Further information for Dold 0041172 safety relay BD5987.03/001 230V
Technical data
1- / 2-channel
1, 2
Approvals
UL-Recognized
Cat. / PL acc. to EN ISO 13849-1
4/e
Connection
Screw terminals
Output contacts max.
2 NO contacts
SIL CL acc. to IEC/EN 62061
3
SIL acc. to IEC/EN 62061
3
Thermal current Ith max.
10 A
Width
45 mm
Type
BD 5987
Cross fault detection
Suited as safety gate monitor
Variant
Contact equipping
2 NO contacts, 1 signal contact
Nominal voltage
AC 230 V 50/60 Hz
Approvals and Markings
TÜV
Variant
With 2 NO contacts, 1 signalling contact AC/DC 0,1 ... 1 A / 10 ...120 V
The Dold safety relay BD5987.03/001 AC50/60HZ 230V is an emergency stop module for use in safety-oriented systems. It is designed for the safe interruption of circuits, particularly in applications with emergency stop buttons and safety doors. The device is designed for use in industrial environments where the safety of personnel and machinery is paramount. It complies with the requirements of standards EN ISO 13849-1 and IEC/EN 62061 and is therefore suitable for use in safety-critical systems.
Applications
The BD5987.03/001 is used in systems requiring safe shutdown in hazardous situations. This includes, for example, machines with safety doors, where the relay functions as a safety door monitor, or systems with emergency stop functions. It can also be used in elevator installations in accordance with EN 81-20/-50, where it meets the requirements of Directive 2014/33/EU. The 1- or 2-channel wiring allows for flexible integration into existing safety architectures.
Functions and Features in Detail
The device features 2 NO contacts and 1 alarm contact, which are used to control safety functions. The contacts are gold-plated, ensuring reliable switching even under light loads, for example for signals to a PLC. The cross-short detection in the emergency stop control circuit enables detection of short circuits to avoid false alarms or hazardous conditions. The integrated LED indicator for channel 1/2 and power status supports diagnosis and maintenance. The device also offers overvoltage and short-circuit protection to enhance reliability.
Technology Explained Simply
The BD5987.03/001 operates at a rated voltage of AC 230 V 50/60 Hz and is designed for a maximum thermal current load of 10 A. The width is 45 mm, enabling compact mounting in standard control panels. The connection technology uses screw terminals, suitable for stranded wires with 2 x 1.5 mm² or 2 x 2.5 mm² with ferrules and plastic collars according to DIN 46 228-1/-2/-3/-4. The safety functions are certified according to Category 4 / PL e per EN ISO 13849-1 and SIL 3 per IEC/EN 62061, ensuring high safety performance. The automatic enable function or activation via an enable button can be selected depending on the application.
Compatibility and Accessories
The device is suitable for use in 1- or 2-channel safety systems. It can be used as an electronic safety circuit to replace a safety switch according to EN 81-20, section 5.11.2.2. The certifications TÜV and UL-Recognized confirm compliance with international safety standards. Use as a safety door monitor is explicitly intended.
Mounting and Installation
Mounting is carried out in standard control panels with a width of 45 mm. The screw terminals allow for secure and reliable connection of the wires. The terminals are designed for the specified wire cross-sections. Installation is carried out according to the technical specifications in the datasheet, with correct wiring of the safety functions being crucial.
Operational Advantages
The BD5987.03/001 offers high safety performance through certification to Category 4 / PL e and SIL 3. The integrated cross-short detection and LED indicators facilitate diagnosis and maintenance. The gold-plated contacts ensure reliable switching even under low loads. The flexible 1- or 2-channel wiring allows adaptation to different requirements. Compliance with standards EN ISO 13849-1 and IEC/EN 62061 ensures suitability for use in safety-critical applications.