| General |
| Actuator material | Stainless steel (V2A) |
| Coding level according to EN ISO 14119 | low |
| Actuation radius, minimum | 160 mm |
| Actuator | straight, rigid |
The AZ 15/16-B1 actuator from Schmersal is a mechanical actuator specifically designed for use with safety switches of the AZ 15 and AZ 16 series. It serves as a mechanical activator that triggers the switch by movement of a protective device, such as a door, flap, or hood. The construction from stainless steel (V2A) ensures high robustness and corrosion resistance, making it suitable for use in industrial environments. The actuator is rigid and straight, ensuring precise and reliable mechanical transmission of movement.
Applications
The actuator is intended for rotating protective devices where mechanical actuation of the safety switch is required. Typical applications are found in the machine construction industry, particularly on movable protective covers that must activate the safety switch upon opening. The minimum actuation movement is 160 mm, enabling precise and defined triggering. This is particularly important to ensure that the switch is only activated with sufficient movement, thereby increasing safety.
Functions and Equipment in Detail
The actuator features a low coding level according to the standard EN ISO 14119. This standard regulates the coding of actuators for safety switches to prevent incorrect operation or unintended activation. A low coding level means that the actuator can easily be replaced by other actuators of the same design, simplifying maintenance and interchangeability. The gross weight is 18 g, making the actuator light and easy to install without impairing its mechanical function.
Technology Explained Simply
The actuator is made of stainless steel (V2A), a material known for its high strength and resistance to moisture and chemical influences. This makes it particularly suitable for use in environments with increased corrosion risk, such as in the food industry or outdoor installations. The rigid, straight design ensures that the movement of the protective device is transmitted directly and without delay to the switch. The minimum actuation movement of 160 mm is dimensioned to guarantee secure and unambiguous triggering of the switch, without the actuator reacting too early or too late.
Compatibility and Accessories
The actuator is specifically developed for safety switches of the AZ 15 and AZ 16 series. It is compatible with these switches and can be connected directly. As suitable accessories, the actuator XCSZ15 for XCS switches is offered, which is, however, not compatible with the AZ 15/16-B1. The use of actuators of other designs is not intended and may lead to malfunctions.
Mounting and Installation
Mounting is done directly onto the safety switch of the AZ 15 or AZ 16 series. Due to the low weight of 18 g, installation is simple and does not require additional fastening elements. The rigid design allows for precise alignment, ensuring that the actuation movement is accurately matched to the switch. Mounting is typically done without tools, with the exact procedure depending on the respective switch model.
Advantages in Operation
The actuator offers high reliability due to its robust stainless steel construction and precise mechanical transmission. The low coding level according to EN ISO 14119 simplifies replacement and maintenance. The low weight of 18 g reduces mechanical stress and enables easy installation. The minimum actuation movement of 160 mm ensures secure and unambiguous triggering of the switch, increasing machine safety. The use of stainless steel (V2A) ensures long service life even under demanding operating conditions.