The APC Smart-UPS SMT2200RMI2UC is a line-interactive uninterruptible power supply (UPS) in rackmount format with an output capacity of 2.2 kVA and an output power of 1980 W. It is designed for use in IT infrastructures where continuous power supply for servers, network devices and other critical electronics is required. The device operates with a pure sine wave, suitable for sensitive equipment, and offers a response time of 6 ms to switch immediately to battery mode in case of voltage fluctuations or power outages. The UPS is designed for use in 48,3 cm ( 19 inch ) racks and occupies a height of 2U. The operating temperature ranges from 0 to 40 °C, with relative humidity during operation up to 95 %.
Applications
The SMT2200RMI2UC is suitable for small and medium-sized enterprises as well as IT infrastructures requiring high operational continuity. It is particularly suitable for server rooms, network centers and data centers, where a sudden power failure could lead to data loss or system downtime. The UPS protects connected devices against overvoltage, voltage sags and power outages, thereby extending the lifespan of the devices and preventing damage.
Features and equipment in detail
The device features a total of 9 AC outlets, consisting of 8 IEC 320 C13 sockets and one IEC 320 C19 connector, suitable for powering various IT devices. Additionally, 3 IEC bypass cables are integrated to optimize cabling. The UPS offers a USB port (Type-A) and a serial interface (RS-232), used for communication with the APC PowerChute software, enabling controlled shutdown of connected devices in case of power failure. An LCD display allows the display of operating states, load values and alarms.
Technology explained simply
The UPS operates according to the line-interactive topology, where the mains voltage is normally passed directly to the load. In case of voltage fluctuations, the UPS automatically switches to battery mode, where the battery supplies the load via an inverter with a pure sine wave. The input operating voltage ranges from 151 V to 302 V, and the output voltage ranges from 220 V to 240 V. The total harmonic distortion (THD) of the output voltage is 5 %, which is acceptable for sensitive devices. The battery is a sealed lead-acid (VRLA) with a maximum lifespan of 5 years and a charging time of 3 hours. The battery cartridge RBC43 is user-replaceable, thereby extending the lifespan of the UPS without having to replace the entire unit.
Compatibility and accessories
The UPS is equipped with a SmartSlot, into which an optional network management card (e.g. AP9640 or AP9641) can be inserted. This enables remote monitoring over the network, use of SNMP and integration into management platforms such as EcoStruxure IT. The SmartConnect function allows cloud-based remote monitoring via the APC SmartConnect web portal, enabling the status of the UPS to be monitored from any internet-enabled device. Additionally, an Ethernet LAN port (RJ-45) and a SmartConnect port are available to facilitate integration into existing networks.
Mounting and installation
The UPS is designed for mounting in a 48,3 cm ( 19 inch ) rack and is delivered with a rack mounting kit. The cable length is 2 m, allowing for flexible placement. Installation should be carried out by a qualified electrician to ensure compliance with national and local electrical and safety regulations. The UPS is intended exclusively for indoor use and must not be operated in direct sunlight, in contact with liquids or in environments with excessive dust or humidity.
Advantages in operation
The APC Smart-UPS SMT2200RMI2UC offers reliable power supply with minimal interruption time. The integrated overvoltage protection function protects connected devices from damage caused by lightning strikes or voltage spikes. Remote monitoring via SmartConnect and the ability to replace the battery independently reduce maintenance effort and increase operational safety. The noise emission is 55 dB, which is acceptable for a rack server room. The UPS is equipped with various certifications such as CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, RCM, VDE and WEEE, confirming compliance with European and international standards. The delivery includes a rack mounting kit, a USB cable and an RS-232 cable. A software CD is also included in the delivery scope.
Certification and sustainability
The UPS meets the requirements of the RoHS directive and carries the Green Premium certificate, indicating environmentally friendly manufacturing and disposal. The certifications CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE and WEEE confirm the safety and compliance of the device with international standards. The manufacturer's warranty is 3 years for electronics and 2 years for the battery.