Dold 0060929, EAN: 4030641609290

Dold 0060929 semiconductor contactor AC200-480V AC40A

Dold 0060929 semiconductor contactor AC200-480V AC40A

Lieske Part No. 1001627
Mfg Part No 0060929
EAN-Code 4030641609290
Manufacturer Dold
Here only 213,73 EUR
254,34 EUR incl. VAT

Further information for Dold 0060929 semiconductor contactor AC200-480V AC40A

Technical data
Load current up to40 A
Load voltage up toAC 480 V
Number of poles1-pole
On/Off Input ControlDC
Width45 mm
TypePH 9270
Signalling outputYes
Variant
Auxiliary voltageDC 24 V
Load currentAC 40 A
Load voltageAC 200 - 480 V
Semiconductor output1-pole
VariantSwitching at zero crossing. With heigh I2t-value. Control via A1/A2 with under current monitoring and PNP transistor output with de-energized on trip. With heat sink
The Dold PH9270.91/101/02 AC200-480V AC40A is an AC semiconductor relay/contactor designed for wear-free and noiseless switching as well as monitoring of loads in industrial applications. It is particularly suitable for use in machines and plants in the plastics and rubber industry, packaging industry, food processing, and soldering systems. The device features integrated load circuit monitoring and enables continuous monitoring of load voltage and load current to detect faults such as interruptions in the load circuit, over- or under-current, defective thyristors, or missing supply voltage at an early stage.

Applications
This semiconductor relay is frequently used for controlling and monitoring heating elements, motors, valves, and lighting systems. The zero-voltage switching ensures that the load circuit is activated at the next zero crossing of the sinusoidal supply voltage, reducing stress on the load and the device. For motors, a start-up bypass time must be considered in the control system if overcurrent monitoring is activated. The integrated load circuit monitoring enables rapid fault detection, for example, in cases of partial load faults, fuse failure, or thyristor defects.

Functions and Features in Detail
The device is designed as a zero-voltage switch and features two antiparallel-connected thyristors. Control is achieved via terminals A1/A2 with an auxiliary voltage of DC 24 V. The load circuit operates with a load voltage of AC 200–480 V and a load current of up to 40 A. Monitoring is performed via a PNP semiconductor alarm output operating on the idle current principle, which activates when a fault is detected. Fault conditions are indicated by a two-color LED display: green indicates no fault, red indicates a fault, and off indicates that no auxiliary voltage is present.

Technology Explained Simply
The DCB technology (Direct-Copper-Bonding process) ensures optimal heat dissipation and increases the device’s service life. The width is 45 mm, enabling compact mounting on a DIN rail. The device is equipped with a heatsink that improves heat dissipation and enhances operational reliability. The integrated load circuit monitoring continuously monitors load current and load voltage and detects deviations from the set load current value. In the event of a fault, the alarm output is activated to inform the control system.

Compatibility and Accessories
The semiconductor relay is compliant with IEC/EN 60947-4-3 and suitable for use in industrial control systems. The alarm output is PLC-compatible and can be integrated into existing control systems. Optionally, a temperature limit switch (normally open) can be inserted into the designated slot on the underside of the device to activate an over-temperature protection function. A suitable switch is, for example, the UCHIYA type UP62–100, which opens at a heatsink temperature above 100 °C.

Mounting and Installation
Mounting is done on a DIN rail, with the device equipped with a snap-on heatsink. Installation must only be carried out by a qualified electrician. Terminal designations are clearly defined: A1/A2 for control input, A3+/A2 for operating voltage and load circuit monitoring, and Alarm for the semiconductor alarm output. Connections L1 and T1 are for supply and load connection.

Operational Advantages
The device offers wear-free operation without mechanical contacts, increasing service life and reducing maintenance requirements. The zero-voltage switching minimizes electrical stress and extends the life of the load. The integrated load circuit monitoring enables reliable fault detection and indication, minimizing downtime. The combination of high I2t value and DCB technology ensures robust and reliable performance under high loads.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001627
qrcode für Dold 0060929 semiconductor contactor AC200-480V AC40A