The IFL 10-30-10/01YG is a high-quality cylindrical proximity sensor with a rugged, nickel-plated brass housing suitable for flush mounting. Equipped with a yellow LED status indicator, this sensor delivers reliable performance in operating temperatures from -25 to +70 °C. It is ideal for industrial applications requiring precision and durability.

Technical Data:

Product Designation:

• IFL 10-30-10/01YG

Article Number:

• 101056832

EAN:

• 4030661022024

eCl@ss Numbers:

• Version 12.0: 27-27-40-01
• Version 11.0: 27-27-01-01
• Version 9.0: 27-27-01-01

ETIM Numbers:

• Version 7.0: EC002714
• Version 6.0: EC002714

Approvals - Regulations:

• Certificates: CCC
• Standards: DIN VDE 0660-208, EN IEC 60947-5-2

General Data:

• Housing Design: Cylinder, Thread
• Installation Conditions: Flush
• Housing Material: Brass
• Housing Coating: Nickel-plated
• Active Face Material: Plastic
• Nut Material: Brass
• Gross Weight: 156 g

Features:

• Integrated Indicator, Status: Yes
• Number of Wire Cores: 2

Mechanical Data:

• Nut Torque, max.: 30 Nm

Switching Distances per EN IEC 60947-5-3:

• Nominal Switching Distance Sn: 10 mm

Connection Technology:

• Connection Type: Screw Connection PG9
• Max. Connection Cross-Section: 1 x 1.5 mm²

Dimensions:

• ISO Thread of Sensor: M30
• Wrench Size: 36 SW
• Sensor Length: 126 mm

Environmental Conditions:

• Protection Rating: IP65
• Operating Temperature: -25 ... +70 °C
• Vibration Resistance: 10 … 55 Hz, Amplitude 1 mm
• Shock Resistance: 30 g / 11 ms
• Protection Class: II

Insulation Properties:

• Rated Impulse Voltage Uimp: 4 kV

Electrical Data:

• Rated Supply Frequency: 45 … 65 Hz
• Voltage Type: AC
• Operating Current, min.: 10 mA
• Rated Operating Voltage: 90 ... 250 VAC
• Rated Operating Current: 500 mA
• Switching Element: Normally Open (NO) or Normally Closed (NC)
• Integrated Protective Circuit: Induction Protection
• Switching Frequency: approx. 10 Hz

Digital Outputs:

Voltage Drop Ud, max.: 4.5 V

Current at Voltage Drop Ud: 0.2 A

Switching Elements: Two-Wire

Residual Current Ir, max.: 1 mA

Status Indicator:

Note: Yellow LED

Notes:

Nuts can be replaced with a clamp if needed.

Programming in the connection area by repositioning the plug.