Dold 0055515, EAN: 4030641555153

Dold 0055515 residual current monitor SL5882.38AC/DC24-230Vtv=5S

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0055515 residual current monitor SL5882.38AC/DC24-230Vtv=5S

Lieske Part No. 980810
Mfg Part No 0055515
EAN-Code 4030641555153
Manufacturer Dold
Here only 312,66 EUR
372,07 EUR incl. VAT

Further information for Dold 0055515 residual current monitor SL5882.38AC/DC24-230Vtv=5S

Technical data
Adjustable measuring ranges0,01 - 10 A, 0,01 - 30 A
ClassificationType A (AC, DC pulsating)
Enclosure designSwitch cabinet
Type of voltageAC, DC pulsating
Width35 mm
TypeSL 5882
Broken conductor detectionYes
Clear keyYes
Operate delayYes
Relay contact / outputYes
Test keyYes
Variant
Auxiliary voltageAC/DC 24 - 230 V
Contact equipping1 changeover contact for prewarning, 1 changeover contact for alarm
Measuring range10 A
Time delay5 s
Approvals and MarkingsUKCA
The Dold differential current monitor SL5882.38AC/DC24-230Vtv=5S is a device for monitoring electrical installations in earthed networks. It is used for the early detection of insulation faults to ensure preventive system and fire protection, without causing an immediate operational interruption upon fault detection. The device is part of the VARIMETER RCM series and is suitable for continuous monitoring and preventive maintenance of electrical systems in industrial and enclosure applications.

Applications

The differential current monitor is used in earthed electrical networks to detect insulation degradation at an early stage. It is suitable for installations where immediate shutdown upon fault detection is not required, and instead, a visual or signaling indication is sufficient to alert maintenance personnel. Typical applications include industrial enclosures, production systems, building automation, and other systems where high availability is required.

Functions and Equipment in Detail

The device features two relay contacts: one changeover contact for pre-warning and one changeover contact for alarm. These enable a differentiated response to different fault levels. The pre-warning is triggered at a lower threshold, while the alarm is activated at a higher threshold. Indication is provided via LED indicators: a green LED indicates the presence of auxiliary voltage, while red LEDs signal pre-warning and alarm. A test button allows functional testing, and a reset button is used to reset the device after an alarm. The threshold settings are adjusted via rotary switches, which are protected against unauthorized changes by a sealable transparent cover.

Technology Explained Simply

The differential current monitor operates on the residual current principle, where the output relay is not activated in the event of a fault, but only an indication is provided. Measurement is performed via an external differential current transformer connected to terminals i and k. All conductors of the monitored network (excluding PE) are passed through the transformer. In a fault-free condition, the sum of all currents is zero, so no voltage is induced in the transformer. In the event of an insulation fault, a fault current flows to earth, creating a current difference that is detected by the transformer and evaluated by the device. The wire break detection ensures that an interruption in the sensor circuit is recognized to prevent malfunction.

Compatibility and Accessories

The device is designed for connection to external differential current transformers, for example, models ND 5016, ND 5019, or the hinged current transformer ND 5014. The measurement ranges are adjustable and include values from 0.01 to 10 A and from 0.01 to 30 A. The time delay is fixed at 5 seconds and can be used to avoid flickering with pulsating fault currents. The auxiliary voltage can be operated in the range of AC/DC 24 to 230 V.

Mounting and Installation

The differential current monitor SL5882 is designed for mounting in enclosures. It has a mounting width of 35 mm and a mounting depth of 100 mm. The connection terminals are located at the top, which facilitates installation in enclosures with mounting plates and cable ducts. Installation guidelines comply with requirements for enclosure systems.

Operational Advantages

Early detection of insulation faults increases system availability and reduces the risk of fires. The optional storage of the alarm value enables subsequent analysis. The short response time and wire break detection ensure reliable operation. Compliance with IEC/EN 62020 and classification as Type A for alternating and pulsating direct currents according to IEC/TR 60755 ensures technical reliability. The UKCA approval confirms conformity with applicable European requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/980810
qrcode für Dold 0055515 residual current monitor SL5882.38AC/DC24-230Vtv=5S