Dold 0053210, EAN: 4030641532109

Dold 0053210 current relay BA9053/410 AC230V

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0053210 current relay BA9053/410 AC230V

Lieske Part No. 1312714
Mfg Part No 0053210
EAN-Code 4030641532109
Manufacturer Dold
Here only 279,93 EUR
333,12 EUR incl. VAT

Further information for Dold 0053210 current relay BA9053/410 AC230V

Technical data
1- / 3-phase1
Enclosure designSwitch cabinet
Output contacts2 C/O contacts
Width45 mm
TypeBA 9053
Operate delayYes
Variant
Auxiliary voltageAC 230 V
Contact equipping1 changeover contact
Measuring rangeAC 1 A/ 5 A/ 10 A
Start up delayWithout
Switching delay0 - 20 s
Approvals and MarkingsUKCA, CCC
VariantOvercurrent relay. Energized on trip. Time delay at response value. With 3 current ranges. 1 C/O contact
The Dold current relay BA9053/410 is an overcurrent relay of the VARIMETER series, designed for monitoring single-phase DC and AC power networks. It is used for continuous monitoring of the current consumption of electrical loads to react promptly to deviations from the setpoint. Device settings are adjusted via rotary switches on the front panel, ensuring simple and user-friendly configuration. The relay operates on the operating current principle and is suitable for use in industrial and railway applications. It detects overloads, enabling preventive maintenance to avoid electrical system failures and enhance operational safety.

Applications
This relay is intended for use in industrial plants, machine controls, and railway systems where reliable current monitoring is required. It monitors the current consumption of motors, transformers, or other loads to prevent damage caused by overloading or interruptions. The device is installed in enclosures, with a width of 45 mm allowing compact mounting in standard control panels.

Functions and Features in Detail
The device offers three measurement ranges for AC current: 1 A, 5 A, and 10 A. Measurement is performed using the arithmetic mean of the rectified measurement current, with the devices calibrated for sinusoidal AC currents in RMS value. The pickup value and hysteresis are adjusted via rotary switches on the front of the device. The hysteresis depends on the set pickup value. The relay can be used as an overcurrent relay or an undercurrent relay, with switching delay activated when the set value is exceeded. The switching delay ranges from 0 to 20 seconds. The start-up bypass feature is not available in this variant.

Technology Explained Simply
Measurement is performed via an internal shunt resistor, which is dimensioned differently depending on the measurement range. The auxiliary voltage is AC 230 V, allowing the device to operate in standard low-voltage networks. The auxiliary circuit is galvanically separated from the measurement circuit, ensuring safe isolation between the measurement and control circuits. The measurement frequency can reach up to 5 kHz, enabling accurate detection of rapidly changing currents. The devices comply with IEC/EN 60255-1 and IEC/EN 60947-1.

Compatibility and Accessories
The relay is designed for use in single-phase systems. It features two changeover contacts (11-14 and 21-24), which can be used to control auxiliary circuits or alarm systems. Terminal markings follow A1/A2 for auxiliary voltage, i/k for current input, and 11-14 and 21-24 for output contacts. LED indicators (green for operational readiness, yellow for activated output relay) provide visual status indication.

Mounting and Installation
Mounting is performed in enclosures using screw fastening. The width of 45 mm corresponds to the standard for DIN rail mounting. Connection terminals are clearly labeled, ensuring error-free wiring. The devices are designed for maximum overload capacity, with maximum permissible currents varying according to the measurement range.

Operational Advantages
By detecting current deviations early, the relay enables preventive maintenance, minimizing downtime and increasing productivity. The LED indicators support rapid fault localization. The galvanic separation between the measurement and auxiliary circuits enhances operational safety. Compliance with standards IEC/EN 60255-1 and IEC/EN 60947-1, along with UKCA and CCC certifications, ensures suitability for various markets. The switching delay of 0 to 20 seconds allows for adjusted response to short-term current surges without triggering unnecessary shutdowns.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1312714
qrcode für Dold 0053210 current relay BA9053/410 AC230V