Schmersal SRB402EM (101170840)
Schmersal SRB402EM (101170840)
Lieske Part No.
1331129
Mfg Part No
101170840
EAN-Code
Manufacturer
Schmersal
Here only
245,23 EUR
291,82 EUR incl. VAT
Further information for Schmersal SRB402EM (101170840)
Order Data:
Replaces Article Number: 101175611
Product Type: SRB402EM
Article Number (Order Number): 101170840
EAN (European Article Number): 4250116201518
eCl@ss Number:
Version 12.0: 27-37-18-19
Version 11.0: 27-37-18-19
Version 9.0: 27-37-18-19
ETIM Number:
Version 7.0: EC001449
Version 6.0: EC001449
Approvals - Regulations:
Certificates:
- cULus
- CCC
General Data:
Regulations:
- EN IEC 62061
- EN ISO 13849-1
- EN IEC 60947-5-1
- EN IEC 60947-5-3
- EN IEC 60947-5-5
- EN IEC 61508
- EN IEC 60204-1
- EN IEC 60947-1
Environmental Condition: EN 60068-2-78
Housing Material: Plastic, glass-fiber reinforced thermoplastic, ventilated
Gross Weight: 250 g
General Data - Features:
Wire Break Detection: Yes
Removable Terminals: Yes
Feedback Loop: Yes
Automatic Reset Function: Yes
Ground Fault Detection: Yes
Integrated Status Display: Yes
Number of Auxiliary Contacts: 2
Number of LEDs: 1
Number of NC Contacts: 1
Number of Safety Contacts: 4
Safety Consideration:
Regulations:
- EN ISO 13849-1
- EN IEC 61508
Stop Category: 0
Mechanical Data:
Mechanical Lifespan, Minimum: 10,000,000 Switching Cycles
Mounting: Quick Mounting on Standard Rail According to DIN EN 60715
Connection Type: Plug-in Screw Terminals
Connection Cross-Section, Minimum: 0.25 mm²
Connection Cross-Section, Maximum: 2.5 mm²
Terminal Torque: 0.6 Nm
Environmental Conditions:
Enclosure Protection: IP40
Installation Area Protection: IP54
Terminal Protection: IP20
Operating Temperature: -25 ... +45 °C
Storage and Transport Temperature: -40 ... +85 °C
Vibration Resistance: 10 ... 55 Hz, Amplitude 0.35 mm
Shock Resistance: 10 g / 11 ms
Electrical Data:
Frequency Range: 50 Hz / 60 Hz
Operating Voltage: 24 VAC -15 % / +10 %, 24 VDC -15 % / +20 %
Ripple: 10 %
Rated Operating Voltage: 24 VAC / 24 VDC
Power Consumption: 1 W / 1 VA
Status Display:
Displayed Functions: Relay Position K1/K2
Note:
Inductive loads (contactors, relays, etc.) must be protected by appropriate circuits.
Power Level: 1-channel control of the expansion module suitable for contact amplification or multiplication.
This is an offer of:
Lieske Elektronik e.K.
Reutener Str. 10
79279 Vörstetten
http://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111
Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1331129