Further information for Dold 0063811 semiconductor contactor AC24-110V AC40A
Technical data
Load current up to
40 A
Load voltage up to
AC 480 V
Number of poles
1-pole
On/Off Input Control
DC
Width
45 mm
Type
PH 9270
Signalling output
Variant
Auxiliary voltage
DC 24 V
Load current
AC 40 A
Load voltage
AC 24 - 110 V
Semiconductor output
1-pole
Variant
Switching at zero crossing. With over current monitoring and PNP transistor output with de-energized on trip. With heat sink
The Dold semiconductor contactor PH9270.91/002/02 AC24-110V AC40A is a 1-pole AC semiconductor relay designed for wear-free and noiseless switching as well as monitoring of loads in industrial applications. It is particularly suitable for use in machines and plants in the plastics and rubber industry, packaging industry, soldering systems, and the food industry. The device operates on the zero-voltage switching principle, whereby switching operations occur at the zero crossing of the sinusoidal mains voltage, reducing stress on the load and the device. Control is via a digital DC interface with an auxiliary voltage of DC 24 V.
Applications
This semiconductor contactor is intended for frequent operation with heaters, motors, valves, and lighting systems. The integrated load circuit monitoring enables early detection of faults such as load circuit interruption, over- or under-current, missing load voltage, fuse failure, or thyristor faults. For overcurrent monitoring, a start-up bypass time must be provided in the control system to avoid misinterpreting the inrush current of motors or other inductive loads as a fault.
Functions and Features in Detail
The device features a PNP semiconductor alarm output operating on the rest current principle, which activates when a fault is detected. Status indication is provided by a dual-color LED: the LED A1/A5,1 cm ( 2 inch ) indicates the status of the control input (yellow = activated, off = not activated), while the LED "Alarm indicates the device status (green = no fault, red = fault, off = no auxiliary voltage). Monitoring is continuous as soon as the auxiliary voltage (A3+/A2) is applied.
Technology Explained Simply
The semiconductor contactor is based on two antiparallel-connected thyristors responsible for the switching function. The DCB technology (Direct-Copper-Bonding process) ensures optimal heat dissipation, increasing service life and reliability. The device is equipped with a heatsink that can be snapped onto a DIN rail, making it ready for immediate use. The width is 45 mm, enabling compact installation in enclosures. The load voltage range is AC 24–110 V, and the load current is AC 40 A, with a maximum load voltage up to AC 480 V and a maximum load current up to 40 A. The standard IEC/EN 60947-4-3 is complied with.
Compatibility and Accessories
The device is designed for use with PLC-compatible alarm outputs. Optionally, a temperature limit switch (normally open) can be inserted into the designated slot at the bottom to monitor the heatsink temperature. A suitable switch is the UCHIYA type UP62–100, which opens when the heatsink temperature exceeds 100 °C. The terminal connections are clearly labeled: A1+/A2 for the control input, A3+/A2 for the operating voltage and load circuit monitoring, Alarm for the semiconductor alarm output, L1 for the mains connection, and T1 for the load output.
Mounting and Installation
Mounting is done on a DIN rail, with the device snapping directly onto the integrated heatsink. Installation must be carried out exclusively by a qualified electrician. The shock protection class is IP 20, requiring use in enclosed enclosures.
Operational Advantages
The semiconductor contactor provides wear-free operation without mechanical contacts, increasing service life and extending maintenance intervals. The integrated load circuit monitoring enables rapid fault detection and indication, minimizing downtime. Zero-voltage switching reduces electrical interference and load stress. The combination of DCB technology and heatsink ensures efficient heat dissipation, enhancing reliability under load conditions. The PLC-compatible interface simplifies integration into existing control systems.