Further information for Eltako 30100030 FSR61NP-230V Radio Relay Surge Switching
General
Switching power
10 A/250V AC
Supply voltage
230 V
Release-delay
2 to 120 minutes
Push-button constant light
Switchable
Pre-warning of switching-off
Switchable
Stand-by loss
0,8 Watt
Wireless technology
encrypted, bidirectional, Repeater
Switching type
non-isolated
LED function
Learning process, wireless control commands
Pre-programmed sensors
Wireless window/door contacts, FAH, FBH
Constant light duration
2 hours
Switch-off warning duration
approx. 30 seconds
Safety function
automatic shutdown after 2–120 seconds if command not detected
Compatibility
Function key, central control key, FAH, FBH
Adjustable safety time
2 to 120 Seconds
Neon lamp current
not approved
Radio telegram transmission
on state change and central control
Pre-programmed push-button count
up to 35
Synchronization after installation
Automatic
LED indicator
Panel mounting
Scene control
Central control unit
Adjustable reset delay
The Eltako FSR61NP-230V is a radio actuator with integrated inrush current switching relay, designed for flush mounting in electrical installations. It functions as a non-potential-free switch with a rated capacity of 10A/250V AC and is suitable for controlling 230V LED lamps up to 400W and incandescent lamps up to 2000W. The supply, switching, and control voltage is locally provided via 230V. In the event of supply voltage failure, the current switching state is retained, and upon restoration of voltage, the switch is defined to turn off. After installation, the device requires a short automatic synchronization before the connected load is connected to the network.
Applications
This radio actuator is designed for use in intelligent building automation systems, particularly in residential and commercial buildings, where flexible and decentralized control of lighting and loads is required. It is suitable for applications such as dusk-to-dawn switches, motion detection, scene control, and as part of a radio network with bidirectional communication. The functionality can be combined with various sensors, including radio window-door contacts, radio outdoor light sensors FAH, and radio motion detectors FBH.
Functions and Equipment in Detail
The FSR61NP-230V features an upper and a lower rotary switch for configuring the operating mode. Using the upper rotary switch, the user can choose between the function ER (switching relay) and ESV (inrush current switch). When ESV is selected, an optional fallback delay of 2 to 120 minutes can be set. The position infinite activates the standard inrush current switch function ES without fallback delay, along with push-button continuous lighting and switch-off warning. Additionally, push-button continuous lighting and switch-off warning can be activated. When push-button continuous lighting is enabled, holding the button for longer than 1 second activates continuous lighting, which turns off automatically after 2 hours or can be manually deactivated by pressing the button. The switch-off warning is indicated by flickering of the lighting, starting approximately 30 seconds before automatic switch-off, occurring three times in increasingly shorter intervals. When both push-button continuous lighting and switch-off warning are activated, the continuous lighting turns off before the switch-off warning begins.
Technology Explained Simply
The radio actuator operates using encrypted radio, with bidirectional communication and repeater function optionally activatable. Every state change and incoming central control telegram is confirmed by a radio telegram, which can be learned into other actuators, controllers, or universal displays. Control is achieved via an internal antenna, allowing the radio actuator to also be controlled locally via a conventional 230V control switch. Glow lamp current is not permitted. The LED serves during operation to indicate radio control commands by brief flashing and supports the learning process according to the instruction manual.
Compatibility and Accessories
The FSR61NP-230V can be combined with encrypted sensors, radio window-door contacts, radio outdoor light sensors FAH, and radio motion detectors FBH. Up to 35 radio switches, including central control switches, can be learned via the upper rotary switch. Scene control allows multiple FSR61 units to be controlled via a single scene switch with double toggle, which has been learned in. When set to ER (switching relay), the lower rotary switch provides a safety and energy-saving function: if a switch-off command is not detected — for example, due to a stuck or too quickly operated switch — the relay automatically turns off after an adjustable time period of 2 to 120 seconds. This function is deactivated when an FTK (radio switch kit) is learned in.
Mounting and Installation
The radio actuator is designed for flush mounting and has dimensions of 45 mm (length) × 45 mm (width) × 33 mm (depth). Mounting is done in a suitable flush-mounted box, and electrical connections must be made in accordance with installation regulations. The automatic synchronization after installation must be awaited before connecting the connected load to the network.
Advantages in Operation
The FSR61NP-230V features a low standby loss of 0.8 W, enhancing energy efficiency. The fallback delay and switch-off warning provide additional safety and user-friendly functions. Bidirectional radio communication enables feedback of state changes, which is beneficial for integration into intelligent control systems. The combination of radio and conventional control offers flexibility during commissioning and use.
Functions, Technology, Standards
The radio actuator uses encrypted radio, bidirectional communication, and can function as a repeater. The fallback delay is adjustable, as are push-button continuous lighting and switch-off warning. Power supply is via 230V, and the switching capacity is 10A/250V AC. Flush mounting is intended, and dimensions are 45 mm × 45 mm × 33 mm. The LED indicator signals radio control commands and supports the learning process.