The IFL 15-300L-10/01P is a reliable inductive proximity switch with a nominal switching distance of 15 mm. Designed for demanding industrial environments, it offers IP65 protection and a durable plastic construction. With an integrated yellow LED status indicator and flexible connection via screw terminals, the sensor is user-friendly and easy to install. It is available as both a normally open (NO) and normally closed (NC) switch, with built-in protection against induction and polarity reversal. Ist compact M30 threaded design allows for non-flush mounting.
Technical Data:
Product Designation:
Article Number:
EAN:
Certifications and Standards:
- CCC
- DIN VDE 0660-208, EN IEC 60947-5-2
Housing Design:
Materials:
- Housing: Plastic
- Active Face: Plastic
- Nut: Plastic
- Pressure Disk: Perbunan®
Gross Weight:
Features:
- Integrated Indicator: Status indicator (yellow LED)
- Number of Wires: 3
Mechanical Data:
- Nut Tightening Torque: Max. 4 Nm
- Nominal Switching Distance (Sn): 15 mm
Connection Technology:
- Connection Type: Screw terminal PG9
- Max. Conductor Cross-section: 1 x 1.5 mm²
Dimensions:
- ISO Thread: M30
- Wrench Size: 36 SW
- Sensor Length: 118 mm
Environmental Conditions:
- Protection Rating: IP65
- Ambient Temperature: -25 °C to +70 °C
- Vibration Resistance: 10 … 55 Hz, Amplitude 1 mm
- Shock Resistance: 30 g / 11 ms
- Protection Class: II
Electrical Data:
- Voltage Type: DC
- Idle Current (typical): 5.5 mA
- Operating Voltage: 10 … 60 VDC
- Operating Current: 400 mA
- Switching Element: Normally Open (NO) or Normally Closed (NC)
- Protective Circuits:
- Inductive protection
- Polarity reversal protection
- Switching Frequency: Approx. 100 Hz
Digital Outputs:
- Voltage Drop (Du): Max. 1.5 V
- Current at Voltage Drop (Du): 0.4 A
- Switching Elements: p-switching
Note:
- Nuts can be replaced with a clamping bracket upon request.
- Programming in the terminal area is possible by repositioning the connector.