Dold 0061398, EAN: 4030641613983

Dold 0061398 voltage relay AC50-500mV

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0061398 voltage relay AC50-500mV

Lieske Part No. 330275
Mfg Part No 0061398
EAN-Code 4030641613983
Manufacturer Dold
Here only 335,41 EUR
399,14 EUR incl. VAT

Further information for Dold 0061398 voltage relay AC50-500mV

Technical data
1- / 3-phase1
Enclosure designSwitch cabinet
Nominal voltage max.AC 1000 V, DC 900 V
Output contacts2 C/O contacts
Width45 mm
TypeBA 9054
Operate delayYes
Variant
Auxiliary voltageAC/DC 80 - 230 V
Contact equipping2 changeover contacts
Measuring rangeAC 50 - 500 mV
Start up delayWithout
Switching delay0 - 20 s
Approvals and MarkingsUKCA, CCC
VariantUndervoltage relay. De-energized on trip. Time delay at hysteresis value
The voltage relay BA9054/012 from Dold is an industrial device for monitoring single-phase DC and AC voltage networks. It is used for continuous monitoring of the network voltage to detect deviations from the setpoint early and thus prevent failures in electrical systems. The device operates on the principle of rest current and is configured as an undervoltage relay, with the switching delay activated upon reaching the hysteresis value. Adjustment is performed via rotary switches on the front of the device, enabling simple and user-friendly parameterization.

Applications
This relay is intended for use in industrial and railway applications where high operational safety and reliability of electrical systems are required. It monitors DC and AC voltages in the range of AC 50 to 500 mV, making it suitable for applications with very low voltage values, for example in control and regulation circuits. The galvanic isolation between auxiliary circuit and measurement circuit ensures safe and interference-free measurement, even in electrically demanding environments.

Functions and Equipment in Detail
The device features two changeover contacts, which can be used for controlling auxiliary circuits or warning signals. The auxiliary voltage is AC/DC 80 to 230 V, enabling flexible integration into existing power supply systems. The switching delay can be set between 0 and 20 seconds to avoid unwanted switching operations during short-term voltage fluctuations. The pickup delay is also integrated to ensure stable response to voltage changes.

Technology Explained Simply
The relay measures the arithmetic mean of the rectified measurement voltage. For AC voltages, the device is calibrated to the RMS value, enabling precise measurement even with sinusoidal voltages. The hysteresis, i.e., the difference between pickup and drop-out value, depends on the set pickup value and ensures that the relay does not switch uncontrollably due to minor fluctuations around the setpoint. The LED indicators (green for operational readiness, yellow for activated output relay) allow visual monitoring of the operating status.

Compatibility and Accessories
The relay is compliant with standards IEC/EN 60255-1 and IEC/EN 60947-1 and carries the certifications UKCA and CCC. It is designed for a maximum rated voltage of AC 1000 V and DC 900 V, with the measurement voltage in the range of AC 50–500 mV. The width is 45 mm, enabling installation in standard enclosures. The connection terminals are clearly labeled: A1/A2 for auxiliary voltage, e/f for voltage input, and contacts 11/12/14 and 21/22/24 for the two changeover contacts.

Mounting and Installation
Mounting is done in an enclosure, with the width of 45 mm allowing standard installation on DIN rails. The terminals are designed for secure connections, and the front view with rotary switches allows direct on-site adjustment. The galvanic isolation between measurement and auxiliary circuit reduces the risk of interference and increases safety.

Advantages in Operation
By detecting voltage deviations early, the relay supports preventive maintenance and prevents damage to connected devices. The precise and reliable measurement ensures high operational safety, while the LED indicators enable quick fault localization. The switching delay prevents unnecessary switching operations during short-term voltage fluctuations, increasing the service life of connected components.

Certifications and Markings
The device carries the certifications UKCA and CCC, confirming compliance with applicable safety and quality standards in the respective markets. The standards IEC/EN 60255-1 and IEC/EN 60947-1 ensure reliability and safety of the device in industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/330275
qrcode für Dold 0061398 voltage relay AC50-500mV