| Technical data |
| Enclosure design | Distribution board |
| Output contacts max. | 2 C/O contacts |
| Thermal current Ith max. | 10 A |
| Width | 17,5 mm |
| Type | IK 8802 |
| Variant |
| Contact equipping | 2 changeover contacts |
| Nominal voltage | AC/DC 24 V |
The Dold coupling relay IK8802.12AC/DC24V is an
installation distributor for connecting the control and power level in electrical switchgear. It serves as a
link between a control signal and a load, enabling
potential isolation to ensure electrical safety and galvanic separation. The device is specifically designed for use in industrial and technical installations where reliable signal transmission and load switching are required. The rated voltage is
AC/DC 24 V, with the relay designed for operating voltages ranging from 0.8 to 1.1 times the rated voltage. The maximum thermal current rating (Ith) is
10 A, with the contact configuration consisting of
2 changeover contacts, each rated up to 5 A. The width of
17.5 mm allows for compact mounting on a DIN rail in accordance with IEC/EN 60715, facilitating use in enclosures and distributors.
Applications
The coupling relay IK8802.12AC/DC24V is used in systems where a control signal (e.g. from a PLC, sensor or switch) is to switch a load (e.g. motor, heater, light) via a galvanically isolated circuit. It is particularly suitable for applications in automation technology, building technology, machine construction and industrial controls. The function of
potential isolation protects the control level from disturbances originating from the power level and enables the use of different voltage levels. The
LED indicator (available only for AC/DC 24 V) signals the energized state of the relay, which is helpful during commissioning and maintenance.
Functions and equipment in detail
The relay features a
contact configuration with 2 changeover contacts, each capable of functioning as a make and break contact. The operating and release time is less than 10 ms, enabling rapid response to control signals. The electrical life expectancy is 250,000 switching operations per changeover contact at 3 A and AC 230 V, and 50,000 switching operations for two changeover contacts. The mechanical life expectancy exceeds 50 million switching operations, indicating high robustness. The permissible switching frequency is 3000 switching operations per hour. The switching capacity is defined according to AC 15 (for alternating current) and DC 13 (for direct current), with maximum switching currents of 3 A at AC 230 V and 1 A at DC 24 V.
Technology explained simply
The relay operates with an electromagnetic drive: when the control voltage (AC/DC 24 V) is applied, the armature moves, causing the contacts to switch. The
potential isolation is achieved through galvanic separation between the control and load circuits, preventing disturbances and voltage spikes from the power level from affecting the control. The
LED indicator lights up when the relay is energized, allowing visual verification of the operating state. The
DIN rail mounting enables quick and secure installation in standard enclosures. The terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule), with a tightening torque of 0.8 Nm.
Compatibility and accessories
The relay is suitable for use in systems with rated voltages of AC/DC 12 V, AC/DC 24 V and AC/DC 230 V. It complies with the standards
IEC/EN 61810-1 and
IEC/EN 60947-5-1, which define requirements for relays and switching devices. The switching function is available for low loads (0.1–60 V, 1–300 mA), although the variant IK8802.12AC/DC24V is not specifically designed for low loads. The maximum fuse rating is 6 A gG/gL, defining the short-circuit resistance. The enclosure protection rating is
IP 40, and the terminals are rated
IP 20, suitable for use in enclosed enclosures.
Mounting and installation
Mounting is done via a
DIN rail (DIN 35 mm) in accordance with IEC/EN 60715. The terminals are equipped with self-lifting connection washers, enabling secure and quick connections. Wire connections are made via flat terminals, with tightening torques strictly adhered to (0.8 Nm). The operating temperature range is from -20 °C to +55 °C, and the storage temperature range is from -40 °C to +80 °C. The operating altitude is limited to 2000 m above sea level.
Advantages in operation
The coupling relay IK8802.12AC/DC24V offers high reliability due to its long service life and robust construction. Galvanic isolation increases safety and reduces interference. The LED indicator simplifies diagnostics. The compact design (17.5 mm width) allows dense mounting in enclosures. Compliance with standards IEC/EN 61810-1 and IEC/EN 60947-5-1 ensures suitability for professional installations. The switching function is suitable for a wide range of loads, with the maximum thermal current rating of 10 A (2 x 5 A) sufficient for most applications.