| General |
| Degree of protection | not specified |
| Operating voltage | 230 V |
| Control voltage | 8..230 V UC |
| Contact type | 2 + 2 Normally open contacts (NO) non-isolated |
| Contact rating | 5 A |
| Voltage category | 250 V AC |
| Stand-by loss | 0,5 W |
| Mounting method | rack-mounted device on mounting rail DIN-EN TH35 |
| Pitch unit | 1 TE |
| Number of motors | 2 max. |
| Compatibility | EGS12Z-UC |
| Function lockout | Rotary switch for up/down and switching off |
The Eltako MTR12-UC is a motor disconnect relay for controlling up to two 230V tube motors in shading systems or roller shutter installations. It serves as a safety and disconnect unit to prevent back-voltage that can occur when motors are directly connected in parallel via end switches, which may lead to motor damage. The device is designed as a plug-in unit and is mounted on a support rail according to DIN-EN TH35. It features a universal control voltage of 8 to 230 V UC, allowing flexible use in various control systems. The supply voltage is 230 V, and the standby loss is maximum 0.5 W, ensuring energy-efficient operation.
Applications
The MTR12-UC is specifically designed for applications in building technology and automation systems where multiple shading elements or roller shutters are controlled via a central control system. It is used when more than one motor is to be controlled by an EGS12Z-UC or when the control voltage differs from the motor voltage. In such cases, one MTR12-UC is required for every two motors. The disconnect function protects motors from damage caused by back-voltage that may arise from uncontrolled parallel connection.
Functions and Equipment in Detail
The relay features two close contacts (1/2) for motor 1 and two close contacts (3/4) for motor 2, which are not potential-free. The contacts are rated for 5 A/250 V AC, sufficient for controlling standard tube motors. The Up" and "Down functions can be locked or completely deactivated via an integrated rotary switch. This lock affects only the connected motors and allows individual shading elements or roller shutters to be excluded from the automatic function of an overall control system without affecting the entire installation.
Technology Explained Simply
The universal control voltage of 8 to 230 V UC enables flexible integration into various control systems, regardless of the exact voltage of the control source. The supply voltage of 230 V is provided via the network. The contacts are not potential-free, meaning they are directly connected to the motor voltage. The disconnect function ensures that motors are not directly connected in parallel, but are controlled via the relay, thus avoiding back-voltage. The low standby power consumption of 0.5 W reduces energy usage in idle state.
Compatibility and Accessories
The MTR12-UC is compatible with the EGS12Z-UC, a control device for shading systems. When using multiple MTR12-UC devices in an installation, free contact outputs K2/K3 of the controlling EGS12Z-UC must be available. These are connected to terminals K2/K3 of the MTR12-UC to enable control of multiple motors. Parallel operation of multiple MTR12-UC devices is possible as long as the required contacts on the EGS12Z-UC are available.
Mounting and Installation
The device is designed as a plug-in unit and is mounted on a support rail according to DIN-EN TH35. Dimensions are 18 mm width (equivalent to one module width) and 58 mm depth. Mounting is performed on standard installation rails commonly used in electrical installations. The terminals are designed for direct connection to motors and control.
Advantages in Operation
The disconnect function extends the service life of connected motors by avoiding back-voltage. The flexible control via universal control voltage allows easy integration into existing systems. The ability to lock individual motors via the rotary switch provides additional flexibility when using shading systems. The low standby power consumption reduces energy usage in idle state, which is particularly beneficial in larger installations. Mounting on DIN rail enables standardized and quick installation in electrical installations.
Protection Rating and Operating Environment
The device is designed for indoor use and meets requirements for installation technology in buildings. It is not designed for outdoor use, as no specific protection rating such as IP67 is specified.