Dold 0026431, EAN: 4030641264314

Dold 0026431 BA9036 AC50HZ 220V voltage relay

Dold 0026431 BA9036 AC50HZ 220V voltage relay

Lieske Part No. 1002183
Mfg Part No 0026431
EAN-Code 4030641264314
Manufacturer Dold
Here only 233,82 EUR
278,25 EUR incl. VAT

Further information for Dold 0026431 BA9036 AC50HZ 220V voltage relay

Technical data
1- / 3-phase1
Auxiliary voltageWithout
Enclosure designSwitch cabinet
Nominal voltage max.AC 400 V
Output contacts2 C/O contacts
Width45 mm
TypeBA 9036
Operate delayYes
Variant
Contact equipping2 changeover contacts
Nominal voltageAC 220 V 50 Hz
Time delaywithout
Approvals and MarkingsCCC
VariantUndervoltage relay. Closed circuit operation
The voltage relay BA 9036 from Dold is an undervoltage relay for monitoring single-phase DC and AC power networks. It is used for continuous monitoring of operating voltage in industrial and technical installations to detect voltage dips or failures early. The device operates on the standby current principle, where the contact is closed in the normal state and opens in case of undervoltage. Adjustment is performed via rotary switches on the front panel, ensuring simple and user-friendly configuration. The device is intended for use in enclosures, with a width of 45 mm enabling compact mounting.

Applications
This relay is suitable for use in industrial installations, machine controls, pump and fan systems, as well as in systems requiring high operational safety. It monitors voltages in the range of 24 to 400 V, with the nominal voltage for this variant being AC 220 V at 50 Hz. The maximum nominal voltage is AC 400 V. The devices comply with IEC/EN 60255-1, confirming adherence to international standards for measuring and protective devices in electrical installations.

Functions and Equipment in Detail
The relay features 2 changeover contacts as output contacts, which can be used to control auxiliary circuits or warning signals. The contact configuration allows both closing and opening functions. The pickup delay is built-in and can be adjusted between 0.5 and 10 seconds, with this function only active when the voltage exceeds 60 % of the nominal voltage. The reset values are hysteresis-controlled and range between 75 % and 95 % of the set pickup value, ensuring stable and jerk-free switching operation. The repeatability accuracy is ± 0.5 %, ensuring high precision in repeated measurements.

Technology Explained Simply
The device operates without auxiliary power, meaning it is directly connected to the voltage source to be monitored and does not require additional power supply. Operational readiness is indicated by an LED display, which lights up when the operating voltage is present. A second LED indicates the state of the output relay, i.e., whether the contact is closed or open. For DC voltages above 60 V, an external resistor is required, connected to terminals e and z. The measured voltage is connected to terminals e and f. The use of an external resistor is necessary to reduce the voltage to a level suitable for the device.

Compatibility and Accessories
The relay is designed for use with external resistors, which are required for DC voltages above 60 V. The combination with these resistors enables the relay's application in DC systems with higher voltages.

Mounting and Installation
Mounting is carried out in enclosures, with a width of 45 mm allowing standard installation in DIN or enclosure formats. Connections are made via terminals, with terminals e, f, and z designated for voltage monitoring and the external resistor. Installation requires adherence to safety instructions, particularly when using external resistors, which become very hot during operation and must be mounted with appropriate shielding.

Advantages in Operation
By detecting voltage dips early, the relay enables preventive maintenance and reduces the likelihood of system failures. The LED indicators facilitate diagnosis and fault localization. The adjustable pickup and reset values, as well as the pickup delay, offer flexibility in adapting to different applications. The high mechanical life of 30 million switching operations and the electrical life of 150,000 switching operations at 6 A and AC 230 V ensure long service life. Short-circuit resistance is ensured with a maximum fuse rating of 4 A gG / gL according to IEC/EN 60947-5-1.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002183
qrcode für Dold 0026431 BA9036 AC50HZ 220V voltage relay