Elsner 70802, EAN: 4051996708025

Elsner 70802 Cala Touch KNX T black

Elsner 70802 Cala Touch KNX T black

Lieske Part No. 701104
Mfg Part No 70802
EAN-Code 4051996708025
Manufacturer Elsner
Here only 281,81 EUR
335,35 EUR incl. VAT

Further information for Elsner 70802 Cala Touch KNX T black

General
HousingReal glass, plastic
Display visible diagonal2.3" (59 mm)
Display resolution [pixels]320 × 240
Colours (similar)RAL 9010 (white), RAL 9005 (black)
Degree of protectionIP20
Dimensions (W × H × D) mounting ring (W × H) depth55 mm × 55 mm × 35 mm, 71 mm × 71 mm, 7 mm
Weight total≈ 90 g
Ambient temperature0…+45°C / -5…+45°C / -5…+45°C
Ambient air humidity (rH) (non-condensing)5...95 %
Storage temperature25...+70°C
Over voltage categoryIII
Pollution degree2
Inputs
Number4
Contact voltage3.3 V
Contact current0.33 mA
Temperature sensor T-NTC (No. 30516) measurement range at input40...+80°C
Maximum cable length T-NTC / digital inputs3 m / 10 m
KNX bus
MediumTP1-256
Configuration modeS-Mode
Maximum group addresses2000
Maximum assignments2000
Communication objects471 / 433 / 379
Nominal voltage30V DC SELV
Electricity consumption≤ 18mA
Connection KNX plug-in terminal conductor diameter0.8 mm s
Connection KNX plug-in terminal stripping length5 mm
Time until data reception after bus voltage recovery≈ 5 s
Sensors
CO2 measurement range400...5000 ppm
Humidity measurement range5...95 %
Temperature measurement range5…+60°C
The Elsner Cala Touch KNX T 3.x, type 70802, is a room controller with integrated temperature sensor, specifically designed for integration into KNX heating and building automation systems. The device features a colour touch display with a visible diagonal of 2.3 inches (59 mm) and a resolution of 320 × 240 pixels, supporting various display and control pages. The surface consists of real glass and plastic, with a finish in deep black (RAL 9005). The device is designed for indoor use and complies with protection class IP20. The operating ambient temperature ranges from 0 °C to +45 °C, and the storage temperature ranges from 25 °C to +70 °C. The ambient air humidity is 5 to 95 % (non-condensing). The housing has a mounting ring size of 55 mm × 55 mm, a mounting depth of 35 mm, and an overall size of the mounting element of 71 mm × 71 mm. The total weight is approximately 90 g.

Applications

The room controller is used in residential and office buildings where intelligent, central control of room temperature, lighting, shading, and scene functions is required. It serves as a central control and display unit for heating and climate control, with the integrated temperature sensor measuring the current room temperature. The measured values can be combined with external values to determine a mixed value (e.g. room average), which is used for control. The functions include control of heating and cooling via integrated PI controllers, which can operate in single- or two-stage mode. Control is performed according to separate setpoints or a base setpoint. Additionally, fan-coil control for blower convectors is possible.

Functions and equipment in detail

The device offers a variety of control pages accessible via the touch display. These include a page for displaying current measured values, a bus data display with four universal display positions, temperature control with mode switching (heating/cooling), as well as control options for shading, windows (manual movement), light switches (manual switching or dimming, RGB, colour temperature, Human Centric Lighting), scenes (four scenes with call-up, storage, and status display), and a weekly time switch with eight time periods. The integrated weekly time switch enables time-controlled operation of the functions. Additionally, two info pages are available, each displaying two text objects. Device settings can be made via the display, as well as the configuration of the screen saver (clock, clock/indoor temperature/outdoor temperature alternating, off) and the key tone (switchable on and off).

Technology explained simply

The controller is designed for the KNX bus system and operates in TP1-256 mode. Communication takes place via a KNX plug-in terminal, designed for conductors with a diameter of 0.8 mm s and a stripping length of 5 mm. The nominal voltage is 30 V DC SELV, and the maximum current consumption is 18 mA. The maximum number of group addresses and assignments is 2000 each. The communication objects are available in three variants: 471, 433, and 379. After a bus voltage recovery, it takes approximately 5 seconds until data can be received. The integrated logic functions include eight AND and eight OR logic gates, each with four inputs. As inputs, switching events as well as 16 logic inputs in the form of communication objects can be used. The output of each gate can be configured as either 1 bit or 2 × 8 bits. Additionally, eight multifunction modules (calculators) are integrated, which can modify input data through calculations, condition checks, or data point type conversions. Four control value comparators enable the output of minimum, maximum, or average values, with five inputs each available for values received via communication objects. The summer compensation for cooling adjusts the setpoint temperature according to the outdoor temperature, with the characteristic curve defining the minimum and maximum setpoint temperatures.

Compatibility and accessories

The room controller is designed for integration into existing KNX systems and can communicate with other KNX devices. The four inputs support binary contacts or the temperature sensor T-NTC (article number 30516), with the measurement range for the T-NTC sensor between 40 °C and +80 °C. The maximum cable length is 3 m for the T-NTC sensor and 10 m for digital inputs. The integrated temperature sensor measures in the range of 5 °C to +60 °C. Additionally, the device measures CO2 in the range of 400 to 5000 ppm and air humidity in the range of 5 to 95 %. The devices are designed for use in rooms with an overvoltage category III and a pollution degree 2.

Mounting and installation

The device is installed into a suitable switch series, with the frame adapted to the switch series used in the building. Installation is carried out on a standard installation surface, taking into account the mounting depth of 35 mm and the mounting ring size of 55 mm × 55 mm. Installation is performed via the KNX plug-in terminal, designed for connection to the KNX bus. Configuration is done in S-Mode, with settings made via the display.

Advantages in operation

The room controller offers a central, user-friendly interface for various functions such as heating, cooling, lighting, shading, and scenes. The integrated weekly time switch enables automated control, while the logic functions (AND and OR gates, multifunction modules, control value comparators) allow flexible adaptation to specific requirements. The mixed value calculation from internal and external temperature values ensures precise control. The summer compensation optimizes cooling based on outdoor temperature. The display of CO2 and humidity values supports indoor air quality. The devices are designed for indoor use with an ambient temperature of 0 °C to +45 °C and provide stable, reliable performance in everyday operation.

Compatibility and accessories

The room controller is designed for integration into existing KNX systems and can communicate with other KNX devices. The four inputs support binary contacts or the temperature sensor T-NTC (article number 30516), with the measurement range for the T-NTC sensor between 40 °C and +80 °C. The maximum cable length is 3 m for the T-NTC sensor and 10 m for digital inputs. The integrated temperature sensor measures in the range of 5 °C to +60 °C. Additionally, the device measures CO2 in the range of 400 to 5000 ppm and air humidity in the range of 5 to 95 %. The devices are designed for use in rooms with an overvoltage category III and a pollution degree 2.

Mounting and installation

The device is installed into a suitable switch series, with the frame adapted to the switch series used in the building. Installation is carried out on a standard installation surface, taking into account the mounting depth of 35 mm and the mounting ring size of 55 mm × 55 mm. Installation is performed via the KNX plug-in terminal, designed for connection to the KNX bus. Configuration is done in S-Mode, with settings made via the display.

Advantages in operation

The room controller offers a central, user-friendly interface for various functions such as heating, cooling, lighting, shading, and scenes. The integrated weekly time switch enables automated control, while the logic functions (AND and OR gates, multifunction modules, control value comparators) allow flexible adaptation to specific requirements. The mixed value calculation from internal and external temperature values ensures precise control. The summer compensation optimizes cooling based on outdoor temperature. The display of CO2 and humidity values supports indoor air quality. The devices are designed for indoor use with an ambient temperature of 0 °C to +45 °C and provide stable, reliable performance in everyday operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/701104
qrcode für Elsner 70802 Cala Touch KNX T black