Dold 0044201, EAN: 4030641442019

Dold 0044201 safety relay BD5987.03/001AC50/60HZ24V

Industrial Material > Industrial relays and contactors > Safety relay

Dold 0044201 safety relay BD5987.03/001AC50/60HZ24V

Lieske Part No. 215587
Mfg Part No 0044201
EAN-Code 4030641442019
Manufacturer Dold
Here only 388,69 EUR
462,54 EUR incl. VAT

Further information for Dold 0044201 safety relay BD5987.03/001AC50/60HZ24V

Technical data
1- / 2-channel1, 2
ApprovalsUL-Recognized
Cat. / PL acc. to EN ISO 13849-14/e
ConnectionScrew terminals
Output contacts max.2 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.10 A
Width45 mm
TypeBD 5987
Cross fault detectionYes
Suited as safety gate monitorYes
Variant
Contact equipping2 NO contacts, 1 signal contact
Nominal voltageAC 24 V 50/60 Hz
Approvals and MarkingsTÜV
VariantWith 2 NO contacts, 1 signalling contact AC/DC 0,1 ... 1 A / 10 ...120 V
The Dold safety relay BD5987.03/001AC50/60HZ24V is an emergency stop module for use in safety-oriented systems. It is designed for the safe interruption of control circuits, particularly in conjunction with emergency stop buttons and safety doors, to protect personnel and machinery. The device is designed for use in industrial environments and meets the requirements for safe control systems according to international standards. It features a 2-channel wiring option and can also be operated in a 1-channel configuration, with functions such as cross-short detection and automatic enable function being selectable depending on the variant.

Applications

The BD5987.03/001AC50/60HZ24V is specifically designed for applications in industrial safety technology. It is commonly used in machine controls, systems with emergency stop functions, and as a safety door monitor. Compliance with standards EN ISO 13849-1 (Category 4, PL e) and IEC/EN 62061 (SIL 3) makes it suitable for critical safety functions where high availability and reliability are required. The approval as an electronic safety circuit according to EN 81-20, section 5.11.2.2, allows use in elevator systems, with the specific variant BD5987.02/301 designated for this purpose. The emergency stop function is ensured by the safe interruption of the control circuit upon activation of an emergency stop button.

Functions and Equipment in Detail

The device features 2 normally closed contacts as output contacts, rated for AC 24 V 50/60 Hz. The contacts are gold-plated, enabling reliable switching even under light loads, for example for signals to a PLC. An additional alarm contact serves for status indication. The cross-short detection in the emergency stop control circuit detects faults such as short circuits between channels, thus preventing false tripping. The LED indicators for Channel 1, Channel 2, and mains voltage enable visual monitoring of the operating status. The connection technology uses screw terminals, suitable for wires with cross-sections up to 2.5 mm², with the option to use sleeves and plastic collars according to DIN 46 228-1/-2/-3/-4.

Technology Explained Simply

The safety function of the BD5987.03/001AC50/60HZ24V is based on the safe interruption of the circuit upon activation of an emergency stop button. The integrated cross-short detection checks the integrity of the wiring and prevents a short circuit between channels from causing a false trip. The SIL 3 approval according to IEC/EN 62061 means the device is suitable for safety functions with very high requirements for fault rate. The Category 4 / PL e according to EN ISO 13849-1 guarantees high safety performance, especially when used in systems with multiple safety functions. The thermal current Ith max. of 10 A defines the maximum current load the device can withstand continuously without thermal damage.

Compatibility and Accessories

The device is designed for use in industrial safety systems and can be combined with emergency stop buttons, safety doors, and other safety-oriented components. The 1- or 2-channel wiring enables flexible integration into existing control systems. The approval as a safety door monitor allows use in systems where the door position must be monitored safely. The UL-Recognized approval indicates recognition by UL (Underwriters Laboratories), which may be relevant for use in certain markets. The TUV approval confirms compliance with European safety requirements.

Mounting and Installation

Mounting is done in a standard 35 mm control box, with a width of 45 mm allowing placement in typical control panels. The connection terminals are designed for wires up to 2.5 mm², with the use of sleeves and plastic collars according to DIN 46 228-1/-2/-3/-4 recommended. Installation requires compliance with electrical safety regulations and correct wiring of safety circuits. The LED indicators facilitate commissioning and fault diagnosis.

Operational Advantages

The safe interruption of the control circuit upon activation of an emergency stop button ensures a fast and reliable response. The cross-short detection increases reliability by detecting faults in the control circuit and preventing them from causing false trips. The gold-plated contacts ensure stable switching even under low loads, facilitating integration into control systems with signal transmission. The LED indicators allow quick visual monitoring of the operating status, simplifying maintenance and troubleshooting. The approvals according to EN ISO 13849-1 and IEC/EN 62061 guarantee suitability for critical safety applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/215587
qrcode für Dold 0044201 safety relay BD5987.03/001AC50/60HZ24V