| General |
| Nominal voltage | 300/500 V |
| Test voltage | 4000 V |
| Temperature range in motion | -5 °C |
| Temperature range, non-operating | -40 °C |
| Bend radius for fixed installation | 4 x cable diameter |
| Bend radius flexible | 15 x cable diameter |
| Flame retardancy | according to VDE 0472 T. 804 test type B (IEC = 332-1) |
| Conductor | Copper stranded wire, bare, fine-stranded |
| Conductor class | VDE 0295 Class 5 |
| Wire insulation | PVC |
| Conductor marking | VDE 0293-308 |
| Protective conductor | Green-yellow |
| Material outer sheath | PVC |
| Sheath colour | Grey |
| Number of conductors | 4 |
| Core cross section | 1,5 mm² |
| Print on jacket | designation, dimension, VDE registration no. |
| Features | resistant to acids, alkalis, hydrocarbon compounds |
The control cable YSLY-JZ 4X1,5 from Xaver Bechtold is a flexible cable designed for use in industrial plants, particularly in machine tools, conveyor and assembly lines, material handling systems, and general plant engineering. It is suitable for both fixed installation and flexible applications, where the cable moves freely without tensile stress and without forced guidance, subject to moderate mechanical stress. The cable can be used in dry, damp, and wet rooms, making it suitable for a wide range of industrial environments.
Applications
This control cable is designed for use in industrial control systems where reliable and durable signal transmission is required. It is commonly used in production plants, automation systems, and machine controls, where the cable is either fixed or installed in moving parts such as swing arms, lifting mechanisms, or movable assembly units. Use in wet rooms is possible, as the cable is resistant to moisture and dampness.
Functions and Equipment in Detail
The cable consists of four conductors, each with a cross-section of 1.5 mm², one of which is a green-yellow protective earth conductor. The conductors are marked with a continuous digit numbering, enabling easy identification and wiring. The conductors are made of bare, fine-stranded copper wires according to VDE 0295 Class 5, ensuring high flexibility and long service life under frequent bending. The conductors are insulated with PVC, and the entire cable core is stranded in layers to ensure even distribution of mechanical stress. The outer sheath is also made of PVC and is grey in colour. The designation, dimensions, and VDE registration number are printed on the sheath, enabling easy identification and documentation.
Technology Explained Simply
The rated voltage of the cable is 300/500 V, making it suitable for most industrial control applications. The test voltage is 4000 V, highlighting the electrical strength of the insulation. The temperature resistance ranges from -5 °C to +70 °C for flexible installation and from -40 °C to +80 °C for fixed installation, enabling broad application in different environments. The bending radius is 4 times the cable diameter for fixed installation and 15 times for flexible applications, defining the mechanical load capacity. The flame retardancy corresponds to test method B according to VDE 0472 Part 804 (equivalent to IEC 332-1), meaning the cable does not contribute to rapid flame spread in case of fire. The cable is largely resistant to chemicals such as acids, alkalis, and certain hydrocarbon compounds, making it suitable for environments with chemical exposure.
Compatibility and Accessories
The control cable YSLY-JZ 4X1,5 is compatible with standard connectors and cable glands designed for PVC-sheathed cables. It can be combined with other cables of the same type to build larger cabling systems. The conductor marking according to VDE 0293-308 enables unambiguous assignment and simplifies installation and maintenance. The cable is available on a reel with a length of 500 metres, making it suitable for larger projects.
Installation and Mounting
Installation is typically carried out by qualified personnel in electrical or plant engineering. The cable can be installed in ducts, trenches, or openly. For flexible applications, the bending radius of 15 times the cable diameter must be maintained to avoid mechanical damage. For fixed installation, a bending radius of 4 times is sufficient. Connection to control devices is made via suitable connectors or terminals, with correct conductor assignment ensured by the digit marking.
Advantages in Operation
The control cable offers high mechanical and chemical resistance, increasing service life and reliability in industrial applications. The clear conductor marking simplifies installation and maintenance. The flame-retardant design enhances operational safety, especially in enclosed spaces or areas with increased fire risk. The temperature resistance allows use in a wide range of environments, from cool production halls to warm machine rooms.