Order Data:

Product Type:

ZQ 900-02N

Article Number:

101186147

EAN (European Article Number):

4030661325941

eCl@ss Number, Version 12.0:
27-37-12-01

eCl@ss Number, Version 11.0:
27-37-12-01

eCl@ss Number, Version 9.0:
27-37-12-01

ETIM Number, Version 7.0:
EC002033

ETIM Number, Version 6.0:
EC002033

Approvals - Regulations:

Certificates:
cULus
CCC

General Data:

Regulations:
EN ISO 13850
EN IEC 60947-5-1
EN IEC 60947-5-5

Housing Material:

Metal, Zinc Die-Cast

Housing Coating Material:

Painted

Housing Cover Material:

Plastic, Thermoplastic

Rope Length, Maximum:
75 m

Gross Weight:

1,248 g

General Data - Features:

Emergency Stop Button:
Yes

Indicator Light:

No

Number of Safety Contacts:

2

Safety Considerations:

Regulations:
EN ISO 13849-1

Service Life:

20 years

Safety Consideration - Safety Outputs:

B10D Normally Closed (NC):
100,000 switching cycles

Mechanical Data:

Minimum Mechanical Life:
1,000,000 switching cycles

Mechanical Data - Connection Technology:

Connection Type:
Screw Connection M20 x 1.5

Minimum Conductor Cross-Section:

0.75 mm²

Maximum Conductor Cross-Section:

2.5 mm²

Note:

All details include ferrules.

Mechanical Data - Dimensions:

Sensor Length:
97.2 mm

Sensor Width:

71.5 mm

Sensor Height, Minimum:
220.3 mm

Sensor Height, Maximum:
236.3 mm

Environmental Conditions:

Protection Class:
IP65

Ambient Temperature:

-25 ... +70 °C

Maximum Relative Humidity:

95 %

Environmental Conditions - Insulation Ratings:

Rated Insulation Voltage Ui:
500 V

Rated Impulse Withstand Voltage Uimp:

6 kV

Electrical Data:

Thermal Continuous Current:
6 A

Voltage, Utilization Category AC-15:
230 VAC

Current, Utilization Category AC-15:
4 A

Voltage, Utilization Category DC-13:
24 VDC

Current, Utilization Category DC-13:
1 A

Switching Element:

Normally Closed (NC)

Switching Principle:

Snap-Action

Contact Material, Electrical:
Silver

Notes:

• For rope lengths over 10 m, rope supports are required every 3 to 5 m.
• Recommended rope length for rope-pull emergency switches depending on the ambient temperature range.
• After installation, the rope should be pulled forcefully several times to address deformation of the thimbles. Subsequently, the rope should be retensioned using the eye bolt or turnbuckle.
• Rope supports are required every 2 to 5 meters, see accessories.
• The screw-in indicator light G24-M20 must be ordered separately, see accessories.