Further information for ABB 2CDS251001R0014 Circuit Breaker 1-pole 1A
General
Release characteristic
C
Number of poles (total)
1
Number of protected poles
1
Rated current
1
Rated voltage
230
Rated insulation voltage Ui
440
Rated impulse withstand voltage Uimp
4
Rated short-circuit breaking capacity Icn EN 60898 at 230 V
6
Rated short-circuit breaking capacity Icn EN 60898 at 400 V
6
Voltage type
AC/DC
Frequency
60
Current limiting class
3
Over voltage category
3
Pollution degree
3
Width in number of modular spacings
1
Built-in depth
69
Degree of protection (IP)
IP20
Ambient temperature during operating
55
Connectable conductor cross section multi-wired
25
Connectable conductor cross section solid-core
35
Power loss
1.4
Concurrently switching N-neutral
Additional equipment possible
Explosion-proof
Flush-mounted installation
The ABB circuit breaker type S201-C1 is a 1-pole circuit protection switch with a rated current of 1 A, designed for use in electrical installations to provide protection against overload and short circuit. It belongs to the S 200 series and complies with standards DIN VDE 0100-430, DIN VDE 0100-530, DIN VDE 0641-11 (or IEC/EN 60898-1), DIN VDE 0660-101 (or IEC/EN 60947-2) as well as UL1077. The C tripping characteristic ensures an appropriate response to load fluctuations and short circuits in typical consumer systems. The device is designed for a rated voltage of 230 V, with a rated insulation voltage Ui of 440 V. The rated impulse voltage withstand is 4 kV, providing sufficient electrical strength for indoor use. The switching capacity (Icn) is 6 kA at 230 V and 6 kA at 400 V, ensuring suitability for networks with medium short-circuit power. Energy limitation class 3 indicates the switch’s ability to limit energy during a short circuit, enhancing safety in fault conditions.
Applications
The S201-C1 is intended for use in electrical distribution systems indoors, particularly in residential and commercial buildings. It protects wiring and cables in accordance with applicable regulations and is designed for mounting in modular enclosures. The protection rating IP20 protects against contact with fingers and ingress of solid foreign objects larger than 12.5 mm, but not against water or dust. The ambient temperature during operation must not exceed 55 °C, defining the operational limits in heated rooms. The overvoltage category 3 and pollution degree 3 indicate use in environments with moderate contamination, such as residential or office buildings.
Functions and Equipment in Detail
The device features a patented connection terminal that enables secure and easy connection. The connection is made via a pressure plate, ensuring a reliable connection even with different conductor cross-sections. The cable entry is located above the phase bar entry, simplifying wiring and improving visibility. The maximum connection capacity is 35 mm² for single-strand conductors and 25 mm² for multi-strand conductors. The terminal insulation corresponds to protection class IP20. The mounting depth is 69 mm, and the device occupies 1 module width, making it suitable for standard distribution boxes. The voltage type is AC/DC, and the frequency is 60 Hz. The power loss of the device is 1.4 W.
Technology Explained Simply
The C tripping characteristic means the switch trips within seconds at a current of approximately 5 to 10 times the rated current (here 1 A), which is typical for consumer installations. The rated switching capacity of 6 kA at 230 V and 400 V shows the switch’s ability to interrupt short circuits in networks with this power level. Energy limitation class 3 means the switch limits energy during a fault, reducing thermal stress in fault conditions. The IP20 protection rating protects against direct contact with moving parts and ingress of solid foreign objects, but not against water or dust. Overvoltage category 3 refers to the maximum voltage the device can withstand in a specific network section, here in a range typical for end-user installations.
Compatibility and Accessories
The device is designed for use in modular enclosures and can be combined with various accessories to optimize installation. Compatible accessories include busbars such as PS3/60 (3-phase, 10 mm², 60 modules), PS3/12 (with end cap), PS3/9 and PS3/6 in the Compact system, as well as modular terminals CMS-101PS and CMS-102PS. Additionally, the 710SPM three-phase set 10 mm² (1056 mm long) is available for the COMPACT system. These components enable flexible and secure wiring within the distribution board. The possibility to integrate additional equipment extends the switch’s functionality according to requirements.
Mounting and Installation
The S201-C1 is designed for mounting in modular enclosures and does not require recessed mounting. The mounting depth of 69 mm must be considered during distribution board planning. The connection terminal allows direct connection with conductors up to 35 mm² (single-strand) or 25 mm² (multi-strand), with the terminal insulation ensuring IP20 protection. The positioning of connection openings (cable above, phase bar below) simplifies wiring and improves clarity. Mounting is done in standard distribution boxes that support a width of 1 module.
Operational Advantages
The S201-C1 provides reliable protection for electrical wiring and cables. The patented connection terminal ensures a secure and easy connection that remains stable even during frequent maintenance. Compliance with international standards such as IEC/EN 60898-1 and UL1077 enables worldwide use. Triple testing before shipment ensures high quality and reliability. Compatibility with various accessories from the System Compact allows flexible and application-specific installation. The IP20 protection rating and the specified ambient temperature of 55 °C clearly and safely define the application area.