Further information for APC BR650MI UPS 650 VA 6 Outlets
Battery
Battery technology
Sealed Lead Acid (VRLA)
Battery life (max)
5 year(s)
Battery recharge time
12 h
Hot-swap battery
Automatic battery test
Cold start
Certificates
Certification
A-tick, C-tick, CE, EAC, GS Mark, RCM, TISI
Design
Form factor
Tower
Cable length
1.83 m
Cooling type
Passive
Product colour
Black
Display type
LCD
LED indicators
Features
UPS topology
Line-Interactive
Output power capacity
0.65 kVA
Output power
390 W
Waveform
Sine
Input operation voltage (min)
176 V
Input operation voltage (max)
294 V
Input frequency
50/60 Hz
Output frequency
50/60 Hz
Maximum current
10 A
Response time
12 ms
Noise level
45 dB
Surge protection features
Network
Audible alarm modes
Alarm when on battery, Low battery alarm, Overload alarm
Automatic Voltage Regulation (AVR)
ECO mode
Surge protection
Audible alarm(s)
Logistics data
Harmonized System (HS) code
85078000
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Storage temperature (T-T)
-15 - 45 °C
Operating relative humidity (H-H)
0 - 95%
Storage relative humidity (H-H)
0 - 95%
Operating altitude
0 - 3000 m
Non-operating altitude
0 - 15000 m
Other features
Nominal output voltage
230 V
Nominal input voltage
230 V
Packaging content
Cables included
USB cable
Management card included
Manual
Packaging data
Package width
440 mm
Package depth
143 mm
Package height
255 mm
Package weight
7.4 kg
Ports & interfaces
AC outlet types
C13 coupler
Power plug
C14 coupler
AC outlets quantity
6 AC outlet(s)
USB 2.0 ports quantity
1
Ethernet LAN (RJ-45) ports
2
Cabling technology
10/100/1000Base-T(X)
USB port
SmartSlot
SmartConnect port
Sustainability
Sustainability certificates
Green Premium
Weight & dimensions
Width
91 mm
Depth
310 mm
Height
190 mm
Weight
6.4 kg
The APC Back-UPS PRO BR650MI is a line-interactive UPS in tower format, designed for protecting computers, network devices, and other sensitive electronic systems in home environments and home offices. With an output capacity of 0.65 kVA and an output power of 390 W, it provides sufficient power supply for typical workstations, including PC, monitor, router, modem, or small NAS systems. The UPS operates with a simulated sine wave (stepped approximation to a sinewave), which is sufficient for most IT devices, and features automatic voltage regulation (AVR) that corrects voltage fluctuations in the grid without discharging the battery. This extends the battery lifespan and maximizes runtime during power outages.
Applications
The BR650MI is particularly suitable for use in offices, home offices, small server rooms, or for private users requiring reliable power supply for sensitive devices. It protects against short-term power outages, voltage surges, and sags caused by lightning strikes or grid disturbances. The integrated overvoltage protection function for network cables (10/100/1000Base-T(X)) also secures data connections via Ethernet ports. Typical application scenarios include operating PC systems, network devices, media boxes, or small storage systems.
Functions and Equipment in Detail
The UPS features 6 AC outlets with C13 connectors, all equipped with battery and overvoltage protection. Power supply is via a C14 plug with a cable length of 1.83 m. An integrated LCD display shows operational status, remaining runtime, and other relevant information. Additionally, LED indicators and acoustic alarms signal battery operation, low battery charge, or overload. The UPS supports ECO mode, which increases energy efficiency by not activating the battery during stable grid voltages.
Technology Explained Simply
The line-interactive topology enables a rapid response to grid disturbances. The response time is up to 12 ms, sufficient for most IT devices to switch to battery operation without data loss. The automatic voltage regulation (AVR) corrects voltages in the range of 176 V to 294 V without discharging the battery. This protects connected devices and extends battery lifespan. The battery technology is based on sealed lead-acid (VRLA), which is maintenance-free and leak-proof. Maximum battery lifespan is 5 years, with a recharge time of 12 hours. A hot-swap battery system allows battery replacement without shutting down the UPS or connected devices.
Compatibility and Accessories
The BR650MI is equipped with a USB port, enabling the PowerChute software (included in delivery) to automatically shut down PC or NAS systems in case of imminent battery failure. Two Ethernet LAN ports (RJ-45) provide overvoltage protection for network cables. As suitable accessories, the UPS ValuePRO VP700ELCD 390 W Line-Interactive is offered. As an alternative, the UPS BR650G2I BackUPS PRO 650 VA/230 V IEC C13 USB Tower is mentioned.
Mounting and Installation
The UPS is designed in tower format and can be placed on a desk or in a shelf. Installation involves connecting to a power outlet and linking devices to the C13 outlets. Software installation via USB requires a connection to the computer. The UPS is designed for indoor operation, with an operating temperature of 0 to 40 °C and relative humidity of 0 to 95 %. Cooling is passive, without fans.
Operational Advantages
The BR650MI provides reliable protection against power outages and voltage fluctuations. The integrated AVR technology ensures stable voltage without stressing the battery. The hot-swap function enables easy battery replacement, extending the UPS lifespan. The combination of LCD display, acoustic alarms, and USB control ensures transparent and user-friendly operation. The UPS is certified according to A-tick, C-tick, CE, EAC, GS Mark, RCM, and TISI. The delivery includes a USB cable and the operating manual. The warranty is 3 years, with a 3-year repair or replacement warranty for EU countries. The UPS is equipped with a device protection insurance coverage of 150,000 euros.