Xaver Bechtold 10130406, EAN: 4010480004500

Xaver Bechtold 10130406 Control Cable 7x1.0 mm²

Cables > Control line > Flexible Control lines

Xaver Bechtold 10130406 Control Cable 7x1.0 mm²

Lieske Part No. 868649
Mfg Part No 10130406
EAN-Code 4010480004500
Manufacturer Xaver Bechtold
Here only 199,65 EUR
237,58 EUR incl. VAT

Further information for Xaver Bechtold 10130406 Control Cable 7x1.0 mm²

General
Nominal voltage300/500 V
Test voltage4000 V
Temperature range in motion-5 to +70 °C
Temperature range, non-operating-40 to +80 °C
Bend radius for fixed installation4 x cable diameter
Bend radius flexible15 x cable diameter
Flame retardancyVDE 0472 T. 804 test type B (IEC = 332-1)
ConductorCopper stranded wire, bare, fine-stranded in accordance with VDE 0295 Class 5
Wire insulationPVC
SheathPVC
Conductor markingContinuous digit printing with green-yellow protective conductor in accordance with VDE 0293-308
Number of cores7 piece
Core cross section1,0 mm²
Jacket colourGrey
Chemical resistanceResistant to acids, alkalis, certain hydrocarbon compounds
The control cable YSLY-JZ 7X1.0 from Xaver Bechtold is a flexible cable for use in industrial plants, particularly in machine tools, conveyor and assembly lines, and material handling systems. It is suitable for both fixed installation and flexible applications, where the cable is moved without tensile stress and without forced guidance. The cable can be used in dry, damp, and wet rooms, making it suitable for various operating conditions in plant engineering.

Applications

The cable is designed for use in industrial control systems, where reliable signal transmission between control devices and drives is required. It is commonly used in production plants, assembly lines, and material handling systems, where mechanical stresses of moderate intensity occur. Use in wet or damp environments is possible due to the PVC insulation and sheath, although the cable is not intended for permanent underwater application.

Functions and equipment in detail

The cable features seven conductors with a cross-section of 1.0 mm², one of which is a green-yellow protective earth conductor. The conductors are marked with a continuous numerical designation, enabling easy identification and wiring. The conductors consist of bare, fine-stranded copper wires according to VDE 0295 class 5, ensuring high flexibility and durability during mobile installation. The conductor insulation and the outer sheath are made of PVC, making the cable largely resistant to mechanical stresses and chemical influences such as acids, alkalis, and certain hydrocarbon compounds.

Technology explained simply

The designation YSLY-JZ describes the cable according to standard VDE 0888-100. Here, Y stands for the PVC sheath, S for the protective earth conductor configuration, L for the stranded structure of the conductors, Y for the PVC insulation of the conductors, and JZ for the marking with continuous numbers and a green-yellow protective earth conductor. The rated voltage is 300/500 V, which is sufficient for most industrial control applications. The test voltage of 4000 V ensures electrical strength. The temperature resistance is -5 °C to +70 °C for mobile installation and -40 °C to +80 °C for fixed installation. The bending radius is 4 times the cable diameter for fixed installation and 15 times for flexible applications, defining the mechanical load capacity. Flame retardancy corresponds to VDE 0472 part 804, test type B (equivalent to IEC 332-1), ensuring limited flame spread in the event of a short circuit or fire.

Compatibility and accessories

The control cable is suitable for use with standard connectors, terminals, and switching devices in industrial environments. The numbered marking of the conductors simplifies wiring and maintenance. The cable can be combined with other YSLY control cables, especially in plants requiring uniform cable design. The use of protective earth conductors (JZ) is required if the plant is to be earthed.

Installation and mounting

Installation is carried out by fixed routing in cable ducts, trays, or on cable trees. For flexible applications, the cable must be moved without tensile stress, and the specified bending radius must be observed. The cable is not intended for routing in moving parts such as cable loops or in cable carriers, as the mechanical stresses are higher there. Mounting is done using standard tools such as cable cutters and cable crimpers.

Advantages in operation

The cable offers high mechanical and chemical resistance, extending its service life in industrial environments. The clear marking of the conductors reduces errors during installation and maintenance. The PVC insulation and sheath provide good insulation and protection against external influences. Flame retardancy increases operational safety, especially in plants with increased fire risk.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/868649
qrcode für Xaver Bechtold 10130406 Control Cable 7x1.0 mm²