Product description in English:

The BNS 260-11/01Z-R magnetic safety sensor is a robust and reliable solution for safety-critical applications in industrial environments. It is specifically designed for right-hinged doors and tolerates a certain offset between the sensor and actuator. The sensor is rated according to EN ISO 13849-1 for a service life of up to 20 years and 25,000,000 switching cycles (B10D).

With its high IP67 protection class and fiberglass-reinforced thermoplastic housing, it is highly resistant to environmental influences. The sensor includes one normally open (NO) and two normally closed (NC) contacts, with a maximum switching voltage of 75 VDC.

Technical specifications:

Ordering information:

• Product designation: BNS 260-11/01Z-R
• Article number: 101184372
• EAN: 4030661321707
• eCl@ss number: 27-27-44-01
• ETIM number: EC002544

Approvals and standards:

• Certifications: cULus
• Standards: BG-GS-ET-14, EN IEC 60947-5-3

General specifications:

• Coding level: Low
• Operating principle: Magnetic
• Material: Fiberglass-reinforced thermoplastic
• Gross weight: 56 g

Mechanical specifications:

• Door hinge: Right
• Dimensions: Length 13 mm, Width 26 mm, Height 36 mm
• Switching distances:
- Secured switching distance ON (Sao): 5 mm
- Secured switching distance OFF (Sar): 15 mm

• Connection: Cable, cable length 1 m
• Wire cross-section: 0.25 mm² / 23 AWG
• Movement direction: Frontal to the active surface

Electrical specifications:

• Switching voltage: max. 75 VDC
• Switching current: max. 0.4 A
• Switching power: max. 10 VA
• Switching elements: 1 normally open (NO), 2 normally closed (NC)
• Switching frequency: max. 5 Hz

Environmental conditions:

• Protection class: IP67
• Operating temperature: -25 °C to +70 °C
• Vibration resistance: 10–55 Hz, amplitude 1 mm
• Shock resistance: 30 g / 11 ms

Delivery:

• Actuator not included in the scope of delivery.

Accessories:

• Recommended actuators: BPS 260
• Recommended safety control units: SRB-E-301ST, SRB-E-201LC

Notes:

• Contact assignments for versions with or without LEDs are identical.
• Contact symbols are shown with the safety device closed.