Wago primary switched mode power supplies ECO output voltage DC 24 V 2.5 A no-load and short-circuit protection Adjustable output voltage LED status indicators for TS 35 CAGE CLAMP ® connector RoHS Compliant
General technical data;
Nominal input voltage Vin rated 230 V
Input voltage range 85 V ... 264 V (with derating -3% / V (<90 V))
Frequency 47 Hz ... 63 Hz
Input current Ie 0.7 A typical at 230 V AC
Inrush current <30 Ap
Power failure bypass

20 ms at AC 230 V

Rated output voltage Vout DC 24 V
Output voltage range 22 V DC ... 28 V adjustable
Output current Io 2.5 A at 24 V DC
Ripple <100 mVpp to 20 MHz
Derating 3.3% / K (> 55 ° C at 230 V AC)
Deviation max. 1%
Current limitation in the range 1.15 .. 1.4 x Ia
Efficiency typ 82%
Test voltage primary. - PE 1.5 kV
Test voltage primary. - Sec 3 kV
Test voltage sec - PE 0.5 kV
Degree of protection IP 20
Status display Green LED (24 V DC OK) LED red (overload)
Mounting DIN-rail mounting (DIN EN 50022)
Ambient temperature -10 ° C ... +70 ° C
Storage temperature -25 ° C ... +85 ° C
Standards / EN 60950, EN 61000-6-2, EN 61000-6-3
Dimensions, Height [mm] 92 Width [mm] 50 mm Depth [mm] 136 mm
Type: 787-712 Quantity: 1 ea.