Xaver Bechtold 10291806

Xaver Bechtold 10291806 control cable YSLY-JB 4X35

Cables > Control line > Flexible Control lines

Xaver Bechtold 10291806 control cable YSLY-JB 4X35

Lieske Part No. 451437
Mfg Part No 10291806
EAN-Code
Manufacturer Xaver Bechtold
Here only 37,40 EUR
44,51 EUR incl. VAT

Further information for Xaver Bechtold 10291806 control cable YSLY-JB 4X35

General
Nominal voltage300/500 V
Test voltage4000 V
Temperature range-40 to +80 °C
Temperature range in motion-5 to +70 °C
Fixed bending radius4 x cable diameter
Bend radius flexible15 x cable diameter
Flame retardancyVDE 0472 T. 804 test type B (IEC 332-1)
Chemical resistanceResistant to acids, alkalis, certain hydrocarbon compounds
Conductor markingVDE 0293-308 JB
Conductor materialCopper stranded wire, bare, fine-stranded
Conductor classVDE 0295 Class 5
Insulating materialPVC
Material outer sheathPVC
Sheath colourGrey
Number of conductors4
Core cross section35 mm²
Protective conductorGreen-yellow
Applicationmachine tools, conveyor and assembly lines, material handling systems, plant engineering
Installation methodfixed and flexible, without tensile stress
Environmental conditionsdry, damp, wet, medium mechanical stress
Cable typeYSLY control cable
ApprovalVDE 0295 Class 5, VDE 0293-308, VDE 0472 Part 804 Test type B
The control cable YSLY-JB 4X35 from Xaver Bechtold is a flexible connection and supply cable for use in industrial electrical engineering. It is used to connect control devices in machine tools, conveyor and assembly lines, material handling systems, and general plant construction. The cable is designed for fixed installation and flexible applications, where movements must occur without tensile stress and without forced guidance. It can be used in dry, damp, and wet rooms, provided mechanical stresses are moderate.

Applications
This control cable is designed for use in production plants and manufacturing environments where reliable signal and power transmission between control and drive components is required. It is particularly suitable for installations where the cable is moved, but does not experience direct tensile load. Use in rooms with increased humidity or occasional dampness is possible, as the cable is protected against moisture.

Functions and Features in Detail
The cable has four conductors, each with a cross-section of 35 mm². The conductors are made of bare, fine-stranded copper wires according to VDE 0295 Class 5, ensuring high flexibility and durability under movement. The conductors are insulated with PVC and colour-coded according to VDE 0293-308. The designation JB indicates that the cable includes coloured conductors and a green-yellow protective conductor. The conductors are stranded in layers, which ensures even distribution of mechanical stress and improved flexibility.

Technology Explained Simply
The cable sheath is made of PVC and is grey in colour. It protects the conductors from external influences such as mechanical stress, moisture, and chemical substances. The rated voltage is 300/500 V, which is sufficient for most industrial control applications. The test voltage is 4000 V, highlighting the electrical strength of the insulation. The cable is flame-retardant according to VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1), meaning it is either non-combustible or only limitedly combustible in case of fire and does not release conductive droplets.

Compatibility and Accessories
The control cable is suitable for use with standard connectors, terminals, and other connection elements in industrial applications. The use of appropriate cable lugs, screw terminals, or crimp connectors is recommended to ensure a secure and durable connection. The cable can be combined with other YSLY control cables, provided technical requirements such as voltage, cross-section, and environmental conditions are compatible.

Installation and Mounting
During installation, the specified bending radii must be observed. For fixed installation, the minimum bending radius is 4 times the cable diameter; for flexible applications, it is 15 times. The cable must not be pulled or overloaded to avoid premature damage. Installation is typically carried out in cable ducts, conduits, or open routing, depending on environmental conditions and protection requirements.

Operational Advantages
The YSLY-JB 4X35 offers high mechanical and chemical resistance. It is largely resistant to acids, alkalis, and certain hydrocarbon compounds, making it suitable for use in chemically demanding environments. The temperature resistance ranges from -40 °C to +80 °C for fixed installation and from -5 °C to +70 °C for moving applications. The combination of flexible structure and high electrical strength makes this cable a reliable solution for industrial control applications.

Protection Rating
The cable is not designed as an IP-rated product, but meets the requirements for control cables used in dry, damp, and wet rooms. The PVC insulation and sheath provide sufficient protection against moisture and minor mechanical stresses.

Operating Voltage
The rated voltage of 300/500 V is suitable for most control and signal applications in industrial environments. The test voltage of 4000 V demonstrates the high electrical insulation strength.

Temperature Range
The cable can be used in the temperature range of -40 °C to +80 °C for fixed installation. For moving applications, the range is -5 °C to +70 °C.

Bending Radius
The minimum bending radius is 4 times the cable diameter for fixed installation and 15 times for flexible applications.

Flame Retardancy
The cable is flame-retardant according to VDE 0472 Part 804, Test Method B (IEC 332-1), meaning it has limited flammability and does not release conductive droplets in case of fire.

Chemical Resistance
The cable is largely resistant to acids, alkalis, and certain hydrocarbon compounds, making it suitable for use in chemically demanding environments.

Conductor Identification
The conductors are colour-coded according to VDE 0293-308, with the designation JB indicating coloured conductors and a green-yellow protective conductor.

Conductor Material
The conductors are made of bare, fine-stranded copper wires according to VDE 0295 Class 5, ensuring high flexibility and durability under movement.

Insulation Material
The conductors are insulated with PVC, which provides good electrical insulation and mechanical strength.

Sheath Material
The sheath is made of PVC and is grey in colour, providing good visibility and protection.

Application Area
The cable is suitable for use in machine tools, conveyor and assembly lines, material handling systems, and plant construction.

Installation Method
The cable is suitable for fixed installation and flexible applications, where movements must occur without tensile stress and without forced guidance.

Environmental Conditions
The cable can be used in dry, damp, and wet rooms under moderate mechanical stress.

Cable Type
The cable is a YSLY control cable designed for industrial control applications.

Protective Conductor
The cable includes a green-yellow protective conductor, marked according to VDE 0293-308.

Number of Conductors
The cable has four conductors, each with a cross-section of 35 mm².

Colour
The cable sheath is grey.

Connection Technology
The cable can be connected using standard connectors, terminals, and other connection elements in industrial applications.

Certification
The cable complies with standards VDE 0295 Class 5, VDE 0293-308, and VDE 0472 Part 804, Test Method B (IEC 332-1).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/451437
qrcode für Xaver Bechtold 10291806 control cable YSLY-JB 4X35