Dold 0040375, EAN: 4030641403751

Dold 0040375 BO5988.61/024 DC24V+AC230V emergency stop module

Industrial Material > Industrial relays and contactors > Safety relay

Dold 0040375 BO5988.61/024 DC24V+AC230V emergency stop module

Lieske Part No. 1312982
Mfg Part No 0040375
EAN-Code 4030641403751
Manufacturer Dold
Here only 628,79 EUR
748,26 EUR incl. VAT

Further information for Dold 0040375 BO5988.61/024 DC24V+AC230V emergency stop module

Technical data
1- / 2-channel1, 2
ApprovalsUL-Recognized
Cat. / PL acc. to EN ISO 13849-14/e
ConnectionPluggable screw terminals
Output contacts max.1 NC contact, 6 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.10 A
Width100 mm
TypeBO 5988
Cross fault detectionYes
Variant
Contact equipping6 NO contacts, 1 NC contact as signal contact
Nominal voltageDC 24 V + AC 230 V
Time rangewithout
Approvals and MarkingsTÜV, UKCA
VariantWithout time delay. Dual voltage model
The Dold BO5988.61/024 DC24V+AC230V is a safety relay from the BO 5988 series, specifically designed for use in emergency stop and safety circuits in industrial automation. It is used for the safe disconnection of machines and systems in case of failure, particularly for monitoring sliding safety guards and emergency stop circuits. The device is designed as a dual-voltage variant, enabling operation with either a direct voltage of 24 V DC or an alternating voltage of 230 V AC. The width is 100 mm, making it suitable for standard control panels.

Applications
This safety relay is used in systems where personnel and machine safety are paramount. Typical applications include monitoring sliding safety guards, emergency stop functions, and safeguarding motion sequences in production systems. The integrated cross-connection detection enables recognition of incorrect connections in the control circuit, increasing the reliability of the circuit. The feedback circuits X1-X2 are used to monitor external contactors to ensure they are operating correctly.

Functions and Equipment in Detail
The device features contact configuration with up to 6 normally open (NO) contacts and 1 normally closed (NC) contact as a signaling contact. The output contacts are rated for a maximum thermal current load of 10 A. Connections are made via removable screw terminals, enabling flexible and secure connections. The terminals are suitable for stranded wires with a cross-section up to 2.5 mm², and also allow the use of ferrules and plastic insulators according to DIN 46 228-1/-2/-3/-4. Integrated LED indicators show the operating status of channels 1 and 2 as well as the power supply.

Technology Explained Simply
The safety relay BO5988.61/024 is designed for 1- or 2-channel wiring, allowing flexible use in different safety concepts. The integrated cross-connection detection monitors the control circuit for unauthorized connections to prevent malfunctions. The integrated short-circuit and overvoltage protection safeguards the device against damage from electrical disturbances. The operating voltage can be selected between 24 V DC and 230 V AC depending on application requirements, facilitating integration into existing systems.

Compatibility and Accessories
The device is designed for use in safety systems according to standards EN ISO 13849-1 and IEC/EN 62061. It complies with Performance Level (PL) e and Category 4 according to EN ISO 13849-1, as well as Safety Integrity Level (SIL) 3 according to IEC/EN 62061. TÜV and UKCA certifications confirm compliance with European safety requirements. The device is UL-Recognized, enabling recognition in the USA and other markets. It can be combined with other components of the BO 5988 series, particularly variants featuring delayed reset function or automatic start function.

Mounting and Installation
Mounting is done in standard control panels with a width of 100 mm. The removable screw terminals facilitate wiring and maintenance. The connection terminals are designed for stranded wires up to 2.5 mm², and also allow the use of ferrules and plastic insulators according to DIN 46 228-1/-2/-3/-4. The LED indicators support commissioning and troubleshooting by visually indicating the operating status.

Advantages in Operation
The safety relay offers high reliability through integrated protection functions such as cross-connection detection, short-circuit and overvoltage protection. The dual-voltage variant enables flexible integration into existing systems. The LED indicators simplify diagnostics and maintenance. Compliance with international safety standards ensures suitability for various markets. The width of 100 mm allows compact mounting in control panels.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1312982
qrcode für Dold 0040375 BO5988.61/024 DC24V+AC230V emergency stop module