Zyxel 91-010-203001B, EAN: 4718937510337

Zyxel 91-010-203001B SFP Transceiver 10 km

Networks > Switches > Modules

Zyxel 91-010-203001B SFP Transceiver 10 km

Lieske Part No. 786713
Mfg Part No 91-010-203001B
EAN-Code 4718937510337
Manufacturer Zyxel
Here only 45,23 EUR
53,82 EUR incl. VAT

Further information for Zyxel 91-010-203001B SFP Transceiver 10 km

Certificates
CertificationClass 1 Laser 21 CFR 1040.10 & 1040.11 CSA TUV
Features
Hot-swapYes
Logistics data
Harmonized System (HS) code85369010
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95%
Other features
Dimensions (WxDxH)56 x 13.4 x 12.46 mm
Performance
Maximum data transfer rate1000 Mbit/s
Maximum transfer distance10000 m
Wavelength1310 nm
Technical data
TechnologyLC fibre optic LWL
GBIC application siteStandard
GBIC compatibilityuncoded
SFPSFP
Speed Mini-GBIC1000Mbit
ModeSinglemode LX
Distance10km
Weight & dimensions
Width56 mm
Depth13.4 mm
Height12.5 mm
The Zyxel SFP-LX-10-D is a network transceiver module in SFP format (Small Form-factor Pluggable), designed for use in Gigabit Ethernet networks. It serves as an SFP module for connecting network devices via fiber optic cables and enables a data transfer rate of 1000 Mbit/s. The module is designed for operation in SFP slots of switches, routers, or other network devices and supports the 1000Base-LX standard, specified for single-mode fiber optic cables. The maximum transmission distance is 10 km, with transmission over single-mode fiber optic cable (long-wavelength waveguide) at a wavelength of 1310 nm. This technology is particularly suitable for longer distances, as it exhibits lower attenuation losses compared to multi-mode fiber optic cables.

Applications

The module is used in network infrastructures where high bandwidth and a transmission range of up to 10 km are required. Typical use cases include connecting switches in different buildings, linking remote sites to a central network, or extending LANs over larger distances. Due to compatibility with industry standards such as IEEE 802.3z and the SFP MSA (Multi-Source Agreement), it can be interoperably operated with devices from various manufacturers, increasing flexibility in network planning.

Functions and Features in Detail

The module is hot-swappable, meaning it can be replaced during the operation of a network device without interrupting service. This is particularly advantageous for maintenance tasks and rapid fault resolution. The compact design with dimensions of 56 x 13.4 x 12.46 mm enables high port density in switches, allowing more connections in limited space. The module features an LC connector, which is standard for connecting to single-mode fiber optic cables.

Technology Explained Simply

The technology is based on single-mode fiber optic technology (LX), in which a single light mode is transmitted through the fiber optic cable. This enables lower signal distortion and greater reach compared to multi-mode fiber optic cables. The wavelength of 1310 nm is in the range of lowest attenuation in single-mode fibers and is therefore preferred for distances up to 10 km. The module is powered by a +3.3 V power supply, provided through the SFP slot of the network device. Low power consumption and low power loss contribute to operational efficiency.

Compatibility and Accessories

The module is compatible with devices that support SFP slots, particularly with switches offering Gigabit Ethernet ports with SFP interfaces. It is designed for use in standard network environments and complies with Class 1 Laser standards according to 21 CFR 1040.10 & 1040.11, as well as certifications CSA and TUV. In Zyxel’s product line, additional SFP modules with different transmission ranges are available, such as models with 20 km, 40 km, or 80 km, which can be selected based on requirements.

Installation and Mounting

Installation is performed by simply inserting the module into the SFP slot of the network device. No additional tools or configurations are required. Connection to the fiber optic cable is made via the integrated LC connector. The operating temperature range is 0 to 70 °C, and the storage temperature range is -40 to 85 °C, making the module suitable for environments with moderate temperature fluctuations. The relative humidity during operation is 5 to 95 %, enabling broad applicability in various indoor conditions.

Operational Advantages

Thanks to hot-swap capability and compact design, the module offers high availability and flexibility. Standard compatibility with IEEE 802.3z and SFP MSA ensures easy integration into existing networks. Low power consumption and low power loss contribute to energy efficiency. The maximum reach of 10 km over single-mode fiber optic cable makes it particularly suitable for applications requiring high bandwidth over long distances, without the need for additional amplifiers or regenerators.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/786713
qrcode für Zyxel 91-010-203001B SFP Transceiver 10 km