VDE-Kabel H07V-U1,5WS-R100, EAN: 4013728021659

VDE-Kabel H07V-U 1,5 WS Cable white 100m

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-U / R

VDE-Kabel H07V-U 1,5 WS Cable white 100m

Lieske Part No. 679065
Mfg Part No H07V-U1,5WS-R100
EAN-Code 4013728021659
Manufacturer VDE-Kabel
Here only 27,73 EUR
33,00 EUR incl. VAT

Further information for VDE-Kabel H07V-U 1,5 WS Cable white 100m

General
ConductorCopper bare, solid
InsulationPVC according to VDE 0207
Sheath colourwhite (RAL 9010)
Nominal voltage450/750 V
Test voltage2500 V
Installation temperature range+5 °C - +70 °C
Temperature range after installation-30 °C - +70 °C
Operation temperature+70 °C
Bending radius15 x cable diameter
Flame retardancyaccording to VDE 0472 T. 804 test type B (=IEC 332-1)
The H07V-U 1.5 WS-R100 is a PVC-insulated wiring cable from manufacturer VDE-Kabel, designed for use in electrical installations indoors. This cable is intended for installation in conduits, on, in, and under plaster, as well as in closed installation channels. It is also suitable for internal wiring of devices, control panels, and distributors, and can be used in protected installations within and on luminaires. The cable is not suitable for direct installation on trays, gutters, or troughs.

Applications
This cable is intended for stationary electrical installations indoors, particularly in residential and commercial buildings. It is suitable for connecting consumers, switches, socket outlets, and other electrical components within installation systems. Installation typically occurs in closed conduits, where the cable is protected from mechanical stress and environmental influences. The cable is not intended for outdoor use or in damp rooms without additional protection.

Functions and Features in Detail
The cable consists of a bare, single-strand copper conductor, insulated with PVC according to VDE 0207. The sheath colour complies with standard VDE 0293-308, with the colour being white (RAL 9010). The PVC insulation ensures good electrical insulation and mechanical stability. The cable is rated for a nominal voltage of 450/750 V, making it suitable for use in typical low-voltage electrical installations. The test voltage is 2500 V, highlighting the electrical strength of the insulation.

Technical Explanation
The maximum operating temperature of the cable is +70 °C, and during installation, the cable must withstand temperatures from +5 °C to +70 °C. After installation, the cable can be exposed to temperatures from -30 °C to +70 °C, allowing use in rooms with seasonal temperature fluctuations. The minimum bending radius is 15 times the cable diameter, which must be considered during installation to maintain mechanical integrity. Flame retardancy corresponds to test method B according to VDE 0472 Part 804 (equivalent to IEC 332-1), meaning the cable does not drip flaming particles and does not propagate flame during a flame test.

Compatibility and Accessories
The cable is designed for use in standard installation systems and can be connected with common installation screws, socket outlets, switches, and distributors. It is not intended for use in explosive environments or in areas with aggressive chemicals. Installation must comply with applicable regulations and standards for electrical installations, particularly VDE 0100 and VDE 0107.

Installation and Mounting
Installation is carried out in closed conduits, pipes, or within walls under plaster. The cable must be installed to avoid mechanical stress. The bending radius of 15 times the cable diameter must be observed to prevent cracks or breaks in the insulation material. Installation is typically performed using tools such as cutters, pliers, and cable cutters. The cable is not suitable for direct installation on open routes such as trays or gutters.

Operational Advantages
The cable offers high electrical insulation and mechanical stability. The PVC insulation ensures long service life and resistance to environmental influences within the specified temperature range. Flame retardancy according to VDE 0472 Part 804, test method B, enhances operational safety. The cable is suitable for use in standardised electrical installations and meets the requirements of applicable standards for installation cables.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/679065
qrcode für VDE-Kabel H07V-U 1,5 WS Cable white 100m