Application:

Halogen-free installation cable with static shielding and improved fire performance for telecommunications and information processing systems. This cable is used for telephone, measurement and signal transmission, in the construction of intercoms and extensions for telecommunications systems of all classes in dry and damp operating locations.
Installation on, in and under plaster is permitted. The static shielding reliably limits external electromagnetic interference alternating fields. There is no fire damage caused by halogen-containing gases, and the smoke development is minimal.
Structure:
Conductor: bare copper conductor, single-wire,
0.6 or 0.8 mm diameter
Core insulation: cross-linked polymer HI1
in accordance with VDE 0207 Part 23
Core identification: in accordance with VDE 0815
Stranding: 4 cores to a star quad and
5 star quads to a bundle
Bundles in layers Banding
Static shield: plastic-coated metal foil
(metal side inside) and
bare drain wire
Outer jacket: Polyolefin mixture HM2 in accordance with
VDE 0207 Part 24 halogen-free
and flame-retardant
Jacket color: gray RAL 7001 or red as
a fire alarm cable
Technical data: 0.6 mm 0.8 mm
Nominal voltage: 300 V 300 V
Test voltage: 800 V 800 V
Loop resistance: 130 Ohm/km 73.2 Ohm/km
Current carrying capacity: 2.5 A 5.1 A
Operating capacitance: 120 nF/km 100 nF/km
Insulation resistance: 100 MOhm x km 100 MOhm x km
Capacitive coupling K1 300 pF 300 pF
(100 m, 800 Hz): K9-12 100 pF 100 pF
Line attenuation: approx. 1.7 dB/km 1.1 dB/km (800Hz)
Temperature range: - 5 °C - + 50 °C
Operating temperature: + 70 °C (max.)
Bending radius: 7.5 x cable diameter
2.5 x cable diameter for
a single bend without tension
Burning behavior: in accordance with VDE 0472 T.
804 test type C (=IEC 332-1)
Properties:
halogen-free, low fire propagation, minimal smoke
development, no corrosive gases.