Dold 0050642, EAN: 4030641506421

Dold 0050642 temperature monitor BA9094.28/100AC230VP1=20-100C

Industrial Material > Industrial relays and contactors > Switching units / measuring, control relay

Dold 0050642 temperature monitor BA9094.28/100AC230VP1=20-100C

Lieske Part No. 725107
Mfg Part No 0050642
EAN-Code 4030641506421
Manufacturer Dold
Here only 330,27 EUR
393,02 EUR incl. VAT

Further information for Dold 0050642 temperature monitor BA9094.28/100AC230VP1=20-100C

Technical data
ClassificationTemperaturüberwachung
Enclosure designSwitch cabinet
Measuring range max.100 °C
Output contacts1 C/O contact, 1 NO contact
Width45 mm
TypeBA 9094
Variant
Auxiliary voltageAC 230 V
Contact equipping1 changeover contact for P1, 1 NO contact for P2
Response value / Reset value P1only response value
Response value / Reset value P2only response value
Response value P1 = P220 - 100 C
Variant1 PT 100 input. 2 outputs. Seperate adjustable response and release value for every output
The temperature monitor BA9094.28/100AC230VP1=20-100C from Dold is an industrial monitoring relay of the VARIMETER series, specifically designed for temperature monitoring in applications such as motors, ball bearings, or rooms. The auxiliary voltage is AC 230 V, and the device is designed for use in enclosures. The width of 45 mm allows for compact mounting in standard control panels.

Applications
The temperature monitor is used for continuous temperature monitoring in industrial applications, particularly in motors, bearings, or rooms where overheating must be prevented. The 2-wire technology and wire break detection ensure that a reaction occurs even if the sensor is defective or the wire is broken. This function is especially important in systems where temperature exceedance can lead to damage or failure.

Functions and equipment in detail
The device features a PT100 input, connected to a resistance thermometer. The setpoint values are adjustable in the range of 20 °C to 100 °C, with the hysteresis (reset value) lying between 85 % and 95 % of the setpoint. The output contacts consist of a changeover contact for the first output (P1) and a normally closed contact for the second output (P2). When the setpoint is exceeded or a wire break occurs, the output relay drops out, which corresponds to the de-energized operation principle. The LED indicators (red and green) signal the operating status.

Technology explained simply
The wire break detection recognizes when the sensor wire is interrupted and triggers a reaction as well. The device operates on the de-energized operation principle, where the output relays are activated in the normal state and drop out in case of a fault (over-temperature or wire break). The auxiliary voltage of AC 230 V is supplied via terminals A1 and A2.

Compatibility and accessories
The device is designed for PT100 sensors, which are common in industrial applications. It can be operated with a single PT100 sensor, where two separate switching points (P1 and P2) can be defined. The settings for setpoint and reset value are independent of each other, enabling flexible use. The standard IEC/EN 60255-1 is complied with, ensuring reliability and safety in industrial use.

Mounting and installation
The temperature monitor is mounted in enclosures and requires a width of 45 mm. Connections are made via terminals: A1 and A2 for auxiliary voltage, P0, P1, P2 for PT100 sensors, and contacts 11-12, 14, 23-24 for outputs. The device is designed for continuous operation and is rated for operating temperatures from -20 °C to +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level.

Advantages in operation
The separate adjustment of setpoint and reset values for each output enables precise control of switching operations. The wire break detection increases safety, as a reaction occurs even if the sensor is defective. The high mechanical life of over 30 million switching operations and the electrical life of over 100,000 switching operations at 5 A and AC 230 V ensure a long service life. The EMC testing according to IEC/EN 61000-4-2 to -4-6 ensures immunity against electromagnetic interference.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/725107
qrcode für Dold 0050642 temperature monitor BA9094.28/100AC230VP1=20-100C