Technical Data:

• 031-1BB30

Type:

• SM 031 - Analog Input

Module ID:

• 0401 15C3

General Information:

• Note: -
• Features: 2x AI, 12 Bit, Voltage 0…10 V

• Current consumption from backplane bus: 80 mA
• Power loss: 0.7 W

Technical Data Analog Inputs:

• Number of inputs: 2
• Cable length, shielded: 200 m
• Rated load voltage: DC 24 V
• Current consumption from load voltage L+ (without load): 15 mA
• Voltage inputs: yes
• Min. input resistance (voltage range): 100 kOhm
• Input voltage ranges: 0 V ... +10 V
• Operational limit of voltage ranges: +/-0.3%
• Operational limit of voltage ranges with SFU: -
• Basic error limit voltage ranges: +/-0.2%
• Basic error limit voltage ranges with SFU: -
• Destruction limit voltage max.: 30 V
• Current inputs: -
• Max. input resistance (current range): -
• Input current ranges: -
• Operational limit of current ranges: -
• Operational limit of current ranges with SFU: -
• Basic error limit current ranges: -
• Radical error limit current ranges with SFU: -
• Destruction limit current inputs (voltage): -
• Destruction limit current inputs (electrical current): -
• Resistance inputs: -
• Resistance ranges: -
• Operational limit of resistor ranges: -
• Operational limit of resistor ranges with SFU: -
• Basic error limit: -
• Basic error limit with SFU: -
• Destruction limit resistance inputs: -
• Resistance thermometer inputs: -
• Resistance thermometer ranges: -
• Operational limit of resistance thermometer ranges: -
• Operational limit of resistance thermometer ranges with SFU: -
• Basic error limit thermoresistor ranges: -
• Basic error limit thermoresistor ranges with SFU: -
• Destruction limit resistance thermometer inputs: -
• Thermocouple inputs: -
• Thermocouple ranges: -
• Operational limit of thermocouple ranges: -
• Operational limit of thermocouple ranges with SFU: -
• Basic error limit thermocouple ranges: -
• Basic error limit thermocouple ranges with SFU: -
• Destruction limit thermocouple inputs: -
• Programmable temperature compensation: -
• External temperature compensation: -
• Internal temperature compensation: -
• Temperature error internal compensation: -
• Technical unit of temperature measurement: -
• Resolution in bit: 12
• Measurement principle: successive approximation
• Basic conversion time: 2 ms all channels
• Noise suppression for frequency: >50dB at 50Hz (UCM < 2V)

• Status display: yes
• Interrupts: no
• Process alarm: no
• Diagnostic interrupt: no
• Diagnostic functions: yes
• Diagnostics information read-out: possible
• Module state: green LED
• Module error display: red LED
• Channel error display: red LED per channel

Isolation:

• Between channels: -
• Between channels of groups to: -