Dold 0044940, EAN: 4030641449407

Dold 0044940 time relay delayed return

Dold 0044940 time relay delayed return

Lieske Part No. 1154024
Mfg Part No 0044940
EAN-Code 4030641449407
Manufacturer Dold
Here only 123,75 EUR
147,26 EUR incl. VAT

Further information for Dold 0044940 time relay delayed return

Technical data
Enclosure designSwitch cabinet
Output contacts2 C/O contacts
Time function(s)Off-delay, with control signal
Width22,5 mm
TypeMK 9962
Variant
Contact equipping2 changeover contacts delayed
Nominal voltageAC/DC 24 V + AC 220 - 240 V
Time range3 - 60 min
VariantRelease delay, with control signal
The Dold MK9962 is a delayed-release time relay with control signal, designed for use in industrial enclosures. It features a dual-voltage configuration with rated voltages AC/DC 24 V and AC 220–240 V, enabling flexible integration into various systems. The time function is implemented as delayed release, meaning the relay energizes upon activation of the control signal and closes the output contacts. Once the control signal is removed, a time-controlled reset begins, which can be adjusted via a continuously variable rotary switch in the range of 3 to 60 minutes. Adjustment is made on an absolute scale, allowing precise and repeatable setting of the delay time.

Delayed release is the core function of the device: the output contacts remain closed until the set delay time has elapsed. This enables time-controlled sequences in automation systems, for example, for controlled motor shutdown or signal delay in controls. The repeatability is ≤ ±1 % of the set value, ensuring high precision in repeated switching operations. The minimum switching-on time is 20 ms, and the re-readiness time is approximately 5 ms, suitable for fast sequential switching operations.

Technology explained simply: The device is actuated via potential-free contacts at control inputs B1–B2. These are electrically connected to the operating voltage terminals A1–A2–A3, which is why galvanic isolation is required to ensure safe actuation. The operating voltage is connected at terminals A1–A2–A3, with voltage supplied at A3–A2 (for DC/AC 24 V) and at A1–A2 (for AC 220–240 V). The output contacts consist of two changeover contacts (C/O contacts) made of silver-tin oxide (AgSnO₂), ensuring high switching durability and corrosion resistance. The rated operating voltage is AC 250 V, and the thermal current (Ith) is 5 A.

Applications: The relay is suitable for time-dependent controls in industrial plants, for example, in conveyor technology, machine building, or building technology. It can be used for delaying switching operations, signal delay, or actuating auxiliary devices. The operating temperature range is from -20 °C to +60 °C, and the storage temperature range matches the operating temperature range. The operating altitude is limited to a maximum of 2000 m above sea level.

Functions and equipment in detail: The device features two LED indicators: the upper LED lights up when the control contact is closed, and the lower LED indicates the state of the output relay. This enables simple fault diagnosis, as the operating state can be visually monitored. The contact configuration includes two changeover contacts designed for switching operations with a switching capacity according to AC 15: normally open contacts (1 A / AC 230 V) and normally closed contacts (3 A / AC 230 V). The electrical life is at least 500,000 switching cycles at 5 A and AC 230 V, and the mechanical life is 30 million switching cycles. The permissible switching frequency is 6000 switching cycles per hour.

Compatibility and accessories: The relay is designed for use in enclosures and has a width of 22.5 mm, making it suitable for standard DIN rails. It complies with the standard EN 61812-1 for time relays. The insulation test voltage is 2.5 kV for a duration of 1 minute. The overvoltage category is III, and the rated impulse voltage is 4 kV at pollution degree 2. EMC requirements are met according to IEC/EN 61000-4-2 to -4-5, including immunity to electrostatic discharge (8 kV), high-frequency radiation, and fast transients (2 kV). The voltage influence limit is ≤ ±0.5 %, and the temperature influence is < ±0.1 % per Kelvin.

Operational advantages: The continuously variable adjustment of the delay time via a rotary switch allows precise adaptation to specific requirements. The LED indicators simplify maintenance and diagnosis, as the operating state is directly visible. The high repeatability and long service life ensure reliable operation in demanding industrial environments. The device is designed for continuous operation and can be operated in a temperature range from -20 °C to +60 °C.

Mounting and installation: The relay is mounted in enclosures and attached to a DIN rail. The connection terminals are clearly labeled: A1–A2–A3 for operating voltage, B1–B2 for control input, and 15–16–18 as well as 25–26–28 for output contacts. Actuation is via potential-free contacts, with galvanic isolation required between control input and operating voltage. Mounting is tool-free, as the device is designed for DIN rails.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1154024
qrcode für Dold 0044940 time relay delayed return