Dold 0041510, EAN: 4030641415105

Dold 0041510 safety relay BO5988.47/124 DC24V+AC230V

Industrial Material > Industrial relays and contactors > Safety relay

Dold 0041510 safety relay BO5988.47/124 DC24V+AC230V

Lieske Part No. 1312984
Mfg Part No 0041510
EAN-Code 4030641415105
Manufacturer Dold
Here only 607,40 EUR
722,81 EUR incl. VAT

Further information for Dold 0041510 safety relay BO5988.47/124 DC24V+AC230V

Technical data
1- / 2-channel1, 2
ApprovalsUL-Recognized
Cat. / PL acc. to EN ISO 13849-14/e
ConnectionPluggable screw terminals
Output contacts max.1 NC contact, 6 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.10 A
Width100 mm
TypeBO 5988
Cross fault detectionYes
Variant
Contact equipping3 NO contacts, 1 NO contact delayed, 1 NC contact as signal contact
Nominal voltageDC 24 V + AC 230 V
Time range0,3 - 3 s
Approvals and MarkingsTÜV, UKCA
VariantAuxiliary supply is not nesseary during elapse of time: tv adjustable. Dual voltage model
The Dold safety relay BO5988.47/124 DC24V+AC230V 0,3-3S is an emergency stop module for use in industrial safety systems. It serves the protective function for personnel and machinery, particularly in emergency stop circuits and for monitoring sliding safety grilles. The device is designed as a safety relay and complies with the requirements of standards EN ISO 13849-1 and IEC/EN 62061. It is designed for use in safety-critical applications where high reliability and fault detection are required.

Applications
This module is used in industrial automation, where it monitors the functions of emergency stop switches and controls safety-relevant switching operations. It is particularly suitable for installations where machine shutdown in hazardous situations is critical, such as in manufacturing, packaging technology, or machine building. The integrated cross-connection detection at the single-button enables detection of incorrect connections in the control circuit, increasing safety.

Functions and equipment in detail
The device features contact configuration with 3 normally closed contacts, one delayed-closing normally closed contact, and one normally open contact as a signaling contact. The delayed closing function enables controlled shutdown, with the time adjustable in the range of 0.3 to 3 seconds. The maximum number of output contacts is 6 normally closed and 1 normally open, with a voltage specification of AC 250 V. The connection technology uses removable screw terminals, suitable for wires with 2 x 1.5 mm² (with ferrule and plastic sleeve DIN 46 228-1/-2/-3/-4) or 2 x 2.5 mm² (with ferrule DIN 46 228-1/-2/-3). The width is 100 mm, making it suitable for standard control panels.

Technology explained simply
The safety relay operates with a dual-voltage design, supporting both DC 24 V and AC 230 V. During the time delay phase, no external power supply is required, increasing the device’s independence from external power sources. The integrated cross-connection detection checks the control circuit for incorrect connections to prevent unwanted switching operations. LED indicators for channel 1, channel 2, and power status enable visual monitoring of the operating state. An integrated short-circuit and overvoltage protection safeguards the device against damage from electrical disturbances.

Compatibility and accessories
The module is designed for 1- or 2-channel wiring, with the 2-channel variant offering a higher safety level. It is equipped with a feedback circuit X1-X2 for monitoring external contactors. The connection terminals are removable, facilitating installation and maintenance. The devices are designed for industrial environments and comply with certifications TÜV, UKCA, and UL-Recognized.

Mounting and installation
Mounting is done in standard control panels with a width of 100 mm. The removable screw terminals allow for flexible and secure wiring. The connection terminals are designed for the specified wire cross-sections, with the use of ferrules and plastic sleeves DIN 46 228-1/-2/-3/-4 recommended. Installation is carried out according to the technical data and instructions in the operating manual.

Advantages in operation
The safety relay offers high reliability by meeting safety standards PL e and Category 4 according to EN ISO 13849-1, as well as SIL 3 according to IEC/EN 62061. The integrated cross-connection detection and feedback circuit increase the safety of the system. The LED indicators enable quick diagnosis of the operating state. The dual-voltage design and delayed closing function provide flexibility in application. The device is designed for use in safety-critical systems, where flawless operation is essential.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1312984
qrcode für Dold 0041510 safety relay BO5988.47/124 DC24V+AC230V