seal. The size ranges of the core and tubing, together with the sealing mastic at each end, ensure a wider range of applications without compromising the sealing and insulation provided by the EPDM rubber. The active deformation of the specially formulated material ensures permanent sealing and insulation from the environment. Sales unit: 1800 pieces Lieske Part No.: 1312871	27.193,32 EUR
3M 7000099068	3M HSR 25,4/12,7 gys (7000099068) Robust and versatile - the thin-walled heat shrink tubing without hot melt adhesive in the practical dispenser box. The HSR heat shrink tubing is a thin-walled heat shrink tubing made of modified, radiation-crosslinked polyolefin. It is suitable for a wide range of applications, especially for electrical insulation and marking of connections. The heat shrink tubing is extremely resistant to aging and remains highly flexible over the long term. Its shrinkage rate is two to one. It is self-extinguishing and can be used in a temperature range from -55 °C to +135 °C. The dispenser box supplied enables efficient storage and handling, as you can easily shorten the tubing to the ideal length. Sales unit: 15 pieces Lieske Part No.: 1427332	501,93 EUR
3M 7000099135	3M HSR 3000 1,5/0,5 bk (7000099135) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 5 pieces Lieske Part No.: 1312873	146,97 EUR
3M 7000099136	3M HSR 3000 3/1 bk (7000099136) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 5 pieces Lieske Part No.: 1312874	156,32 EUR
3M 7000099146	3M HSR3000-24/8RD (7000099146) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 3 ST. Sales unit: 3 pieces Lieske Part No.: 498624	96,23 EUR
3M 7000099150	3M HSR 3000 9/3 ye (7000099150) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST. Sales unit: 15 pieces Lieske Part No.: 498622	475,35 EUR
3M 7000099151	3M HSR3000-18/6YE (7000099151) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 45 ST. Sales unit: 45 pieces Lieske Part No.: 498621	1.388,18 EUR
3M 7000099152	3M HSR3000-24/8YE (7000099152) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST. Sales unit: 15 pieces Lieske Part No.: 498618	481,14 EUR
3M 7000099153	3M HSR 3000 18/6 gr (7000099153) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 15 pieces Lieske Part No.: 1583746	462,73 EUR
3M 7000099155	3M HSR 3000 3/1 bl (7000099155) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 3 pieces Lieske Part No.: 1312875	93,79 EUR
3M 7000099156	3M HSR 3000 6/2 bl (7000099156) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 3 ST. Sales unit: 3 pieces Lieske Part No.: 498617	104,84 EUR
3M 7000099158	3M HSR 3000 18/6 bl (7000099158) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 3 pieces Lieske Part No.: 1312876	92,55 EUR
3M 7000099160	3M HSR 3000 3/1 gr (7000099160) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 15 pieces Lieske Part No.: 1312877	468,96 EUR
3M 7000099161	3M HSR3000-1.5/0.5WH (7000099161) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST. Sales unit: 15 pieces Lieske Part No.: 498616	440,90 EUR
3M 7000099162	3M HSR3000-3/1WH (7000099162) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 45 ST. Sales unit: 45 pieces Lieske Part No.: 498613	1.406,89 EUR
3M 7000099163	3M HSR3000-6/2WH (7000099163) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST. Sales unit: 15 pieces Lieske Part No.: 498638	524,21 EUR
3M 7000099164	3M HSR 3000 9/3 white heat shrink tubing thin wall roll 7m TE100042346 - HSR3000-9/3WH HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 15 pieces Lieske Part No.: 2110902	475,35 EUR
3M 7000099165	3M HSR3000-18/6WH (7000099165) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST. Sales unit: 15 pieces Lieske Part No.: 498636	462,73 EUR
3M 7000099166	3M HSR3000-24/8WH (7000099166) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 15 ST. Sales unit: 15 pieces Lieske Part No.: 498635	481,14 EUR
3M 7000099172	3M HSR 3000 18/6 clr (7000099172) Warmschrumpfschläuche HSR-3000 sind eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem halogenfreiem Polyolefin bestehen. HSR 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. HSR 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Warmschrumpfschläuche HSR-3000 sind für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste, halogenfreie Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 3 ST. Sales unit: 3 pieces Lieske Part No.: 498634	92,55 EUR
3M 7000099174	3M HSR 3000 9/3 gr (7000099174) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 15 pieces Lieske Part No.: 1312863	475,35 EUR
3M 7000099178	3M HSR 3000 18/6 gys (7000099178) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 3 pieces Lieske Part No.: 1312837	92,55 EUR
3M 7000099179	3M HSR 3000 24/8 gys (7000099179) HSR-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked halogen-free polyolefin. HSR 3000 provides good insulation protection in various industrial applications. It is also suitable for cable marking and identification applications. HSR 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. HSR-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant, halogen-free tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 3 pieces Lieske Part No.: 1313385	96,23 EUR
3M 7000099205	3M GTI 50,8/25,4 bk (7000099205) 3MT Heat Shrink Tubing GTI is a RoHS flexible heat shrink tubing range. The tubes have a flame retardant wall made of cross-linked polyolefin. They provide reliable performance for electrical splices, joints and connections up to 600V. GTI heat shrink tubing is available in many different colors and sizes with a shrink ratio of 2:1. This GTI heat shrink tubing kit is supplied in a convenient sorting box (size 270mm x 160mm x 60mm). 3MT Heat Shrink Tubing GTI is color coded for quick and easy wire identification. This split-resistant, flame retardant tubing is used as a shrink fit as well as electrical insulation over cable splices or terminations. The tubing with a 2:1 expansion ratio is mechanically tough, easily markable and resists cold flow. The tubing is ideal for lightweight harness covering, fire resistant covering, cable marking, cable bundling and component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Lieske Part No.: 1318835	25,36 EUR
3M 7000099216	3M GTI 3000 18/6 bl (7000099216) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 10 pieces Lieske Part No.: 1318834	77,32 EUR
3M 7000099219	3M GTI 3000 18/6 gys (7000099219) Schrumpfschlauch GTI-3000 ist eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem, halogenfreiem Polyolefin bestehen. GTI 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. GTI 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Schrumpfschlauch GTI-3000 ist für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 10 ST. Sales unit: 10 pieces Lieske Part No.: 502328	77,32 EUR
3M 7000099220	3M GTI 3000 18/6 rd (7000099220) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 10 pieces Lieske Part No.: 1318704	77,32 EUR
3M 7000099227	3M GTI 3000 24/8 gys (7000099227) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 5 pieces Lieske Part No.: 1563503	47,72 EUR
3M 7000099230	3M GTI 3000 24/8 ye (7000099230) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 5 pieces Lieske Part No.: 1318832	47,72 EUR
3M 7000099231	3M GTI 3000 3/1 bl (7000099231) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 20 pieces Lieske Part No.: 1318818	64,55 EUR
3M 7000099232	3M GTI 3000 3/1 br (7000099232) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 20 pieces Lieske Part No.: 1318823	64,55 EUR
3M 7000099234	3M GTI 3000 3/1 gys (7000099234) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 20 pieces Lieske Part No.: 1318822	64,55 EUR
3M 7000099239	3M GTI 3000 39/13 br (7000099239) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 2 pieces Lieske Part No.: 1318821	31,36 EUR
3M 7000099242	3M GTI 3000 39/13 rd (7000099242) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 2 pieces Lieske Part No.: 1318820	31,36 EUR
3M 7000099243	3M GTI 3000 39/13 wh (7000099243) Schrumpfschlauch GTI-3000 ist eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem, halogenfreiem Polyolefin bestehen. GTI 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. GTI 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Schrumpfschlauch GTI-3000 ist für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 2 ST. Sales unit: 2 pieces Lieske Part No.: 502329	31,36 EUR
3M 7000099244	3M GTI 3000 39/13 ye (7000099244) Schrumpfschlauch GTI-3000 ist eine Reihe von flexiblen, dünnwandigen RoHS-Schrumpfschläuchen, die aus vernetztem, halogenfreiem Polyolefin bestehen. GTI 3000 bietet einen guten Isolationsschutz in verschiedenen industriellen Anwendungen. Sie eignen sich auch für Anwendungen zur Kabelkennzeichnung und -identifikation. GTI 3000 Schläuche haben ein Schrumpfverhältnis von 3:1 und sind in den folgenden Farben erhältlich: Transparent, schwarz, rot, gelb, blau, weiß, grün, grau, und grün/gelb gestreift. Schrumpfschlauch GTI-3000 ist für eine schnelle und einfache Identifizierung der Ader farbcodiert. Dieser spaltfeste Schlauch wird als schrumpffähige, elektrische Isolierung über Kabelspleißen oder -abschlüssen verwendet. Die Schläuche mit einem Expansionsverhältnis von 3:1 sind mechanisch zäh, leicht markierbar und widerstehen dem Kaltfluss. Er ist ideal als leichte Schutzabdeckung für Kabelbäume, zur Kennzeichnung und Bündelung von Adern und zur Verpackung von Komponenten geeignet. Er ist temperaturbeständig von -55 bis 135°C und RoHS 2011/65/EU konform. Verkaufseinheit: 2 ST. Sales unit: 2 pieces Lieske Part No.: 502331	31,36 EUR
3M 7000099245	3M GTI 3000 6/2 bl (7000099245) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 20 pieces Lieske Part No.: 1318676	87,52 EUR
3M 7000099247	3M GTI 3000 6/2 br (7000099247) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 20 pieces Lieske Part No.: 1318833	87,52 EUR
3M 7000099249	3M GTI 3000 6/2 gys (7000099249) GTI-3000 heat shrink tubing is a range of flexible, thin-wall RoHS heat shrink tubing made from cross-linked, halogen-free polyolefin. GTI 3000 offers good insulation protection in various industrial applications. They are also suitable for cable marking and identification applications. GTI 3000 tubing has a 3:1 shrink ratio and is available in the following colours: Clear, black, red, yellow, blue, white, green, grey, and green/yellow stripe. GTI-3000 heat shrink tubing is colour coded for quick and easy wire identification. This split-resistant tubing is used as shrinkable, electrical insulation over cable splices or terminations. The tubing, with a 3:1 expansion ratio, is mechanically tough, easily markable and resists cold flow. It is ideal as a lightweight protective covering for wire harnesses, for wire marking and bundling, and for component packaging. It is temperature resistant from -55 to 135 °C and RoHS 2011/65/EU compliant. Sales unit: 20 pieces Lieske Part No.: 1318633	87,52 EUR

Shrink tubings are mainly being used to protect cables underground. They protect from moisture getting in.

We also have shrink tubings for special purposes in our product range and can deliver any amount you require. Whether you buy by the meter on a coil, whether you need black, colored or transparent. We have the solution for almost any purpose.

We hope you enjoy browsing our product category and are always happy to answer all the questions you might have. If you can't find what you are looking for, we gladly try to get it for you.