Dold 0052577, EAN: 4030641525774

Dold 0052577 BH9251.11AC230V50/60HZ20A semiconductor contactor 20A

Industrial Material > Industrial relays and contactors > Contactors

Dold 0052577 BH9251.11AC230V50/60HZ20A semiconductor contactor 20A

Lieske Part No. 760149
Mfg Part No 0052577
EAN-Code 4030641525774
Manufacturer Dold
Here only 481,64 EUR
573,15 EUR incl. VAT

Further information for Dold 0052577 BH9251.11AC230V50/60HZ20A semiconductor contactor 20A

Technical data
Load current up to40 A
Load voltage up toAC 400 V
Number of poles1-pole
On/Off Input ControlAC/DC
Width45 mm, 67,5 mm, 112,5 mm
TypeBH 9251
Signalling outputYes
Temperature monitoringYes
Variant
Contact equipping1 changeover contact
Load current20 A
Nominal voltageAC 230 V
The Dold semiconductor contactor BH9251.11AC230V50/60HZ20A is an electronic switching device for controlling and monitoring single-phase AC loads up to 400 V. It is specifically designed for use in industrial machines such as packaging machines, plastic injection moulding machines, or blister packaging machines, where continuous monitoring of heating cartridges is required. The device switches loads with a rated current of 20 A at a rated voltage of AC 230 V and supports load currents up to 40 A. The width is 67.5 mm, enabling mounting on DIN rail. Control is achieved via a galvanically isolated control input X1-X2, which accepts voltages in the range AC/DC 9.6 to 270 V. Control is performed without auxiliary voltage, simplifying installation.

Applications
This contactor is designed for use in systems with parallel arrangement of heating cartridges, where up to 12 heating cartridges can be connected. At a load voltage of AC 230 V, the maximum total power of the connected heating cartridges is 4600 W, with each individual cartridge having a power of up to 380 W. The application is in continuously operating machines where high reliability and precise current monitoring are required. The devices are designed for use in environments with an operating temperature of 0 to +40 °C, with the maximum device temperature being 60 °C; if exceeded, the load current is reduced.

Functions and Equipment in Detail
The device features integrated current monitoring, detecting undercurrent, overcurrent, and interruptions in the load circuit. Temperature monitoring protects the power semiconductor from overheating. In the event of a fault, the output relay is deactivated according to the zero-current principle to prevent incorrect control. An alarm relay with 1 changeover contact serves as a signal output for fault indications. The current pickup value is adjustable continuously within the measurement range. The evaluation time is maximum 100 ms, enabling a rapid response to load changes. The LEDs serve as status indicators, signaling whether the mains voltage is present and whether the setpoint and load current match.

Technology Explained Simply
The contactor operates according to the zero-voltage switching principle, ensuring switching operations occur at voltage zero crossings to minimize arcing and interference. Compensation for voltage fluctuations of ±20 % ensures stable operation even with irregular mains voltage. The load voltage is AC 230 V ±20 %, and the blocking voltage is 1200 Vp. Switching delay is limited to under 100 ms. The integrated heatsink ensures efficient heat dissipation. The electrical life expectancy is at least 200,000 switching operations at 3 A and AC 230 V, and the mechanical life expectancy is at least 1,000,000 switching operations.

Compatibility and Accessories
The device is designed for mounting on DIN rail and can be used in enclosures with standard widths of 45 mm, 67.5 mm, and 112.5 mm. Compatibility with other devices is ensured by standards IEC/EN 60947-1 and IEC/EN 60947-4-2. Maximum short-circuit withstand is achieved with a maximum fuse rating of 4 A gG/gL. Creepage and clearance distances correspond to pollution degree 2 with a rated impulse withstand voltage of 4 kV.

Mounting and Installation
Mounting is done by clipping onto a DIN rail. The connection terminals are designed for connection with cables. Control is via input X1-X2, with a pulse duration of at least 100 ms required. The terminal assignment is detailed in the datasheet. Installation is to be carried out in a closed enclosure, with the operating altitude below 2000 m.

Advantages in Operation
The contactor offers high reliability through integrated current and temperature monitoring. Galvanic isolation of the control input increases safety. Fault tolerance through voltage fluctuation compensation and fast response time ensures stable operation. LED indicators enable quick diagnosis of operating status. Mounting on DIN rail and compact design facilitate integration into existing systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/760149
qrcode für Dold 0052577 BH9251.11AC230V50/60HZ20A semiconductor contactor 20A